Addressed herein, we reported the fabrication of the graphene oxide (GO) supported monodispersed ruthenium–platinum–nickel (RuPtNi) nanomaterials (3.40 ± 0.32 nm) to be utilized as a catalyst in the process of dimethylamine borane (DMAB) dehydrogenation. The nanoparticles were fabricated through the ultrasonication method by co-reducing the Ru3+, Pt2+ and Ni2+ cations and then the nanomaterials were characterized by X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), inductively coupled plasma optical emission spectrometry (ICP-OES), and X-ray photoelectron spectroscopy (XPS). The fabricated nanomaterials showed outstanding efficiency and remarkable reusability in addition to their record catalytic activity at low temperatures and with extreme low concentrations. They had a significantly high turnover frequency (TOF) (727 h?1) and low activation energy (Ea) (49.43 ± 2 kJ mol?1) for DMAB dehydrocoupling. To the best of our knowledge, RuPtNi@GO NPs become a very promising candidate as the best catalyst ever. 相似文献
A great deal of genetic variability and breeding efforts have yielded a number of specialty maize types. Little is known about how the off‐target traits in specialty maize kernel have changed and how they compare to those of standard maize genotypes. In this study, we compared the normal (NORMAL), high‐oil (HOM) and high‐protein maize (HPM) genotypes in terms of oil, protein, fatty acids and some mineral components. We also investigated the relationships among the evaluated traits in different kernel types. We detected a significant variation among the maize types for all of the investigated traits. Specialty maize genotypes had a superior performance for the traits they were specifically bred for, as well as kernel mineral content over the normal genotypes. HOM and HPM had similar values in terms of their fatty acid composition. However, they were different from the standard genotypes, with higher oleic and lower linolenic acid levels, which indicates that the specialty maize genotypes possess a better oil quality. Correlation analysis revealed that only three pairs of correlations out of 46 values had the same sign and a similar level of significance in different types. Such similarities or differences in correlation values for different types should be taken into account in the efforts for developing high quality maize genotypes. 相似文献
Adhesion of root canal filling materials to root dentin is important for the long-term success of the treatment. Push-out bond strength test is used to evaluate the adhesion capacity of root canal filling materials to root canal walls. The aim of the present study is to compare the bond strength of root canal filling materials to root dentin after irrigation with EDTA, chitosan and the combination of chitosan and PIPS irridation using push-out bond strength test. Forty-eight extracted teeth were resected until 13-mm long roots were obtained. Root canals were prepared with a size-25 OneShape instrument. Samples were divided into three groups each including 15 roots. Group 1: Canals were rinsed with 0.2% chitosan and subjected to laser irridation with PIPS at the same time. Group 2: Canals were rinsed with 0.2% chitosan. Group 3: Canals were rinsed with EDTA. All canals were filled with .06 tapered gutta-percha and AH-plus sealer. One-mm thick slices were taken from coronal, middle and apical one-thirds of the roots. Push-out bond strength was determined using a Universal Testing Machine. One root from each group was observed under SEM to evaluate the degree of smear removal. Statistical analysis was performed with Kruskall-Wallis test. Results showed that bond strength values were statistically similar in overall evaluation for all groups (p > .05). In segmental evaluation, group 1 revealed the highest bond strength in apical one-third compared to other groups (p < .05). 相似文献
Enzymes are extensively used as catalyst in several fields of production such as chemistry, and pharmaceuticals owing to their selectivity, efficiency and environmentally friendliness. However, their applications are often hindered due to their insufficient stability and difficulties in re-use. As a member of porous crystalline materials, metal organic frameworks are a promising enzyme carrier due to their multi-functional pore surfaces and robustness in variety of harsh conditions. In this study, the horseradish peroxidase (HRP) enzyme was immobilized onto UiO-66-NH2 (Universitetet i Oslo) by a facile incubation method at the room temperature to improve the stability and reusability of enzyme. The prepared HRP@UiO-66-NH2 bio-composite was characterized by using FT-IR, XRD and SEM. The crystal structure of MOF was well-preserved after enzyme immobilization. A colorimetric assay for enzyme activity after released from UiO-66-NH2 has been employed based on the catalytic oxidation of phenol coupled with 4-aminoantipyrine. The robustness and activity of immobilized enzyme after released from UiO-66-NH2 were investigated by biodegradation of methyl orange (MO) and methylene blue (MB) with several parameters such as pH, temperature, the dosage of H2O2 and the dye concentration with comparison to its free form. The optimum condition for dye degradation was obtained at basic conditions. The immobilized enzyme maintained its activity at elevated temperature while free enzyme lost its activity at the same conditions, attributed to the armoring effect of UiO-66-NH2. According to the results of studied various parameters, MO and MB were biodegraded to 60% and 45%, respectively, within 60 min with the optimum conditions at pH 9 and 50 °C at a H2O2 dosage of 3%. The superior pH tolerance and stability suggest potential of UiO-66-NH2 immobilized peroxidase enzyme in industrial applications.
