Do African American mothers really “love” their sons and “raise” their daughters?

This study assessed 1500 adolescents from the National Longitudinal Study of Youth to test the hypothesis that African American mothers differentially socialize their girls and boys. The results showed that later-born boys had fewer chores, argued more with their mothers, lived in less cognitively stimulating homes, and were not allowed to make the same decisions as were the girls or firstborn boys at the same age. The later-born boys were also lowest in achievement and highest in externalizing behaviors. Parenting differences accounted for the achievement differences but not for the externalizing behavior differences. It was concluded that the later-born boys would achieve at the same rates as their siblings if they were socialized in the same manner as their siblings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Affective News and Networked Publics: The Rhythms of News Storytelling on #Egypt

This study traces the rhythms of news storytelling on Twitter via the #egypt hashtag. Using computational discourse analysis, we examine news values and the form of news exhibited in #egypt from January 25 to February 25, 2011, pre‐ and post‐resignation of Hosni Mubarak. Results point to a hybridity of old and newer news values, with emphasis on the drama of instantaneity, the crowdsourcing of elites, solidarity, and ambience. The resulting stream of news combines news, opinion, and emotion to the point where discerning one from the other is difficult and doing so misses the point. We offer a theory of affective news to explain the distinctive character of content produced by networked publics in times of political crisis.     

A new texture and shape based technique for improving meningioma classification

Over the past decade, computer‐aided diagnosis is rapidly growing due to the availability of patient data, sophisticated image acquisition tools and advancement in image processing and machine learning algorithms. Meningiomas are the tumors of brain and spinal cord. They account for 20% of all the brain tumors. Meningioma subtype classification involves the classification of benign meningioma into four major subtypes: meningothelial, fibroblastic, transitional, and psammomatous. Under the microscope, the histology images of these four subtypes show a variety of textural and structural characteristics. High intraclass and low interclass variabilities in meningioma subtypes make it an extremely complex classification problem. A number of techniques have been proposed for meningioma subtype classification with varying performances on different subtypes. Most of these techniques employed wavelet packet transforms for textural features extraction and analysis of meningioma histology images. In this article, a hybrid classification technique based on texture and shape characteristics is proposed for the classification of meningioma subtypes. Meningothelial and fibroblastic subtypes are classified on the basis of nuclei shapes while grey‐level co‐occurrence matrix textural features are used to train a multilayer perceptron for the classification of transitional and psammomatous subtypes. On the whole, average classification accuracy of 92.50% is achieved through the proposed hybrid classifier; which to the best of our knowledge is the highest. Microsc. Res. Tech. 77:862–873, 2014. © 2014 Wiley Periodicals, Inc.     

Impact of ac/dc spark anodizing on the corrosion resistance of Al–Cu alloys

An ac/dc spark anodization method was used to deposit an oxide film (6 ± 3 μm in thickness) on the Al–Cu alloy AA2219. The oxide films were formed at 10 mA/cm² for 30 min in an alkaline silicate solution, showing three main stages of growth. Scanning electron microscopy and electron microprobe analysis revealed that the oxide films are not uniform and consist of three main layers, an inner Al-rich barrier layer (∼1 μm), an intermediate Al–Si mixed oxide layer (∼2 ± 1 μm), and an outer porous Si-rich layer (∼3 ± 3 μm). In addition, microscopic analysis showed that the Al₂Cu intermetallics present in the alloy have not been excessively oxidized during the anodization process and thus are retained beneath the oxide film, as desired. The coating passivity and corrosion resistance, evaluated using linear sweep voltammetry (LSV) in pH 7 borate buffer solution and electrochemical impedance spectroscopy (EIS) in 0.86 M NaCl solution, respectively, were both significantly improved after spark-anodization.     

Effect of high temperature and the role of sulfate on adsorption behavior and effectiveness of AMPS®‐based cement fluid loss polymers

The fluid loss control performance of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS®)‐based copolymers added to cement slurries was studied at 27 and 100°C, respectively. It was found that effectiveness of these fluid loss additives solely relies on achievement of a high adsorbed amount on the surface of cement. At elevated temperature (100°C), CaAMPS®‐N,N‐dimethyl acrylamide copolymer (CaAMPS®‐co‐NNDMA) exhibits reduced adsorption and hence decreased fluid loss control of the cement slurry. The reason behind this behavior is poor calcium binding capability of the sulfonate anchor groups, which coordinate with calcium atoms present on the mineral surface. Whereas, an increase in the sulfate concentration present in cement pore solution instigates partial coiling of CaAMPS®‐co‐NNDMA and causes only a slight influence on the performance of this copolymer. The elevated sulfate content results from thermal degradation of ettringite, a cement hydrate mineral produced during the early stages of cement hydration. Incorporation of minor amounts (～ 1.3 mol %) of maleic anhydride into this copolymer produces a terpolymer, which exhibits higher and more stable adsorption, even at high temperature. This effect is owed to the presence of homopolymer blocks of polycarboxylates distributed along the polymer trunk. On mineral surfaces, they present much stronger anchor groups than sulfonate functionalities, as evidenced by their higher calcium binding capability. Consequently, fluid loss performance of CaAMPS®‐co‐NNDMA‐co‐MA is little affected by temperature. Understanding the influence of temperature on the physicochemical interactions occurring between additives and the mineral surface can help to design more effective admixtures suitable for high temperature applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyelectrolyte complexes from polyethylene imine/acetone formaldehyde sulfite polycondensates: A novel reagent for effective fluid loss control of oil well cement slurries

When used by itself, polyethylene imine (PEI) does not perform well as cement fluid loss additive. Its combination with acetone formaldehyde sulfite (AFS) polycondensate, however, exhibits excellent filtration control. The mechanism underlying this synergistic effect was studied and the conditions producing best results were determined. For optimum performance, PEI and AFS must be reacted with each other to yield a polyelectrolyte complex (PEC) (d ～ 5–10 μm), which effectively plugs the pores of the cement filter cake. Composition, size, and effectiveness of the PEC are strongly influenced by the anionic charge amount of the AFS dispersant. Ionic interactions between cationic imine functionalities of PEI and anionic sulfonate groups existing in AFS were confirmed by conductivity, infrared, zeta potential, and particle size measurements. For AFS samples possessing different degrees of sulfonation, the largest particle size and hence best fluid loss performance of the PEC was found to occur at a PEI:AFS molar ratio, which corresponds to neutral charge. Occurrence of large PEC particles (d ～ 5 μm) within the cement filter cake pores was visualized by scanning electron microscopy, and their stability in highly alkaline cement pore solution was confirmed by particle size measurement. Other anionic polyelectrolytes may be used to yield such PECs with PEI to provide effective fluid loss control for cement slurries. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Intergenerational family predictors of the Black–White achievement gap.

The authors examined intergenerational family predictors of the Black–White achievement gap among 4,406 adolescents from the National Longitudinal Survey of Youth. An intergenerational model of the process by which family factors contribute to the achievement gap was also tested. The results showed that the ethnic gaps in socioeconomic status (SES) and achievement had significantly reduced over the past few generations. Moreover, measures of grandparent SES, mothers’ achievement, parent SES, and a comprehensive set of reliable parenting practices explained all of the ethnic differences in achievement scores. Parenting practices such as creating a school-oriented home environment, allowing adolescents to make decisions, and not burdening them with too many chores had particularly important effects on the achievement gap. The authors conclude that adjusting for these differences would eliminate the ethnic achievement gap. (PsycINFO Database Record (c) 2010 APA, all rights reserved)