Synthesis and characterization of cellulose nanowhisker-reinforced-poly(ε-caprolactone) scaffold for tissue-engineering applications

Poly(ε-caprolactone) (PCL) is a bioresorbable and biocompatible polymer with assorted medical applications. However, remarkable hydrophobicity and nonosteoconductivity have stood as a barrier to limit its applications. The present study aims to modify the bulk characteristics of PCL to develop a polymeric scaffold with adequate structural and mechanical properties to support regenerated tissues. For this purpose, functionalized bacterial cellulose nanowhiskers (BCNW-g-βCD-PCL₂₀₀₀) are synthesized. Reinforcing PCL matrix with 4 wt % of the nanowhiskers resulted in a bionanocomposite with promoted bulk properties. Compared to neat PCL, the obtained bionanocomposite shows improvements of 115 and 51% in tensile strength and Young's modulus, respectively; 20% increase in hydrophilicity; 7% increase in degradation rate; and 6% decrease in crystallinity. Gas foaming/combined particulate leaching technique is used to develop highly porous structures of 86–95% porosity with interconnected macropores of mean pore diameters of 250–420 μm. Porous scaffolds showed compression modulus values of 5.3–9.1 MPa and would have promising applications in regenerative medicine. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48481.     

Magnetic and Electrical Properties of Glass and Glass-Ceramics Based on Weathered Basalt

Silicon - A total of six glass batches (WB100-WB50) based primarily on weathered basalt with successive addition of bypass cement dust (with the weight content 0–50%) were melted at...     

Effects of Rheological Behavior of Viscoelastic Surfactants on Formation Damage in Carbonate Rocks

Viscoelastic surfactants (VES) are used in various oilfield applications such as matrix stimulation and enhanced oil recovery. The loss of surfactants during the propagation of VES could result in a significant reduction in the permeability of the rock (formation damage). The objective of the current work was to identify the effect of rheological behavior of the VES on the formation damage using core‐flooding experiments, nuclear magnetic resonance (NMR), and scanning electron microscopy (SEM) analysis. A combination of core‐flooding, NMR, and SEM techniques was used to quantify and identify the location of formation damage in carbonate core samples. The viscosity and storage modulus strongly depend on the nature and concentration of salts. The viscosity increased by increasing the salt concentration up to a specific point (15 wt% CaCl₂) and then starts decreasing. The VES formulations that displayed the maximum and minimum viscosities were used to identify the impact of rheological behavior on formation damage. Core‐flooding experiments were performed to assess the formation damage due to high‐viscosity and low‐viscosity VES formulations. The reduction in the permeability of carbonate rocks reaches more than 90% of the initial permeability. It was found that low‐viscosity VES caused more damage compared with high‐viscosity VES when they were used at constant concentrations. NMR and core‐flooding results revealed that the damage took place both in pore body and pore throat. However, most of the surfactant was retained at the pore throat.     

Synthesis of modified catalyst and stabilization of CuO/NH4‐ZSM‐5 for conversion of methanol to gasoline

In this article, the catalytic conversion of methanol to gasoline range hydrocarbons has been studied over CuO/ NH₄‐ZSM‐5(3,5,7,9%) catalysts prepared via sono‐chemistry methods. In order to improve, copper oxide can be used as a booster on NH₄‐ZSM‐5 this catalyst property. Accordingly, the conversion process of Methanol to Gasoline (MTG) was conducted under a pressure of 1 atm and temperature of 400°C by a fixed‐bed reactor on copper oxide catalysts which were prepared based on synthetic NH₄‐ZSM‐5. The synthetic catalyst was investigated by such analyses as BET, XRD, FT‐IR, and SEM. Formation of copper oxide phase and proper distribution of copper oxide were proven on the basic level of using XRD analysis. BET analysis showed the reduction in catalyst level and SEM images depicted the proper distribution of particles. The present investigation is to study the effect of CuO loading on NH4‐ZSM‐5 support for conversion of methanol to gasoline range hydrocarbons. A series of CuO/ NH4‐ZSM‐5 catalysts were prepared, characterized, and experimented for their performance on methanol conversion and hydrocarbon yield.     

Synthesis of tetrahydrofuran from maleic anhydride on Cu–ZnO–ZrO2/H-Y bifunctional catalysts

A series of bifunctional Cu–ZnO–ZrO₂/H-Y catalysts of different compositions were prepared by coprecipitating sedimentation method and were characterized by surface area and XRD analyses. The catalytic performance in synthesis of tetrahydrofuran was evaluated and optimized in a three-phase slurry batch reactor. The experimental results showed that the appropriate ratio of Cu/ZnO in the hydrogenation catalyst was 50/45, for which the conversion of maleic anhydride (MA) and selectivity of tetrahydrofuran (THF) reached 100% and 46%, respectively, at 50 bar and 493 K after 6 h of operation. Also, according to these results, it was demonstrated that the incorporation of zirconium oxide in the catalyst formulation enhanced the catalytic activity, and tetrahydrofuran selectivity was increased to 55%. Ultimately, it was concluded that the bifunctional catalyst of Cu–ZnO–ZrO₂/H-Y was an appropriate catalyst to produce THF from MA with high activity, selectivity and stability.     

