A hundred times faster: Novel,rapid sol-gel synthesis of bio-glass nanopowders (Si-Na-Ca-P system,Ca:P = 1.67) without aging

Synthesis of sol-gel glass with incorporation of Na₂O is extremely difficult, as such glasses have a great tendency to crystallize. Slow drying and aging over several days or weeks is usually required in sol-gel preparation procedures. This work reports a fast, novel route for the synthesis of bioglass powders in a considerably shortened period of 1 h. A comparative study of sol-gel derived glasses made by this novel route using rotary evaporator drying, and a conventional route using oven drying and aging, revealed that the two methods produce stabilized (devitrified) bio-glasses with virtually identical behavior and properties. Indeed, the rapidly dried powder exhibited slightly enhanced properties that should result in improved bioactivity. Fourier-transform infrared spectroscopy was used to understand the structures of the synthesized powders, and MAS-NMR was used to look at the degree of polymerization. This innovative, rapid route was successfully demonstrated to produce glass and devitrified glass nanopowders more than one hundred times quicker than the quickest reported standard drying methods.     

Design and synthesis of foam glasses from recycled materials

Recycling has emerged as an environmental key point due to the diminishing of natural resources and the generation of ever-increasing amounts of industrial solid wastes. Glass wastes are among the materials that attract great interest in the recycling concept. This work presents the results of foams production from four series of compositions. The first series comprises powders of a sodium-calcium-silicate sheet glass cullet as the main component, an alkali-earth aluminosilicate glass as an additive, and a reagent grade silicon carbide (SiC) powder as gassing agent. In the second series, the glass cullet was used in combination with fly ashes (FLA) as main components, while SiC waste from abrasive paper served as foaming agent. In the third and fourth series, carbonates (calcite and dolomite) were used for foaming powder mixtures composed of sheet glass cullet and FLA, and powdered cathode ray tube panel glasses, respectively. All the processing parameters, including the main components, the nature and content of foaming agents are shown to play a crucial role on the foaming ability and final properties of the glass foams.     

Microstructure and mechanical properties of Al2O3/ZrO2 composites by two-step sintering

Composites of Al₂O₃/ZrO₂ (containing 25, 50, and 75 vol% ZrO₂) were prepared by mixing Al₂O₃ and ZrO₂ suspensions. The microstructural control via two-step sintering (TSS) was the main objective of this work. For this purpose, different sintering curves were constructed, aiming to achieve the best temperature combination for the sintering steps that provides higher density and finer microstructure. The results were compared with single-step sintering (SSS). Furthermore, microhardness and fracture toughness were measured for the best TSS specimens under each composition. The results showed that the high densities were obtained, and the reduction of grain size was greater than 40% for two-step sintered specimens, compared to SSS ones. Consequently, microhardness values increased. However, fracture toughness values remained unchanged.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

New transesterification between ester and alkoxysilane groups: application to ethylene-co-vinyl acetate copolymer crosslinking

The transesterification between ester and alkoxysilane groups in the range of temperatures 100-250 °C takes place only in the presence of dibutyltin oxide (DBTO) as efficient catalyst. Without DBTO, no reaction is observed. This interchange reaction has been used to crosslink ethylene-co-vinylacetate copolymer. Kinetic and rheology data have shown that only two alkoxide groups from one tetrafunctional alkoxysilane molecule are involved in the crosslinking reaction.     

Imbalance diets in preschool children: study in a day-care center in the Province of Buenos Aires,Argentina

The purpose of this study was to investigate the impact of low fat diets in children aged 2 to 5. Eighty two children (40 females and 42 males) attending a school cafeteria (Province of Buenos Aires, Argentina), in a cross sectional study, were evaluated. Body weight (W), height (H) and body composition (BC) by bioimpedance were recorded. The anthropometric raw data were processed as Z-score of the weight-for-age (WEZ) and of the height-for-age (HAZ). Serum insulin-like growth factor 1 (IGF-1) and Zinc/haemoglobin ratio (Zn/Hb) were also measured. Results showed that 73.2% of the children were adequate (A) according WEZ, 13.4% were lean (L) and 13.4% overweight (O). 8.5% presented simultaneously impairment in WEZ and HAZ. Body fat percentage and energy metabolism were higher in O than in L and A (p < 0.05). Serum IGF-1's children--aged 4 to 5 years--with HAZ deficit were low than adequate HAZ ones. No statistical differences in Zn/Hb ratio between A, L and O were found. This cross sectional study suggests metabolic disorders in young children attending school cafeterias. These conclusions will allow to design balanced diets in order to optimize the resources, promote optimal growth and development and prevent adult diseases through dietary practices in childhood.     

The effect of grazing intensity and the presence of a forage legume on nitrogen dynamics in Brachiaria pastures in the Atlantic forest region of the south of Bahia, Brazil

It has been shown that with careful grazing management and addition of Pand K, but not N, fertilisers Brachiaria pastures are ableto maintain sustainable live weight gains over many years. However, standardon-farm practice, which generally involves high stocking rates, leads after afew years to pasture decline due mainly to N deficiency for grass regrowth. Togenerate an understanding of the mechanism of pasture decline and possiblemanagement options to mitigate this process, a study was performed in theAtlantic forest region of the south of Bahia state to study the N dynamics inpastures of Brachiaria humidicola subject to threedifferent stocking rates of beef cattle, with and without the presence of theforage legume Desmodium ovalifolium. Despite the fact thatthe C:N ratio of the deposited litter was high (60 to 70) the rate ofdecomposition was very rapid (k –0.07 gg^–1 day^–1) and annual rates of Nturnover through the litter pathway were between 105 and 170 kg Nha^–1 year^–1. In the grass-onlypasturesas stocking rate increased from 2 to 3 head ha^–1, N recycledinthe litter decreased by 11%, but a further increase to 4 headha^–1 decreased N recycling by 30% suggesting thatbeyonda certain critical level higher grazing stocking rates would lead to pasturedecline if there was no N addition. High stocking rates decreased theproportionof the legume in the sward, but at all rates the concentration of N in both thegreen and dead grass in the forage on offer and in the litter was higher in themixed sward. The presence of the legume caused a decrease in the C:N ratio ofthe microbial biomass while both soil N mineralisation and nitrificationincreased. This increased rate of turnover of the microbial biomass and thecontribution of N₂ fixation to the legume resulted in largeincreasesin the N recycled via litter deposition ranging from 42 to 155 kg Nha^–1 year^–1.     

Synthesis, Characterization, and Processing of Cordierite-Glass Particles Modified by Coating with an Alumina Precursor

The surfaces of cordierite and glass particles were modified by coating them with an alumina precursor using a precipitation process in the presence of urea. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy, X-ray diffraction, electrophoresis, and rheological measurements were used to characterize the coated powders. SEM and transmission electron microscopy morphologies of the coated powders revealed that amorphous and homogeneous coatings have been formed around the particles. The morphology of the coated powders showed a coiled wormlike surface. The coating Al₂O₃ layer dominated the surface properties of the coated glass and cordierite powders. The influence of the coating layer on the processing ability of cordierite-based glass-ceramics substrates by tape casting was studied in aqueous media. It could be concluded that the coating of the powders facilitates the processing and yields green and sintered tapes with denser, more homogeneous microstructures compared with the uncoated powders.     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003