Determination of Menbutone in Bovine Milk and Meat Using Micellar Liquid Chromatography: Application to Injectable Dosage Forms

A simple, sensitive, and rapid method was developed for the routine identification and quantification of menbutone in different matrices by micellar liquid chromatography. Separation was performed in less than 4 min using a C₁₈ column with UV detection at 234 nm. A micellar solution composed of 0.12 M sodium dodecyl sulfate, 8 % n-butanol, and 0.3 % triethylamine in 0.02 M phosphoric acid at pH 6.0 was used as the mobile phase. The method was fully validated in accordance with International Conference on Harmonization (ICH) guidelines. The limits of detection and quantitation were 0.95 and 2.86 ng mL^?1, respectively. The method showed good repeatability, linearity, and sensitivity according to the evaluation of the validation parameters. The micellar method was successfully applied for the analysis of menbutone in its commercial injections with a mean % recovery value of 99.73?±?1.634 % and in spiked bovine milk and meat samples with a mean % recovery values in the range of 98.00–100.60 %. High extraction efficiency was obtained without matrix interference in the extraction process and in the subsequent chromatographic determination. No organic solvent was used during the pretreatment step. Hence, this method can be considered as an interesting example for green chemistry.     

Optimal location planning of relay-based next generation wireless access networks

Use of relays is considered one of the most effective ways for capacity enhancement and coverage extension in next-generation broadband wireless access networks (BWAN). The paper investigates the location planning problem in BWANs, aiming at an optimal deployment of relay stations and base stations to enhance capacity. We develop formulations in mixed integer linear programming to effectively capture various planning policies that govern relay and base station placement. Case studies are conducted to verify the effectiveness of the proposed formulations. We show that the same traffic demand can be satisfied with up to 73 % fewer relay stations with a slight (6 %) decrease in the overall network capacity, compared with our benchmark. Based on the developed formulations, we introduce a maximin objective function to properly distribute excess bandwidth to all subscriber stations rather than assigning it to a single one, which surprisingly leads to a significant gain in the rate allocated to each subscriber station.     

Optical properties of sol–gel dip-coated Ta2O5 films for electrochromic applications

Amorphous Ta₂O₅ films were prepared by sol–gel dip process on different substrates. The dip-coating technique was used to prepare amorphous Ta₂O₅ films by hydrolysis and condensation of tantalum ethoxide, Ta(OC₂H₅)₅, precursor. Stable coating solutions were prepared using acetic acid as a chelating ligand and catalyzer. Single layer and multi-layered Ta₂O₅ films were fabricated at a dipping rate of 107 mm/min. The microstructure, stoichiometry and optical properties of these films were investigated as a function of the film thickness. Room temperature CV measurements clearly revealed a protonic conductor behavior for Ta₂O₅ films. Optical properties such as refractive index, extinction coefficient and optical band gap value of the Ta₂O₅ films were calculated from optical transmittance measurements. It was found that the refractive index and extinction coefficient values were affected by the thickness of the coatings. The refractive index at a wavelength of 550 nm increased from 1.70 to 1.72 with increasing film thickness. The optical band gap value (3.75±0.12 eV) of the coating was unaffected by the film thickness. These results indicate that sol–gel-deposited Ta₂O₅ films have a promising application as proton conductors in electrochromic devices.     

Sensors fault diagnosis and fault tolerant control for grid connected PV system

This paper discusses a Sensors Fault Detection and Isolation (FDI) and Fault Tolerant Control (FTC) of three phase inverter for PV system application. All sensors used in the inverter control strategy are addressed in this work. The developed FDI algorithm focuses on residuals generation; it is defined by the different between measurement and reconstituted signal. So, estimators block are investigated, such as, two Models References Adaptive Systems (MRAS) are developed to reconstitute the information of three phase line currents and dc link voltage sensors. The reconstituted information is injected to the corresponding FDI algorithm. Grid voltage sensors FDI is presented in this contribution trough the use of scaled virtual flux estimator, based on Second Order Generalized Integrator and Frequency Looked Loop. When a fault detected, FTC is ensured by replacing the erroneous measurement by its corresponding estimator. Theoretical study and simulations results are presented to validate the effectiveness of the proposed method.     

Effect of Germination on the Functional and Moisture Sorption Properties of High–Pressure-Processed Foxtail Millet Grain Flour

Foxtail millet is one of the commonly cultivated, nutritionally competitive source of protein, fibre, phytochemicals and other micronutrients, as compared to major cereals like wheat and rice. Considering the potential of these grains, the high pressure processed flours of germinated (GFMF) and non-germinated foxtail millet (NGFMF) grains were studied for its functional, moisture sorption and thermodynamic properties. Germination and high-pressure processing of foxtail millet grains significantly improved the functional properties of the flour. Apart from this, the moisture sorption isotherms of both the flours were determined at 10, 25 and 40 °C and the sorption data was fitted to Guggenheim-Anderson-De Boer (GAB) sorption model. The monolayer moisture content for NGFMF and GFMF ranged between 3.235–2.364 and 2.987–2.063 g g^?1, respectively. The isosteric heat of sorption ranged between ? 76.35 to ? 38.23 kJ mol^?1 for NGFMF and 172.55 to ? 34.02 kJ mol^?1 for GFMF at a moisture range of 0 to 36%, whereas, the integral entropy of sorption for NGFMF ranged between ? 0.404 and ? 0.120 kJ mol^?1 K^?1 and for GFMF between ? 0.667 and ? 0.383 kJ mol^?1 K^?1. Along with the validation of the compensation theory, the values of spreading pressures lied in the range of 0–0.078 J m^?2 for NGFMF and 0– 0.124 J m^?2 for GFMF, while, the glass transition temperatures ranged between 82.25 and 28.67 °C for NGFMF and from 51.11 to 11.83 °C for GFMF at all three temperatures.     