Multiobjective optimization of biorefineries with economic and safety objectives

A new approach for the incorporation of safety criteria into the selection, location, and sizing of a biorefinery is introduced. In addition to the techno‐economic factors, risk metrics are used in the decision‐making process by considering the cumulative risk associated with key stages of the life cycle of a biorefinery that includes biomass storage and transportation, process conversion into biofuels or bioproducts, and product storage. The fixed cost of the process along with the operating costs for transportation and processing as well as the value of the product are included. An optimization formulation is developed based on a superstructure that embeds potential supply chains of interest. The optimization program establishes the tradeoffs between cost and safety issues in the form of Pareto curves. A case study on bio‐hydrogen production is solved to illustrate the merits of the proposed approach. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2427–2434, 2013     

Numerical investigation of the effects of geometric parameters of heaters on mixed covection in a lid‐driven cavity filled with different nanofluids

In this paper, the effects of the thicknesses and locations of two rectangular heaters, located on the bottom and one side of on an enclosure, on mixed convection of nanofluid flows in a lid‐driven cavity are numerically investigated. The enclosure is simultaneously heated partially by these two heaters which have similar or different thicknesses and also filled with different nanofluids containing nanoparticles of Cu, Ag, Al₂O₃, and TiO₂ within the base fluid of water. A finite volume approach by the SIMPLE algorithm is used to solve the governing equations. The effects of different Rayleigh numbers (), Reynolds numbers (), solid volume fractions (), heater lengths (), heater locations () and heater thicknesses () on the streamlines, isotherms and the average Nusselt number along two heaters are studied accurately. Also, variations of average Nusselt number of two heaters are considered whenever one heater is fixed and the other heater moves along on the wall. Moreover, variations of the length of one heater on the average Nusselt number are also studied whenever the length of the other heater is fixed. In addition, variations of the thickness of one heater on the average Nusselt number are studied whenever the thickness of the other heater is fixed.     

Synthesis and Characterization of Cationic Surfactants Based on N‐Hexamethylenetetramine as Active Microfouling Agents

Four cationic surfactants of quaternary hexammonium silane chloride based on hexamethylenetetramine and alkyl chloride were synthesized. The chemical structures of the prepared cationic surfactants were elucidated using Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. The surface and thermodynamic properties of the prepared surfactants were also studied. The performance of these cationic surfactants as microfouling agents against two strains of Gram‐negative bacteria, namely, Pseudomonas aeruginosa and Escherichia coli, and two strains of Gram‐positive bacteria, namely, Staphylococcus aureus and Bacillus subtilis, were evaluated as antimicrobial agents. The results showed that the maximum antimicrobial activity was detected for N‐hexamethylenetetramine‐N‐ethyl silane ammonium trichloride (Ah). The maximum and minimum antimicrobial activities were 73 and 60 % against S. aureus and E. coli, respectively, at a concentration of 5 mg/l, pH 7, and 37 °C.     

LAI based trees selection for mid latitude urban developments: A microclimatic study in Cairo, Egypt

To study the leaf area index, LAI, based thermal performance in distinguishing trees for Cairo's urban developments, ENVI-met plants database was used as platform for a foliage modeling parameter, the leaf area density, LAD. Two Egyptian trees; Ficus elastica, and Peltophorum pterocarpum were simulated in 2 urban sites with one having no trees, whilst the second is having Ficus nitida trees. Trees LAD values were calculated using flat leaves' trees LAI definition to produce maximum ground solid shadow at peak time. An empirical value of 1 for LAI is applied to numerically introduce LAD values for ENVI-met.Basically, different meteorological records showed improvements for pedestrian comfort and ambient microclimate of the building using F. elastica. About 40–50% interception of direct radiation, reductions in surfaces' fluxes around trees and in radiant temperature T_mrt in comparison to base cases gave preferability to F. elastica. The lack of soil water prevented evapotranspiration to take place effectively and the reduced wind speeds concluded negligible air temperature differences from both base cases except slightly appeared with the F. elastica. Results show that a flat leaves tree if does not validate LAI of 1, the ground shading would not fulfill about 50% direct radiation interception and this value can be used as a reference for urban trees selection.Further simulations were held to investigate LAI value of maximum direct radiation interception.Performing additional simulations, F. elastica of LAI of 3 intercepted almost 84% of direct radiation and revealed implications about urban trees in practice and its actual LAI.     

Predicting axial piston pump performance using neural networks

A neural network model for an axial piston pump (bent-axis design) is derived in this paper. The model uses data obtained from an experimental setup. The purpose of this ongoing study is the reduction of the power loss at high pressures. However, at the beginning, a study is being done to predict the behavior of the current design of the pump. The neural network model has a feedforward architecture and uses the Levenberg–Marquardt optimization technique in the training process. The model was able to predict the behavior of the pump accurately.