Due to its rheological properties, positive lead-acid battery paste can be difficult to spread on lead current collectors accurately and efficiently under industry machinery and setting. Sodium polymethacrylate dispersant was studied as an effective positive paste additive that could lower the yield stress of the paste without affecting paste density and battery performance. Under a four-blade vane rheometer setup, stress growth and oscillatory amplitude strain sweep experiments evaluated the rheological properties of positive paste with the addition of varying amounts of sodium polymethacrylate. Further, the electrochemical effects of sodium polymethacrylate were also evaluated in 2V batteries by testing positive active material utilization and cycle life. 相似文献
Platinum electrocatalysts were prepared using PtCl4 as a starting material and 1-decylamine, N,N-dimethyldecylamine, 1-dodecylamine, N,N-dimethyldodecylamine, 1-hexadecylamine, and 1-octadecylamine as surfactants. These surfactants were used for the first time in this synthesis to determine whether the primary and/or tertiary structure and/or chain length of the surfactants, affects the size and/or activity of the catalysts in C1–C3 alcohol electro-oxidation reactions. Electrochemical measurements (cyclic voltammetry and chronoamperometry) indicated that the highest electrocatalytic performance was observed for the Pt nanocatalysts that were stabilized by N,N-dimethyldecylamine, and this has a tertiary amine structure with a short chain length (R = C10H21). The high performance may be due to the high electrochemical surface area, Pt(0)/Pt(IV) ratio, %Pt utility, and roughness factor (Rf). X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy, and transmission electron microscopy were used to determine the parameters that affect the catalytic activities. 相似文献
Universal adhesives have been recently introduced for use as self‐etch or etch‐and‐rinse adhesives depending on the dental substrate and clinical condition. However, their bonding effectiveness to laser‐irradiated enamel is still not well‐known. Thus, the aim of this study was to compare the shear bond strength (SBS) of universal adhesives (Single Bond Universal; Nova Compo‐B Plus) applied to Er,Cr:YSGG laser‐irradiated enamel with SBS of the same adhesives applied in self‐etch and acid‐etching modes, respectively. Crown segments of sixty bovine incisors were embedded into standardized acrylic blocks. Flattened enamel surfaces were prepared. Specimens were divided into six groups according to universal adhesives and application modes randomly (n = 10), as follows: Single Bond Universal/acid‐etching mode; Nova Compo‐B Plus/acid‐etching mode; Single Bond Universal/self‐etching mode; Nova Compo‐B Plus/self‐etching mode; and Single Bond Universal/Er,Cr:YSGG Laser‐etching mode; Nova Compo‐B Plus/Er,Cr:YSGG Laser‐etching mode. After surface treatments, universal adhesives were applied onto surfaces. SBS was determined after storage in water for 24 h using a universal testing machine with a crosshead speed of 0.5 mm min?1. Failure modes were evaluated using a stereomicroscope. Data was analyzed using two‐way of analyses of variances (ANOVA) (p = 0.05). Two‐way ANOVA revealed that adhesive had no effect on SBS (p = 0.88), but application mode significantly influenced SBS (p = 0.00). Acid‐etching significantly increased SBS, whereas there are no significant differences between self‐etch mode and laser‐etching for both adhesives. The bond strength of universal adhesives may depend on application mode. Acid etching may significantly increase bond strength, while laser etching may provide similar bond strength when compared to self‐etch mode. 相似文献