The application of coherent optics to the study of adhesive joints. I. Speckle photography

A new technique of coherent optics, speckle photography, has been applied to the study of the behavior of adhesive joints under shear stress. This technique allows the determination of the in-plane motion by a point-by-point analysis with a sensitivity of about 3 μm. This property has been used to measure the interfacial displacement of model glass-glass joints bonded by different types of adhesive when submitted to shear. The experimental results permit direct verification of Volkersen's theory as well as the determination of the actual shear modull of the thin adhesive layer. The simplicity of use and interpretation of the technique of speckle photography should lead to significant application of this method in the future for the study of adhesive joints.     

Conductance Studies of Na-Bentonite-Water Systems

Clay (Na-Wyoming bentonite) was mixed with water to form sols and gels having clay concentrations ranging from 0 to 60 gm clay per 100 gm. The specific conductances of these sols and gels were measured at several temperatures in the range 20° to 25°C. From the results, the weight conductances and apparent activation energies for conductance were calculated. Then these quantities were plotted against clay concentration. Similar plots were made using the data of other investigators. It was found that the weight conductance decreased markedly with clay concentration between 0 and about 0.5 gm of clay per 100 ml, then rose to a maximum at 10–20 gm clay per 100 ml, and fell steadily thereafter. Whereas, the apparent activation energy increased continuously over the same range of clay concentrations. These observations were explained on the basis of equations that were derived in the theoretical part of the paper.     

Assessing the predictive capability of two‐phase models for the mechanical behavior of alumina/epoxy nanocomposites

A review of analytical modeling of particulate reinforcement is made as a prelude to the problem of microstructural inhomogeneity in nanocomposite materials. Noting the inevitability of dispersion nonuniformity, and variations in agglomerate morphology and filler‐matrix interaction, the need to question the application of such models to novel materials arises. Employing the mechanical properties of alumina/epoxy nanocomposites, with known dispersion characteristics, an evaluation of the predictive capability of various models for Young's modulus, strength, and failure strain is made. Comparison between models is accompanied by a discussion of the parameters used in the fitting of macroscopic behavior to microstructural features. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 869–879, 2005     

Pathline glyphs

Visualization of pathlines is common and highly relevant for the analysis of unsteady flow. However, pathlines can intersect, leading to visual clutter and perceptual issues. This makes it intrinsically difficult to provide expressive visualizations of the entire domain by an arrangement of multiple pathlines, in contrast to well‐established streamline placement techniques. We present an approach to reduce these problems. It is inspired by glyph‐based visualization and small multiples: we partition the domain into cells, each corresponding to a downscaled version of the entire domain. Inside these cells, a single downscaled pathline is drawn. On the overview scale, our pathline glyphs lead to emergent visual patterns that provide insight into time‐dependent flow behavior. Zooming‐in allows us to analyze individual pathlines in detail and compare neighboring lines. The overall approach is complemented with a context‐preserving zoom lens and interactive pathline‐based exploration. While we primarily target the visualization of 2D flow, we also address the extension to 3D. Our evaluation includes several examples, comparison to other flow visualization techniques, and a user study with domain experts.     

Surfactants as replacements for natural lipids in bread baked from defatted wheat flour

Petroleum ether (PE) extracted 1.00% total free lipids (0.70% nonpolar and 0.30% polar) and 2-propanol (PrOH) extracted 1.36% total free and bound lipids (0.73% nonpolar and 0.63% polar) from wheat flour; the lipid fractions were characterized by thin layer chromatography. PE- or PrOH-defatted flours were baked after reconstitution with total, nonpolar, or polar wheat flour lipids; or with equivalent amounts of nonionic sucrose monopalmitate (SMP), ethoxylated monoglycerides (EMG) — each with a hydrophile-lipophile balance (HLB) of 14.0 or anionic sodium stearoyl-2-lactylate (SSL) — with an HLB value of 9.0. Defatted flours supplemented with surfactants alone or in combination with wheat flour lipids were used in bread with no-shortening and with 3%-shortening. The importance of the polar flour lipids in breadmaking was verified. The lipids in wheat flour were essential for maximizing the beneficial effects of shortening on breadmaking quality. Nonionic SMP or EMG completely replaced both PE-extractable wheat flour free total lipids ( or their non-polar or polar fractions) and 3% shortening; nonionic surfactants with high HLB were better than the anionic SSL for replacing free flour lipids. No surfactant completely replaced unfractionated PrOH-extracted lipids (free + bound) and shortening or total polar flour lipids (free + bound). All surfactants, especially anionic SSL, added with PrOH-extracted polar lipids improved the overall bread-making properties of the PrOH-defatted flour both in the absence and in the presence of shortening. Presented at the AOCS Meeting, New York, May 1977     

A study of the CCl stretching region of the Raman spectrum of PVC

The C-Cl stretching regions of the Raman spectra of a number of samples of PVC prepared by various methods which lead to differences in tacticity, conformational content and crystallinity have been studied. It is shown that the spectra of all samples can be fitted well with a set of nine Lorentzian peaks whose positions and widths are the same for each spectrum. Two of these peaks are attributable to the A_g and B_3g species vibrations of crystalline material and the remaining seven may be assigned with reasonable confidence to specific structures in the amorphous regions, three of which are associated with isotactic placements. The area under the A_g and B_3g peaks may be used to estimate the crystallinity of the samples and the area under the peaks assigned to isotactic material may be used to estimate the tacticity of the polymer.     

Effect of molecular structure on polyethylene melt rheology. III. Effects of long-chain branching and of temperature on melt elasticity in shear

The effects of long-chain branching and of temperature on the melt elasticity in shear of polyethylene were investigated using die swell measurements and relating them to recoverable shear strain, normal stress, and shear modulus. Die swell measurements, as a function of shear rate, were obtained for high- and low-density polyethylenes at temperatures ranging from 130° to 225°C. The samples were characterized by GPC and intrinsic viscosity for molecular weight distributions and degrees of long-chain branching. The importance of annealing the extrudates at temperatures above the polymer melting temperature to achieve equilibrium, or strain-free, values of die swell was demonstrated. The effect of long-chain branch was to decrease elastic deformation. At constant shear stress, the melt elasticity of both high- and low-density polyethylene was found to be essentially independent of temperature. Thus, at constant shear rate, elastic deformation decreased with increasing temperature, and it was demonstrated that this decrease could be quantitatively defined in terms of previously determined shear rate–temperature viscosity superposition shift factors.