Enhancement of Bioactive Compounds and Antioxidant Activities of Olive (<Emphasis Type="Italic">Olea europaea</Emphasis> L.) Leaf Extract by Instant Controlled Pressure Drop

In this work, the effect of Détente Instantanée Contrôlée (DIC) (French for instant controlled pressure drop) on the total polyphenol, flavonoids, α-tocopherol contents, and antioxidant activities of olive leaves was studied. Olive leaf extracts were pre-treated at one cycle DIC under 0.1 MPa pressure for 11 s and followed by an extraction with 95% ethanol at 55 °C during 3 h. The phenolic compounds, flavonoïds, oleuropein, and α-tocopherol contents were determined, showing 66.63 mg gallic acid equivalent (GAE)/g db, 12 mg catechin equivalent (CE)/g db, 43.9 mg/g db, and 0.15 mg/g db for the untreated leaves against 239.37 mg GAE/g db, 28 mg CE/g db, 70.3 mg/g db, and 0.59 mg/g db for DIC-treated leaves, respectively. Therefore, DIC allows more availability of bioactive compounds contributing to a high antiradical activity (DPPH) compared to a synthetic antioxidant butylated hydroxytoluene (BHT). Both extracts showed a total antioxidant capacity (method of phosphomolybdenum) greater than that of the standard BHT. Likewise, both extracts have a reducing power (FRAP test) significant concentration-dependent. The DIC-treated leaves showed a higher antioxidant capacity compared to that of untreated leaves. Thus, DIC could be an effective treatment to promote the extraction of bioactive molecules of high antioxidant activities from olive leaves.     

Characterization and correlation of crude oils from some wells in the North Western Desert,Egypt

Characterization and correlation of crude oils from some wells in the North Western Desert, based on six crude oil samples, were studied by different analytical techniques, including API gravity, sulfur content, nickel and vanadium, bulk compositions and saturated fraction obtained from gas chromatography have been studied. The results show that the crude oils are normal to medium aromatic oils, with high API gravity and high sulfur content. V, Ni, V/Ni and V/(V + Ni) reflecting oils might be sourced from non-clastic source rocks, possibly carbonates, deposited under anoxic-suboxic conditions. Bulk compositions revealing that the crude oils were derived from marine organic sources. While, the paraffins and naphthenes percent indicates that the oils belong to paraffinic to naphthenic oil types, deposited in slightly anoxic to suboxic conditions and contained marine organic matter. Thermal maturity data showed that the oil samples were generated from mature source rocks. This indicates the studied oil samples are well correlated with each other, where they are similar in their oil type maturation and source depositional environments.     

Inter-plant hydrogen integration with regeneration placement and multi-period consideration

Inter-plant hydrogen integration (IPHI) is getting more attention in recent years, as a result of the increasing demand for hydrogen in refinery processes, such as hydrotreating and hydrocracking. In this work, IPHI with regeneration scheme is analyzed. Indirect integration scheme is adopted, where hydrogen sources from different hydrogen networks are integrated via a centralized purifier, such as pressure swing adsorption (PSA) or membrane separation. The introduced model is able to select the optimum interception unit, which minimizes the total annualized cost. Besides, multi-period consideration is included in the analysis to address the effect of changes in operating conditions of the IPHI network on total hydrogen consumption. Two case studies are presented to demonstrate the applicability and usefulness of the proposed model.     

Oil: Source rock correlations of Al Baraka oil field,Komombo basin,South Egypt: An implication from biomarkers characteristics

The objectives of this study are the correlation between the oil samples recovered from the Lower Cretaceous reservoirs and Lower and Upper Cretaceous source rocks. The investigated biomarkers of five oils indicated the oils were derived from mixed marine and terrigenous (lacustrine) organic matter and deposited under suboxic to anoxic conditions. These oils were also generated from source rocks of high thermal maturity at the peak oil window. So, based on the molecular indicators of organic source input,depositional environment and maturity parameters of oils and extracts, we can conclude that the oil recovered from Al Baraka oil field were derived from Lower Cretaceous source rocks especially KomOmbo (B) source rocks where it reached the oil window. Furthermore, we can indicate that the other lower Cretaceous formations as Abu Ballas Formation will have the opportunity to generate and expel oil at the deeper part of the basin as shown in the eastern part of the basin.     

Design and in vitro evaluation of polymeric formulae of simvastatin for local bone induction

Simvastatin (SVS), a cholesterol-lowering drug, has been shown to stimulate bone formation. This study deals with the design and in vitro evaluation of local delivery systems for simvastatin. They are intended to treat bony defects resulting from periodontitis or to induce osteogenesis around the titanium implants. Granules and gels were formulated using bioerodible/biocompatible polymers, namely hydroxypropylmethyl cellulose (H), sodium carboxymethyl cellulose (C), and chitosan (Ch). The in vitro release profiles and kinetics were evaluated and the swelling and/or erosion was monitored. Differential scanning calorimetry (DSC) and infrared (IR) were used to detect any SVS/polymer interactions that may affect drug release. The results revealed variable extents of controlled drug release from the designed formulae depending on the polymer nature. About 50% cumulative SVS was released from both H granules and gel formulae within 24 h and ∼66% and ∼88% from C granules and gel, respectively. Ch formulae exhibited ∼50% release from granules and ∼30% from gel.