Residues of different gel formulations on dentinal walls: A SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypochlorite gel, chlorhexidine gel, and EDTA gel on dentinal walls after canal preparation through chemical SEM‐ elemental chemical microanalysis (EDS) analysis. Forty‐eight single‐rooted teeth were selected. They had their crowns sectioned and were instrumented with a reciprocating system. The canals were irrigated with 5 mL of saline solution during root canal preparation. After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min of ultrasonic passive activation (3× 20 sec) to remove the smear layer, and then irrigated with 3 mL of saline solution. The specimens were randomized into three groups (n = 12) according to the chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel; GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative control group: no substance was used. Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonic passive activation (3× 20 sec). After ultrasonic activation, the canals were irrigated with 2 mL saline. The roots were sectioned, and the percentage of each chemical element present in the samples was analyzed through chemical SEM‐EDS microanalysis. All experimental groups showed a significantly higher percentage of chemical elements (Na and/or Cl) than the control group (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used even after the final irrigation protocol, chemical residues of different substances remained attached to the root canal walls. Microsc. Res. Tech. 78:495–499, 2015. © 2015 Wiley Periodicals, Inc.     

Comparing different methods to fix and to dehydrate cells on alginate hydrogel scaffolds using scanning electron microscopy

Scanning electron microscopy (SEM) is commonly used in the analysis of scaffolds morphology, as well as cell attachment, morphology and spreading on to the scaffolds. However, so far a specific methodology to prepare the alginate hydrogel (AH) scaffolds for SEM analysis has not been evaluated. This study compared different methods to fix/dehydrate cells in AH scaffolds for SEM analysis. AH scaffolds were prepared and seeded with NIH/3T3 cell line; fixed with glutaraldehyde, osmium tetroxide, or the freeze drying method and analyzed by SEM. Results demonstrated that the freeze dried method interferes less with cell morphology and density, and preserves the scaffolds structure. The fixation with glutaraldehyde did not affect cells morphology and density; however, the scaffolds morphology was affected in some level. The fixation with osmium tetroxide interfered in the natural structure of cells and scaffold. In conclusion the freeze drying and glutaraldehyde are suitable methods for cell fixation in AH scaffold for SEM, although scaffolds structure seems to be affected by glutaraldehyde. Microsc. Res. Tech. 78:553–561, 2015. © 2015 Wiley Periodicals, Inc.     

Morphology of sealant/enamel interface after surface treatment with bioactive glass

The purpose of this study was to analyze, by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM), the morphology of sealant/enamel interface after surface treatment with Biosilicate. Before pits and fissures sealing, the occlusal surfaces of 10 sound human molars were sectioned perpendicularly at the fissures in order to obtain three slices for each tooth. Slices were randomly assigned into three groups (n = 10) according to sealing protocol: Group 1‐ Acid etching + Biosilicate + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 2‐ Acid etching + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 3‐ No sealing. All slices were subjected to thermal cycling (5,000 cycles; 5–55°C; dwell time: 30s). Half of the slices from each group (n = 5) were analyzed by CLSM and the other half by SEM. Groups 1 and 2 were also submitted to EDS analysis and their data were evaluated by Two‐Way ANOVA e Tukey's test (α=5%). EDS data analysis showed higher amounts of silicon (Si) ions than calcium (Ca) ions in Group 1 (P < 0.05); Group 2 presented higher amounts (P < 0.05) of Ca ions than Si ions. It may be concluded that the use of Biosilicate for surface treatment did not affect the morphology of glass ionomer‐based sealant/enamel interfaces. Microsc. Res. Tech. 78:1062–1068, 2015. © 2015 Wiley Periodicals, Inc.     

Phase-space volume based control of semibatch reactors

We present and apply a control methodology using the divergence of the system as a goal function to control semibatch chemical reactors and show how the process operation may be optimized by only measuring the reactor and jacket temperatures. The implementation of the approach is also demonstrated using phase-space reconstruction techniques. This new control methodology offers a complementary approach to more traditional techniques and it can be easily extended to other industrial installations and processes.     

New Blended Cement from Polishing and Glazing Ceramic Sludge

Waste generated in ceramic tiles manufacturing is not usually recycled inside the productive plant, but rather disposed to landfill. This paper deals with ceramic residues from polishing and glazing processes, as constituents for innovative blended cements. New binders made up of 75% CEM I 52.5 R and 25% residues were chemically, physically, and mechanically characterized with reference to EN 197-1 requirements and the results compared with ordinary Portland cement. Mechanical strength development and microstructure of the relevant mortar have been investigated up to 90 days of curing, and the behavior of polishing and glazing residues as cement constituents is reported.     

