Glass-fibre-reinforced composites with enhanced mechanical and electrical properties - Benefits and limitations of a nanoparticle modified matrix

Nanoparticles and especially carbon nanotubes (CNTs) provide a high potential for the modification of polymers. They are very effective fillers regarding mechanical properties, especially toughness. Furthermore, they allow the implication of functional properties, which are connected to their electrical conductivity, into polymeric matrices. In the present paper, different nanoparticles, as fumed silica and carbon black, were used to optimise the epoxy matrix system of a glass-fibre-reinforced composite. Their nanometre-size enables their application as particle-reinforcement in FRPs produced by the resin-transfer-moulding method (RTM), without being filtered by the glass-fibre bundles. Additionally, an electrical field was applied during curing, in order to enhance orientation of the nanofillers in z-direction. The interlaminar shear strengths of the nanoparticle modified composites were significantly improved (+16%) by adding only 0.3 wt.% of CNTs. The interlaminar toughness G_Ic and G_IIc was not affected in a comparable manner. The laminates containing carbon nanotubes exhibited a relatively high electrical conductivity at very low filler contents, which allows the implication of functional properties, such as stress-strain monitoring and damage detection.     

Adaptive control of linear time-varying systems

Single-input single-output uncertain linear time-varying systems are considered, which are affected by unknown bounded additive disturbances; the uncertain time-varying parameters are required to be smooth and bounded but are neither required to be sufficiently slow nor to have known bounds. The output, which is the only measured variable, is required to track a given smooth bounded reference trajectory. The undisturbed system is assumed to be minimum-phase and to have known and constant relative degree, known sign of the ‘high frequency gain’, known upper bound on the system order. An adaptive output feedback control algorithm is designed which assures: (i) boundedness of all closed-loop signals; (ii) arbitrarily improved transient performance of the tracking error; (iii) asymptotically vanishing tracking error when parameter time derivatives are L₁ signals and disturbances are L₂ signals.     

Photorefractive gratings in DR1-doped hybrid sol–gel films

Photorefractive gratings have been obtained with 632.8 nm writing beams in organic–inorganic SiO₂-based films. The hybrid glass is prepared by a sol–gel technique, starting from organic Si precursors, and contains Disperse Red 1 (DR1), carbazole units and 2,4,7-trinitro-9-fluorenone (TNF). The photorefractive gain, which has been found unexpectedly even without poling field, has been determined through an asymmetric energy exchange by two-beam coupling measurements. The effects of the polarization of the writing beams and of a circularly polarized photoisomerizing radiation during the erasure of the grating have been interpreted in terms of an orientational contribution to the grating formation.     

Evaluation of thermal and mechanical properties of rubber compositions based on SBR extended with safe oils

The extender oil usually employed in compositions of rubbers based on styrene and butadiene (SBR) 1712 is the distilled aromatic extract (DAE). In this work, this oil was substituted by oils with low levels of polycyclic aromatic hydrocarbons (PAHs): treated residual aromatic extract (TRAE) and two naphthenic oils from different suppliers (HN1 and HN2). This substitution was performed in response to REACH Regulation (EC No. 1907/2006 European Parliament and the Council of December 18, 2006, Annex XVII), which state that the sum of individual PAHs should be below 10 mg/kg and the levels of benzo (a) pyrene (BaP) should not exceed 1 mg/kg. Infrared spectroscopy was employed to characterize the structure of crude oils and respective SBR compositions. Thermal properties of the materials were evaluated by thermogravimetry and differential scanning calorimetry. Mechanical properties as tension tests, hardness, abrasion resistance, and resilience were also determined. The final results showed that it is possible to replace the extender oil DAE for any of the oils tested, specially the naphthenic HN1, without any loss of the properties evaluated in this study for the SBR compositions. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Discovering collaborative knowledge-intensive processes through e-mail mining

