Multiple Abiotic Stresses Applied Simultaneously Elicit Distinct Responses in Two Contrasting Rice Cultivars

Rice crops are often subject to multiple abiotic stresses simultaneously in both natural and cultivated environments, resulting in yield reductions beyond those expected from single stress. We report physiological changes after a 4 day exposure to combined drought, salt and extreme temperature treatments, following a 2 day salinity pre-treatment in two rice genotypes—Nipponbare (a paddy rice) and IAC1131 (an upland landrace). Stomata closed after two days of combined stresses, causing intercellular CO2 concentrations and assimilation rates to diminish rapidly. Abscisic acid (ABA) levels increased at least five-fold but did not differ significantly between the genotypes. Tandem Mass Tag isotopic labelling quantitative proteomics revealed 6215 reproducibly identified proteins in mature leaves across the two genotypes and three time points (0, 2 and 4 days of stress). Of these, 987 were differentially expressed due to stress (cf. control plants), including 41 proteins that changed significantly in abundance in all stressed plants. Heat shock proteins, late embryogenesis abundant proteins and photosynthesis-related proteins were consistently responsive to stress in both Nipponbare and IAC1131. Remarkably, even after 2 days of stress there were almost six times fewer proteins differentially expressed in IAC1131 than Nipponbare. This contrast in the translational response to multiple stresses is consistent with the known tolerance of IAC1131 to dryland conditions.     

Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method

This article reports the effects of recycled material percentage, annealing conditions, and glass fiber percentage on the mechanical behavior of injection molded polypropylene samples. Specimens were prepared with different percentages of recycled material ranging from 0 to 100%. Two groups of samples, i.e., non‐annealed and annealed at 150°C, were tested to investigate annealing effects. The effects of adding fiber (0–7.5%) to specimens was also investigated. It was found that increasing the amount of recycled material improves the material properties in a non‐linear trend. Annealing had a significant positive effect on both non‐fiber‐added and fiber‐added samples: it improved the yield stress of non‐reinforced polypropylene samples by more than 10% and their Young's modulus by about 50%. Fiber‐added materials showed more variability, and adding fiber also improved the Young's modulus and the yield stress of the samples by about 50%. The results indicate that the three factors investigated improved toughness of the injected polypropylene samples; however the effects are not significant. The study findings reveal that using recycled polypropylene has no significant effect on the material properties of polypropylene. POLYM. ENG. SCI., 56:1283–1290, 2016 © 2016 Society of Plastics Engineers     

Synthesis and properties of new thermally stable poly(amide-imide)s containing flexible ether moieties

Six new poly(amide-imide)s (PAIs) 8a-f were synthesized from the direct polycondensation reaction of 1,1-bis[4-(trimellitimido)phenoxy]methane 6 with various aromatic diamine 7a–f. The polymerization reactions produced a series of thermally stable and organosoluble PAIs with high yield and good inherent viscosity. The resulted polymers were fully characterized by means of FTIR and ¹H-NMR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Also thermal properties of the PAIs 8a–f were investigated using thermal gravimetric analysis (TGA) and derivative of thermaogravimetric (DTG) analysis. dicarboxylic acid 6 was synthesized from the reaction of 1,1-bis[4-aminophenoxy]methane 4 with trimellitic anhydride 5 in a solution of glacial acetic acid/pyridine (Py) at refluxing temperature.     

Equilibrium,kinetic and thermodynamic study of removal of reactive orange 12 on platinum nanoparticle loaded on activated carbon as novel adsorbent

The proposed research describes the synthesis and characterization of platinum nanoparticles loaded on activated carbon (Pt-NP-AC) and its efficient application as novel adsorbent for efficient removal of reactive orange 12 (RO-12). The influences of effective parameters following the optimization of variables on removal percentages, their value was set as 0.015 g Pt-NP-AC, pH 1, contact time of 13 min. At optimum values of all variables at 25 and 50 mgL⁻¹ of RO-12 enthalpy (ΔH⁰) and entropy (ΔS⁰) changes was found to be 59.89 and 225.076, respectively, which negative value of ΔG⁰ shows a spontaneous nature, and the positive values of ΔH⁰ and ΔS⁰ indicate the endothermic nature and adsorption organized of dye molecule on the adsorbent surface. Experimental data was fitted to different kinetic models including first-order, pseudo-second-order, Elovich and intra-particle diffusion models, and it was seen that the adsorption process follows pseudo-second-order model in consideration to intra-particle diffusion mechanism. At optimum values of all variables, the adsorption process follows the second-order kinetic and Langmuir isotherm model with adsorption capacity 285.143 mg g⁻¹ at room temperature.     