Single-step bifunctional coating for selectively conjugable nanoparticles

A single-step method to coat and bifunctionalize water-reduced gold nanoparticles (NPs) with two distinct reactive groups is reported. The coating is based on a peptide that bonds to the NPs surface by its N-cysteine amino acid, terminates with a C-terminal lysine, and stabilizes the colloids, thanks to the surface organization provided by the rest of the non-polar chain. The process yields stable, non-cytotoxic NPs presenting reactive amine and carboxylic groups on the surface; these allow rapid, selective and modular conjugation of virtually any chosen biomolecule or fluorophore. Functionalized and conjugated nanostructures are analyzed by electrophoresis, SEM, SERS; their biocompatibility and delivery capability are tested by cellular-uptake experiments.     

Functionalized gold nanoparticles: a detailed in vivo multimodal microscopic brain distribution study

In the present study, the in vivo distribution of polyelectrolyte multilayer coated gold nanoparticles is shown, starting from the living animal down to cellular level. The coating was designed with functional moieties to serve as a potential nano drug for prion disease. With near infrared time-domain imaging we followed the biodistribution in mice up to 7 days after intravenous injection of the nanoparticles. The peak concentration in the head of mice was detected between 19 and 24 h. The precise particle distribution in the brain was studied ex vivo by X-ray microtomography, confocal laser and fluorescence microscopy. We found that the particles mainly accumulate in the hippocampus, thalamus, hypothalamus, and the cerebral cortex.     

Antimicrobial activity of nisin against Oenococcus oeni and other wine bacteria

Nisin is a bacteriocin used against food spoilage bacteria. Sulphur dioxide is a potent antioxidant as well as an antimicrobial agent widely used in the wine industry. In this study we describe the effect of these important antibacterial agents on the growth of a collection of 64 lactic acid bacteria (23 Oenococcus, 29 Lactobacillus, 3 Leuconostoc and 9 Pediococcus), 23 acetic acid bacteria and 20 yeast isolates, most of them recovered from wine. Minimal inhibitory concentrations (MIC) and minimal bactericide concentrations of nisin, potassium metabisulphite and ethanol were determined. Nisin MIC(50) values for the tested isolates were as follows: 0.024, 12.5, 200 and > or micro for oenococci, lactobacilli-pediococci-leuconostoc, acetic acid bacteria and yeasts, respectively. Synergistic effects on bacterial growth inhibition were observed, and potassium metabisulphite MIC(50) values decreased from one to three orders of dilution when it was combined with subinhibitory concentrations of nisin in the growth media. This effect was observed in all lactic acid bacteria species of our study. Significant differences in nisin sensitivity were observed between Gram-positive and Gram-negative bacteria, and between Oenococcus oeni and other species of lactic acid bacteria. It is concluded that appropriate combinations of nisin and metabisulphite could control the growth of spoilage bacteria in wine and therefore allow a decrease in the levels of sulphur dioxide currently used by the wine industry.     

X-ray characterization of three possible edible oleogelators: Experiment and theory

Three oleogelator molecules (Triacontane (TC), Stearic acid (SA), and Behenyl Lignocerate (BL)) were studied individually, in pairs, or all together to make an oleogel using triolein as the oil. WAXS, SAXS and USAXS were used to elucidate the solid structures from angstroms to a few micrometers. A two-dimensional mapping of atomic positions for each molecule was carried out to understand the crystalline multilayer structures formed. We assumed that the molecules were rigidly extended and that they underwent no significant (hindered) rotations so that the free energy is determined by the Lennard-Jones interactions of closely packed multilayers. TC molecules were predicted to form a tilt angle of ${\theta }_t\approx 33°$, yielding a SAXS line at $q\approx 0.194$ Å^─1, in acceptable agreement with the measured $q=0.181{\AA }^{-1}$. For SA crystals ${\theta }_t\approx 33°$ (predicted) yielding a SAXS line at $q=0.150{\AA }^{-1}$ compared to $q=0.159{\AA }^{-1}$ (observed). No mixed crystals were observed for any pair of molecules or when all three were used. USAXS data showed that SA forms large nanocrystals compared to TC and BL. All three combinations of molecular pairs showed basic scatterers smaller or similar to those of individual molecules. The theory presented here, together with the experimental results, showed why no mixed crystals are formed from two or all three molecules. Data from the USAXS region suggested that, when using all three molecules, a more compact fractal structure was obtained, compared with those if one or two of the molecules were used.