The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

UPGRADING OF SUGAR CANE BAGASSE BY THERMAL PROCESSES. 4. COAL CO-PROCESSING USING SUGAR CANE BAGASSE OIL AS SOLVENT

In the present work, coal co-processing with sugar cane bagasse oil was studied for the first time. Sugar cane bagasse was chosen due to its great offer, since it is a residue in the process of a large project named PROALCOOL aiming the producing ethanolfrom sugarcane. In addition, the liquefaction of sugar cane bagasse with monoethanolamine was already developed in our laboratory showing good results. Four coal samples were studied. The yields of the total conversion and the oil productions were obtained in order to evaluate the efficiency of the liquefaction process studied.     

Phase equilibrium in a polarized saturated3He—4He mixture

We present experimental results on the phase equilibrium of a saturated³He−⁴He mixture, which has been cooled to a temperature of 10–15 mK and polarized in a⁴He circulating dilution refrigerator to a stationary polarization of 15%, 7 times higher than the equilibrium polarization in the external field of 7 T. The pressure dependence of the polarization enhancement in the refrigerator shows that the molar susceptibilities of the concentrated and dilute phase of a saturared³He-⁴He mixture are equal atp=2.60±0.04 bar. This result affects the Fermi liquid parameters of the dilute phase. The osmotic pressure in the dilute phase has been measured as a function of the polarization of the coexisting concentrated phase up to 15%. We find that the osmotic pressure at low polarization (<7%) agrees well with thermodynamics using the new Fermi liquid parameters of the dilute phase.     

β-hydroxyacyl-coa-dehydrogenase (HADH) activity of unfrozen and frozen—thawed frog (Rana esculenta) legs

The β-hydroxyacyl-CoA-dehydrogenase (HADH) activity of unfrozen and thawed frog legs was investigated. The enzyme was extracted by either immersing frog legs in phosphate buffer 0.1 M, pH 6.0 at 25°C for 15 min or pressing them between trichinoscopy glasses. The enzyme activity was assayed using acetoacetyl-CoA as substrate and measured spectrophotometrically at 340 nm. It was possible by both extraction methods to distinguish between thawed and unfrozen samples although when the juice was obtained by pressing the HADH activity of the dilution was ～ 1.5 times higher than that obtained by immersion. The HADH activity was significantly higher (P≤0·001) in frozen-thawed frogs than in unfrozen legs because during freezing there is a release of HADH. No significative differences were found in the HADH activity in samples frozen in the temperature range -10 to -196°C. HADH activity was not affected by the storage time in crushed ice up to 6 days.     

A 150 MHz 0.6 μm BiCMOS superscalar microprocessor

An implementation of the Pentium microprocessor architecture in 0.6 μm BiCMOS technology is described. Power dissipation is reduced and performance is enhanced over the previous generation. Processor features, implementation technology, and circuit techniques are discussed. An internal clock rate of 150 MHz is achieved at 3.7 V and -55°C     

Efficient computation of the steady-state response of periodicnonlinear microwave circuits using a convolution-based sample-balancetechnique

The authors describe an efficient and robust approach to the computation of the steady-state response of periodic nonlinear microwave circuits. The problem of solving a set of differential equations is converted into that of solving a system of nonlinear algebraic equations using a technique called convolution-based sample balance. Although exact in all cases for which harmonic-balance techniques are exact, this technique does not require the use of discrete Fourier transforms, and calculating the Jacobian is straightforward. For the solution of the resulting system of nonlinear equations, an efficient and yet robust algorithm has been developed. In the examples given, savings in computational effort of over 85% are reported when this algorithm is compared with Newton's method     

Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

UPGRADING OF SUGAR CANE BAGASSE BY THERMAL PROCESSES. 5. CHARACTERIZATION OF THE OILS OBTAINED FROM COAL CO-PROCESSING WITH SUGARCANE BAGASSE OIL

In the present work, the chemical characterization of the oils obtained from liquefaction of different coals with sugar cane bagasse oil and also from the liquefaction of coal with monoethanolamine are presented. Characterization of the oil samples was done with the add of spectroscopic and chromatographic techniques, including UV-vis, FTIR, NMR, preparative liquid chromatography (PLC) and high resolution gas chromatography (HRGC).