Improvement of Microwave Loss Tangent and Tunability of Ba0.55Sr0.45TiO3/MgO Composites Using the Heterogeneous Precipitation Method

Ba_0.55Sr_0.45TiO₃/MgO composites were successfully prepared by the heterogeneous precipitation method and their structural, surface morphological, tunable properties, and dielectric properties at microwave frequency were systemically investigated. Compared with the sample prepared by the traditional solid-state method, the sample prepared by the heterogeneous precipitation method exhibits a smaller grain size, more uniform microstructure, higher tunability, and lower microwave loss, and these properties are very beneficial to the development of the microwave tunable devices application. Moreover, the effects of La₂O₃ doping on the dielectric and tunable properties of BST/MgO composites are investigated. The result shows that the La³⁺-doped sample has higher tunability and lower microwave loss than the undoped one.     

水下拖曳体多源信息监控系统设计与实现

基于海洋电法探测系统中水下拖曳体对多源信息实时监控的需求,设计了一种准实时监测拖曳体的运动状态与环境信息的监控系统。该系统可与水面监控器保持命令与数据沟通,并在监控器的指令下启动水下电法仪执行参数设置、数据采集等操作。经系统样机的海上测试结果表明,系统性能稳定可靠,能够在其他水下信息采集作业中得到推广应用。     

一种适用于降压DC-DC的改进型电流检测电路

基于电流模式控制能够较好地改善DC-DC的性能,设计一种适用于降压DC-DC的改进型电流检测电路,所提出的电流检测电路提高了电流感应的速度和精度。通过对电路的理论分析与设计,采用SMIC 0.18μm CMOS工艺模型,利用Cadence工具对电路进行仿真验证,所提出的电流检测电路在负载电流为50 mA~500 mA时都能够达到96%的效率以及小于40 ns的建立时间。在开关频率为2 MHz时,输入电压范围为2.5 V~4.2 V,所需电感值为4.7μH,电容值为10μF,输出电压纹波小于18 mV。     

Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction

Concretes containing different types of hybrid fibers at the same volume fraction (0.5%) were compared in terms of compressive, splitting tensile, and flexural properties. Three types of hybrid composites were constructed using fiber combinations of polypropylene (PP) and carbon, carbon and steel, and steel and PP fibers. Test results showed that the fibers, when used in a hybrid form, could result in superior composite performance compared to their individual fiber-reinforced concretes. Among the three types of hybrids, the carbon-steel combination gave concrete of the highest strength and flexural toughness because of the similar modulus and the synergistic interaction between the two reinforcing fibers.     

基于浏览器 /服务器的橡胶加工网络测控系统

通过对客户机／服务器模式和浏览器／服务器模式的比较，选择浏览器／服务器模式组建了基于Internt/Intranet的远程橡胶加工网络测控系统，并介绍了系统的开发模式、方法和注意事项。     

PVC树脂中杂质粒子的来源及消除方法

系统地分析了PVC树脂中杂质粒子的来源和产生原因，提出了解决的方法。杂质粒子与所用原材料、设备、工艺、聚合配方组分及氯乙烯单体中的铁化合物有关。在配方中全用聚乙烯醇做悬浮剂时由于反应前后浓度变化大而容易产生自聚物和粘釜物而增加杂质粒子，加入少量纤雏素可稳定悬浮剂浓度。单体含酸含水所产生的铁锈与氯化铁形成有色胶状物是杂质粒子的重要来源，采用在合成工段滴加碱溶液的方法消除酸和氯化铁，避免胶状物的产生。     

催化精馏合成异丙苯过程催化剂装填结构研究

为考察不同催化剂装填结构对催化精馏合成异丙苯过程的影响 ,在热态反应器中进行苯烃化催化精馏合成异丙苯的研究。反应器直径为 3 0mm ,高 2 0 0 0mm ,所用催化剂为 β改性沸石分子筛。操作压力0 .7MPa ,温度 43 0— 480K ,苯质量空速 4— 6h- 1 ,苯烯摩尔比 1.1— 2 .2 ,回流比 9— 2 0。催化剂装填结构由不锈钢填料与催化剂颗粒组成 ,三种装填结构的空隙率分别为 85 .1% ,81.6%和 79.4%。结果表明 ,对于异丙苯合成体系 ,装填结构对催化精馏的总体效果起决定性影响。在催化剂装填总量不变的前提下 ,异丙苯的选择性与丙烯的转化率均随催化剂装填结构空隙率的提高而提高。在优化条件下 ,异丙苯的选择性达97% ,丙烯转化率接近 10 0 %。催化剂装填结构对异丙苯选择性的影响比对丙烯转化率的影响更显著     

细胞激动素Kinetin合成的改进

介绍了用糠胺与腺嘌呤在催化条件下反应合成细胞激动素kinetin,该法原料易得,反应条件温和,产品收率及纯度都较高。     

Discourse cues to deception in the case of multiple receivers

Behavioral cues to deception are instrumental in detecting deception. As one of the primary sources of deception behavior, text has been analyzed at the level of sub-sentence or message but not the discourse of interaction. Additionally, empirical studies on cues to deception in the case of multiple receivers remain nonexistent. To fill these voids, we propose a discourse framework and six hypotheses about deception behaviors in a multi-receiver environment. The deception behaviors are operationalized by discourse features based on an analysis of real-world data. The results of statistical analysis validate the efficacy of discourse features in discriminating deceivers from truth-tellers.     

A minimal kinematic model for serial robot calibration using POE formula

Traditional methods based on the product of exponentials (POE) formula are parametrically continuous and complete for the calibration of the kinematic parameters of serial robots. However, these methods are not minimal due to the constraints of joint twists. This paper puts forward a new POE-based model, whose parameters are totally independent and conform to the formula of minimality. This is the first model that simultaneously satisfies the requirements of parametric continuity, completeness, and minimality with uniform and generic modeling rules. The proposed approach avoids the operations of normalization and orthogonalization which are necessary redundancy elimination steps with the traditional model. Simulations on a SCARA robot and experiments on an ABB IRB 120 robot prove that the new model outperforms in convergence, accuracy, and efficiency.