Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Comparison between the binding of chlorpheniramine maleate to poly(sodium 4-styrenesulfonate) and the binding to other polyelectrolytes

The interactions of the antihistaminic drug chlorpheniramine maleate (CPM) with the negatively charged polyelectrolytes poly(sodium 4-styrenesulfonate) (PSS) and poly(acrylic acid) (PAA) are studied by the washing method of the diafiltration technique at conditions simulating those of the small intestine such as pH 7.5 and 0.13 M NaCl. The results are compared with those already reported involving other pharmacologically important polyelectrolytes such as alginic acid (ALG), carboxymethylcellulose (CMC), and κ- and ι-carrageenan (κ- and ι-CAR). As in the case of ALG, CMC, and CAR, interactions of CPM with PAA appear to be electrostatic and are cleaved in the presence of 0.13 M NaCl. On the contrary, apart from electrostatic interactions, additional interactions are found with PSS and residual interactions are kept in the presence of 0.13 M NaCl, a fact that may be attributed to π-π interactions and hydrophobic forces. The effect of the addition of 4 M urea, branched poly(ethyleneimine) (BPEI), and poly(vinylpyrrolidone) (PVP) is also studied. The addition of urea 4 M or 0.001 M BPEI produces a decrease on the amounts of counterions bound to PSS at infinite elution, while the addition of PVP does not produce any change on the diafiltration profiles.     

64-Mb/s data transmission beyond the relaxation oscillation frequency using monolithically integrated two laterally coupled diode lasers

In this letter, we demonstrate the possibility of using two monolithically integrated laterally coupled diode lasers for data transmission beyond the intrinsic relaxation oscillation frequency of semiconductor lasers. The resonance of the lateral modes of such structure provides a peak in the small signal modulation response of the device above the relaxation oscillation frequency of the intrinsic emitters that is studied in terms of relative intensity noise and phase noise to characterize this new, simple, and compact device. Optical transmission of a 64-Mb/s pseudorandom bit sequence signal using a microwave carrier over this resonance peak of the lateral modes above the relaxation oscillation is demonstrated for the first time to our knowledge.     

Solution structure of a DNA duplex containing the exocyclic lesion 3,N4-etheno-2'-deoxycytidine opposite 2'-deoxyguanosine

Vinyl chloride reacts with cellular DNA producing 3,N4-etheno-2'-deoxycytidine (epsilonC) along with other exocyclic adducts. The solution structure of an oligodeoxynucleotide duplex containing an epsilonC.dG base pair was determined by high-resolution NMR spectroscopy and molecular dynamics simulations. NMR data indicated that the duplex adopts a right-handed helical structure having all residues in anti orientation around the glycosylic torsion angle. The epsilonC adduct has a sugar pucker in the C3'-endo/C4'-exo region while the rest of the residues are in the C2'-endo/C3'-exo range. NOE interactions established Watson-Crick alignments for canonical base pairs of the duplex. The imino proton of the lesion-containing base pair resonated as a sharp signal that was resistant to water exchange, suggesting hydrogen bonding. Restrained molecular dynamics simulations generated three-dimensional models in excellent agreement with the spectroscopic data. The refined structures are slightly bent at the lesion site without major perturbations of the sugar-phosphate backbone. The adduct is displaced and shifted toward the major groove of the helix while its partner on the complementary strand remains stacked. The epsilonC(anti).dG(anti) base pair alignment is sheared and stabilized by the formation of hydrogen bonds. The biological implications of structures of epsilonC-containing DNA duplexes are discussed.     

Genetic mapping of a major susceptibility locus for juvenile myoclonic epilepsy on chromosome 15q

The epilepsies are a group of disorders characterised by recurrent seizures caused by episodes of abnormal neuronal hyperexcitability involving the brain. Up to 60 million people are affected worldwide and genetic factors may contribute to the aetiology in up to 40% of patients. The most common human genetic epilepsies display a complex pattern of inheritance. These are categorised as idiopathic in the absence of detectable structural or metabolic abnormalities. Juvenile myoclonic epilepsy (JME) is a distinctive and common variety of familial idiopathic generalised epilepsy (IGE) with a prevalence of 0.5-1.0 per 1000 and a ratio of sibling risk to population prevalence (lambda(s)) of 42. The molecular genetic basis of these familial idiopathic epilepsies is entirely unknown, but a mutation in the gene CHRNA4, encoding the alpha4 subunit of the neuronal nicotinic acetylcholine receptor (nAChR), was recently identified in a rare Mendelian variety of idiopathic epilepsy. Chromosomal regions harbouring genes for nAChR subunits were therefore tested for linkage to the JME trait in 34 pedigrees. Significant evidence for linkage with heterogeneity was found to polymorphic loci encompassing the region in which the gene encoding the alpha7 subunit of nAChR (CHRNA7) maps on chromosome 15q14 (HLOD = 4.4 at alpha = 0.65; Z(all) = 2.94, P = 0.0005). This major locus contributes to genetic susceptibility to JME in a majority of the families studied.     

Use of the polymerase chain reaction in the diagnosis of leprosy

A case is described in which a pericardial branch of a nongrafted left internal mammary artery communicated directly with the distal left anterior descending artery, following saphenous vein bypass grafting. This type of collateralization following coronary artery bypass surgery seems to be very rare, and perhaps could protect the myocardium from severe ischemia.     

Using Multimedia to Support Cooperative Editing

By Cooperative Editing we mean the coordinated manipulation of information by a group of authors. During the editing process the (co-)authors need to communicate their ideas, drafts and constraints (remotely or face-to-face) until a final version of the information is achieved. For the different phases of this process - discussion of ideas, editing, cross-checking - different media or media integration are adequate. Furthermore, analysing the transition from individual work to group work, within different human activities, two pitfalls are often detected if computer support is considered: a) technological communication difficulties, especially if the group is remotely located on heterogeneous hardware, associated with a fall in productivity and frequent social inadequacies of the group's computer support; b) the lack of integrated media processing tools available for group editing. In order to solve these problems, we suggest that Multimedia can be applied in two ways: to effectively support the necessary group communication links; and to enhance the expressiveness of the information edited. To test this statement we have been conceptualising and implementing a prototype system. Most of the techniques involved can be used in other tools that need multimedia capabilities or that support other specific types of group activities. The innovative aspects of the work are the use of multimedia techniques to support demanding applications, possibly on cross-platforms, and the integration of several concepts to support cooperation.     

Cooperative Hypermedia Editing with CoMEdiA

CoMEdiA is a groupware tool which enables co-authors to cooperatively produce hypermedia documents.CoMEdiA allows co-authors to communicate their ideas,drafts,guidelines,constraints and annotations to other co-authors.In uses a mix of communication patterns,media and document organization to enable co-authors to keep on exchanging information(remotely or face-to-face),improving passages and modifying notes until a final document is achieved.We did not concentrate on th depth but on the breath of the features.Our efforts were on integrating and corrdinating concepts from collaboration,multimedia and hyper organization rather than on making a specialized system in any of them.We began with the text medium and are now including bitmaps and raster images.Later sound and video will also be integrated.In this paper we describe and sustain the available capacites.