Knowledge Management aims to promote the growth, communication and preservation of knowledge within an organization, which includes managing the appropriate resources to facilitate knowledge sharing and reuse. Business Process-Oriented Knowledge Management focuses on discovering and representing the dynamic conversion of existing knowledge among participants involved in executing business processes. In this context, Knowledge-Intensive Processes are a very important and challenging specific subclass of processes, since they strongly involve socialization and informal exchanges of knowledge among participants. This paper describes in detail a method for semi-automatic discovery of relevant information characterizing Knowledge-Intensive Processes, as well as the results of further evaluation of the method. Our approach draws on the informal exchange of existing knowledge in collaborative tools such as e-mails. The output is a conceptual map that describes the main elements of a Knowledge-Intensive Process, as well as their relationships. The results from the case study conducted to evaluate the method in an organization underlined the prospects for using collaborative environments to discover the way agents perform their activities.     

Stress Distributions Around Rigid Nanoparticles

A closed form solution for the stress fields around a rigid nanoparticle under uniaxial tensile load is provided. The work explicitly accounts for the presence, around the nanoparticle, of an interphase of thickness comparable to the particle size and different elastic properties from those of the matrix. The solution allows one to determine, in closed form, the stress concentration around nanoparticles relevant for fracture and strength assessments of polymer nanocomposites.     

The effect of ultrasonic irradiation on the crystallinity of nano-hydroxyapatite produced via the wet chemical method

Nanohydroxyapatite (nHAp) powders were produced via aqueous precipitation by adopting four different experimental conditions, assisted or non-assisted by ultrasound irradiation (UI). The nHAp powders were characterized by X-ray diffraction, energy-dispersive X-ray fluorescence, Raman and attenuated total reflection Fourier transform infrared spectroscopies, which showed typical surface chemical compositions of nHAp. Analysis found strong connections between UI and the crystallization process, crystal growth properties, as well as correlations between calcination and substitution reactions.     

Water soluble trehalose-derived oligoamides

A new family of oligotrehaluronamides was synthesized through the polycondensation of α,α-trehaluronic acid dimethyl ester and different diamines or polyamines. In particular, diamines with different molecular structure (1,n-alkylene diamines, aromatic diamine, and alkyleneoxydiamine) were used in order to modulate the molecular weights and the physical characteristics of the products, such as T_g, hydrophilic or hydrophobic properties, and solubility. α,α-Trehaluronic acid was obtained from a renewable source as α,α-trehalose. The syntheses of oligotrehaluronamides were carried out in different solvents such as ethanol, methanol, THF and DMSO, using triethylamine as catalyst. All the compounds obtained in this study were characterized through FT-IR and NMR spectroscopy. The molecular weights were evaluated by ¹H-NMR and in some cases compared with those obtained from ESI-MS spectrometry. Glass transition temperatures and melting points were detected by differential scanning calorimetry. Low molecular weight oligoamides, containing several hydroxyl groups, are water-soluble and could be used in water-based formulations.     

Characterization of Salmonella Enteritidis isolated from human samples

This study aimed to characterize Salmonella Enteritidis (SE) isolated from blood (n = 12) and feces (n = 68) of salmonellosis victims in Southern Brazil. All isolates were submitted to antimicrobial susceptibility testing, PCR-ribotyping, and XbaI macrorestriction Pulsed-Field Gel Eletrophoresis (PFGE). Results demonstrated high levels of ampicillin and nalidixic acid resistance, and strains isolated in different geographic regions were clustered together, presenting a common resistance profile. All strains demonstrated similar and related PCR-ribotyping patterns (R1, R2, and R3); being that the predominant profile R1 grouped 47.5% of the strains. PFGE profile P1 grouped the majority of the strains (96.25%), suggesting a clonal relationship among the strains or inability of molecular typing methods to discriminate strains of this serovar. Results suggested on an increase in antimicrobial resistance and that strains of S. Enteritidis with similar PFGE and PCR-ribotyping profiles were involved in several salmonellosis outbreaks in Southern Brazil.