Leaching of zinc sulfide concentrate from the ganesh-himal deposit of nepal

The leaching of zinc concentrate obtained from the zinc ore located in the Ganesh-Himal region of Nepal has been carried out in the presence of ammonium persulfate (APS) as an oxidant. Leaching variables such as time, temperature, acid, and oxidant concentration, E _h , and particle size of sphalerite concentrate were studied to optimize the condition and to understand the mechanism of the reaction. The zinc extraction increased up to a temperature of 333 K and a further rise in the temperature to 343 K resulted in lowering of metal extraction. A decrease in particle size and increase in oxidant concentration enhanced the dissolution rate of zinc. The leaching data best fitted to the mixed controlled kinetic model. An activation energy of 43 kJ/mol was obtained for the dissolution of zinc in the temperature range 303 to 333 K with APS. The leaching mechanism was further established by characterizing the original concentrate and the leach residue by X-ray diffraction (XRD) phase identification and scanning electron microscopy (SEM) studies.     

Enhanced visible green and 1.5 μm radiative emission of Er~(3+) ions in Li_2O-PbO-Al_2O_3-B_2O_3 glasses for photonic applications

A series of Er~(3+) ions doped lithium lead alumino borate(LiPbAlB) glasses were synthesized via melt quench method and their structural,physical and optical properties were studied.Judd-Ofelt theory in correlation with the emission and absorption profiles was performed for the measurement of various radiative parameters for different transitions of Er~(3+) doped glasses.The as-prepared glasses show deep green(550 nm) as well as NIR(1532 nm) emission at 380 and 980 nm excitation wavelengths,respectively.The intensity of emission spectra increases with Er~(3+) ions concentration up to 1.5 mol% and beyond quenching is observed.The Dexter theory applied to the emission profiles reveals the interaction between Er~(3+)ions as dipole-dipole in nature.CIE color coordinates are found to fall in the green region of the visible spectrum.It is observed that 1.5 mol% of Er~(3+) ions concentration is optimum to exhibit the maximum quantum efficiency,branching ratios,gain bandwidth,emission cross-section,gain crosssection and aptly suitable for visible and NIR photonic applications.     

Mechanical Properties of a Ni–Cr–Mo Steel Subjected to Room Temperature Carburizing Using Surface Mechano-Chemical Carburizing Treatment (SMCT)

Surface mechano-chemical carburizing treatment (SMCT) is a modified version of surface mechanical attrition treatment and it is one of the cutting-edge technologies for producing hard nano-crystalline surface in metallic materials. In the present study, a case carburized surface layer is achieved in 1.75 Ni–Cr–Mo steel at room temperature using SMCT. Activated charcoal powder is continuously fed during the process so as to achieve the carbon diffusion into the surface layer. The SMCT process has been carried out for different periods say 15, 30, 45 and 60 min respectively. The microstructure and surface chemical composition is investigated by using TEM and XRF analysis. The mechanical properties such as yield strength (YS), ultimate tensile strength (UTS), fracture toughness and surface hardness of SMCT samples have been investigated using universal testing machine, Plain strain fracture toughness test and Microvickers hardness test respectively. The surface carbon content has been found to increase linearly and grain size reduces continuously with processing time. A 60 min SMCT samples reveal 0.8% C and about 10 nm grains over the surface. The SMCT samples show significant improvement in mechanical properties. The surface hardness increases from 180 HV_0.1 to ~ 878 HV_0.1 by 60 min of treatment. About 55% increment in the YS and 30% increment in UTS is achieved by 60 min of SMCT. It is also interesting to note that the fracture toughness of the samples enhances from 24 to 47 MPa \( \sqrt m \) after 60 min of SMCT.     

Less common causes of carpal tunnel syndrome

A new DRB3*02 allele (DRB3*0207) was detected in a female Luxembourg Caucasian blood donor by sequence-based typing. The new allele differs from DRB3*0202 by two substitutions in codon 57 resulting in an amino acid change from a charged aspartic acid to a neutral valine. This is the first example of a DRB3 allele pair differing only at codon 57.     

Grafting vinyl monomers onto silk fibers: Graft copolymerization of methyl methacrylate onto silk using acetylacetonate Mn(III) complex

The graft copolymerization of methyl methacrylate onto Mulberry silk fibers was studied in aqueous solution using Mn(acac)₃ as initiator. Perchloric acid was found to catalyze the reaction. The rate of grafting was investigated by varying the concentration of the monomer and the complex, acidity of the medium, the solvent composition of the reaction medium, the surfactants, and the inhibitors. The graft yield increases with increasing concentration of Mn(acac)₃ up to 0.01 mol/L, decreasing thereafter. Increase of MMA concentration up to 0.56 mol/L increases graft yield, and thereafter it decreases. Among the various vinyl monomers studied, MMA was found to be most suitable for grafting. Grafting increases up to 7.5 × 10^?3 mol/L of HClO₄ concentration, and thereafter it decreases. A suitable reaction scheme has been proposed and a rate equation has been derived. The energy of activation has been calculated from the Arrhenius plot. The chain transfer constants for various chain transfer solvents have been evaluated from the average molecular weight (M?) of grafted poly(methyl methacrylate).     

Service life prediction of organic coatings: electrochemical impedance spectroscopy vs actual service life

Electrochemical impedance spectroscopy (EIS) is used to derive an expression for predicting the service life of organic coating in a C4-type environment (industrial and costal areas with moderate salinity) as defined in ISO 12944 standard for paints and varnishes—corrosion protection of steel structures by protective paint systems. Three coating systems with a record of 2, 5, and 10 years of durability were selected for the study. The selection was also based on proven composition and dry film thickness (DFT) of the coatings as per ISO 12944. Electrochemical impedance measurements of the paint-coated panels were carried out by exposing the coated mild steel panels without scribe in different corrosive environments such as immersion in NaCl solution, neutral salt spray, etc. Neutral salt spray exposure was found to be the most severe corrosive environment among all the three coating systems. In most of the cases, EIS gave early indication of coating failure when compared to visual defects such as blistering and over-film corrosion.     

The effect of electrochemical lithiation on physicochemical properties of RF-sputtered Sn thin films

Thin films of Sn were deposited on Pt/Si substrates by sputtering technique and subjected to electrochemical lithiation studies. Electrochemical lithiation of Sn resulted in the formation of Sn–Li alloys of different compositions. Charging of Sn-coated Pt/Si electrodes was terminated at different potentials and the electrodes were examined for physicochemical properties. The scanning electron microscopy and atomic force microscopy images suggested that the Sn films expanded on lithiation. Roughness of the film increased with an increase in the quantity of Li present in Sn–Li alloy. Electrochemical impedance data suggested that the kinetics of charging became sluggish with an increase in the quantity of Li in Sn–Li alloy.     

Computational Fluid Dynamics Modeling for Urea Hydrolysis in a Batch Reactor for Flue Gas Conditioning

A computational fluid dynamics (CFD) model is proposed to simulate urea hydrolysis for ammonia synthesis as a safe feed stock to flue gas conditioning in thermal power plants. A series of parametric studies to investigate flow rates, thermal boundary conditions, and reactor geometry was performed and operating conditions and reactor geometry were optimized. Detailed 3D flow, heat, and chemistry simulations of ammonia were carried out with predicted conversions comparable to measurements and the dependence of the experiments on the reaction parameters was evaluated. Through simulation under the same conditions the output was generated and compared to the experimental plot. Profiles of temperature and flow patterns were successfully achieved through simulation.