Performance of a multi-slit packed bed microstructured reactor in the synthesis of methanol: Comparison with a laboratory fixed-bed reactor

The performance of a multi-slit Integrated Micro Packed Bed Reactor-Heat Exchanger (IMPBRHE) for methanol synthesis from synthesis gas over Cu/ZnO/support commercial catalyst was experimentally investigated from a reaction engineering perspective. Through establishment of a systematic comparison strategy, performance comparison with a laboratory scale tubular Fixed-Bed Reactor (FBR) with three different dilution ratios was made to evaluate the IMPBRHE. The productivity, thermal behavior, activity of body materials, pressure drop and residence time distribution (RTD) of the two reactor types were investigated. The IMPBRHE outperformed the undiluted FBR and gave CO conversions comparable to the diluted FBRs. The main difference is ascribed to superior heat exchange properties of the IMPBRHE, which can improve reactor performance for an exothermic reaction such as methanol synthesis. The results reveal advantages of the IMPBRHE for robust scale up.     

Development of a model for dimethyl ether non-adiabatic reactors to improve methanol conversion

The modeling of adiabatic and non-adiabatic reactors, using three cooling mediums in the shell side of a shell and tube reactor in cocurrent and countercurrent flow regimes has been conducted. The cooling mediums used in this research are saturated water and methanol feed gas to a reactor which is preheated in the shell side and a special type of oil. The results of adiabatic reactor modeling show good compatibility with the data received from a commercial plant. The results of non-adiabatic reactor modeling showed that more methanol conversion can be achieved in a lower length of reactor, even though in some cases the maximum temperature in the tube side of the reactor is more than the deactivation temperature of the catalyst.     

Controlled release of prednisolone acetate from molecularly imprinted hydrogel contact lenses

The aim of this work was to study the influence of methacrylic acid (MAA) as a comonomer and the application of a molecular imprinting technique on the loading and release properties of weakly crosslinked 2‐hydroxyethyl methacrylate (HEMA) hydrogels, with a view toward their use as reloadable soft contact lenses for the administration of prednisolone acetate (PA). The hydrogels were prepared with HEMA (95.90–98.30 mol %) as a backbone monomer, ethylene glycol dimethacrylate (140 mM) as a crosslinker, and MAA (0, 50, 100, or 200 mM) as a functional monomer. Different PA/MAA molar ratios (0, 1 : 8, 1 : 6, and 1 : 4) in the feed composition of the hydrogels were also applied to study the influence of the molecular imprinting technique on their binding properties. The hydrogels (0.4 mm thick) were synthesized by thermal polymerization at 60°C for 24 h in a polypropylene mold. The hydrogels were then characterized by the determination of their swelling and binding properties in water. Their loading and release properties were also studied in 0.9% NaCl and artificial lachrymal fluid. Increasing the MAA content of the hydrogel and applying the molecular imprinting technique led to an increase in the loading capacity of the hydrogel. The optimized imprinted hydrogel showed the highest affinity for PA and the greatest ability to control the release process, sustaining it for 48 h. The results obtained clearly indicate that the incorporation of MAA as a comonomer increased the PA loading capacity of hydrogel. Our data showed that the molecular imprinting technique also had a significant effect on the loading and release properties of the hydrogels. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Ni-Rhodanine Complex Supported on FSM-16 as Mesoporous Silica Support: Synthesis,Characterization and Application in Synthesis of Tri and Tetrasubstituted Imidazoles and 3,4-Dihydropyrimidine-2-(1H)-Ones

A new, efficient and recoverable heterogeneous catalyst was successfully synthesized by functionalization of mesoporous silica FSM-16. The FSM-16/CPTMS-Rh-     

PEG-PLA-PCL based electrospun yarns with curcumin control release property as suture

This work presents an interesting method using an electrospinning process to fabricate suture yarns loaded with curcumin to achieve reasonable mechanical properties as well as tunable drug release behavior. Different structures including different yarn counts and twists as well as core-sheath structures were used to adjust drug release properties along with improving the yarn's mechanical properties. The core parts were made of polycaprolactone and the sheath parts were made of polyethylene glycol, polylactic acid, and polycaprolactone. Drugs can be incorporated in both parts based on the required condition and application. Electrospun yarns were compared using both structural properties and their drug release profiles as metrics. The results of comparing drug release profiles of six electrospun yarns with different yarn counts and twists showed that yarns with finer fiber diameters in the core part have more drug release as well as more initial release. Overall evaluations showed that core-sheath drugloaded yarn with appropriate physical and mechanical properties can be a useful material as a drug delivery system to the site of damaged tissue. It can also be concluded that the amount and duration of drug release can be controlled using the structural parameters of electrospun yarns as an engineering tool for designing suture yarns with required properties.