Titanium-nickel shape memory clamps in small bone surgery

The therapeutic applications of titanium-nickel (TiNi) shape memory clamps with optimized structural characteristics for fixation of small bone fragments in 64 patients are presented. Our fixative makes compressive stabilization possible and enables a patient to start rehabilitation very soon after surgery. The supporting splint immobilization never exceeded 12 days. Three aspects were studied: bone union, wound healing problems and histology. Non-union occurred in 4 patients treated with only one fixative. Two clamps implanted in non-parallel planes seem to be advisable to exclude the need for longer immobilization. Neither toxic manifestation nor episodes of an allergic reaction occurred. No suppuration appeared when a heat stimulus was supplied by using a contact resistance heater. Histological evaluation of the tissue covering the implants in 22 patients did not reveal any adverse reaction. Our study suggests that by using TiNi clamps in an appropriate way, satisfactory outcomes could be achieved with respect to both biofunctionality and biocompatibility.     

Supercritical fluid extraction of alkaloids from Ilex paraguariensis St. Hil.

In this work a study about extracts obtained from Ilex paraguariensis St. Hil. leaves with supercritical CO₂ was carried out. Experiments were performed in a pilot-scale extractor with capacity of 1 L at pressure of 120, 150, 170 and 200 bar for four temperature conditions, 313.15, 323.15, 333.15 and 343.15 K. The experimental data were fitted using a mathematical model characterized by the existence of two distinct periods of extraction. Numerical results for the adjusted parameters correlated very well the supercritical extraction experimental data. The confidence of results obtained from mathematical model and experiments was assured through the chi-square test.     

Step-growth polymerization and ‘click’ chemistry: The oldest polymers rejuvenated

Since its discovery in 2001, copper catalyzed azide-alkyne ‘click’ chemistry has been extensively used in polymer chemistry to modify polymeric materials and create advanced polymer structures by efficient coupling reactions. Surprisingly, the contribution of this Huisgen cycloaddition reaction to industrially important commodity polymers, prepared by step-growth polymerization, was not existing until recently. Nevertheless, since many decades academic and industrial research was focused on finding attractive synthetic pathways to introduce large contents of different reactive functional groups in several polymer classes such as polyesters and polyurethanes. Because of the high tolerance of azide-alkyne coupling reactions to a wide variety of functional groups and to extreme reaction conditions often used in step-growth polymerizations, the straightforward synthesis of alkyne-containing building blocks created an ideal platform to modify and broaden the physico-chemical properties of step-growth polymers by choosing readily available low and high molecular weight azide components. This feature article provides a comprehensive review covering the strategies toward ‘click’-functionalization of several classes of industrially important step-growth polymers.     

Heavy metal mobility in intertidal sediments of the Scheldt estuary: Field monitoring

The current paper aims to check whether the factors affecting metal mobility in intertidal sediments and floodplain soils of the river Scheldt, as identified under controlled greenhouse conditions in previous studies, also play a similar role under variable field conditions. Moreover, we aimed to assess the importance of these factors as a function of sampling time and depth, with respect to the natural variations in water table levels. This field monitoring revealed that the mobility of metals in intertidal sediments of the Scheldt estuary indeed are affected by factors which were identified to affect the metal fate in the upper sediment layer in previous greenhouse experiments. However, the effects were often less pronounced under field conditions. This can be attributed to the lower sampling resolution, the occurrence of interactions between factors, the disturbance of microbial communities during setup of greenhouse experiments and the more moderate environmental conditions in the field, affecting microbial and enzymatic activities. At most of the sampled wetlands, the level of the water table fluctuated only slightly during fall, winter and spring, whereas it decreased substantially during summer, especially at the sites with more sandy sediments. The highest sulphide concentrations were found at the sites where the water table level never decreased considerably. These sulphides primarily suppress the availability of Cd, Cu, Ni and Zn. Organic complexation resulted in the mobilisation of Cu, Ni and Cr. The concentrations of Cd, Ni and Zn in the pore water were affected by Fe/Mn oxide reduction, whereas Cd and Zn concentrations appeared to be also affected by the salinity.     

Numerical integration of a class of 3d plastic-damage concrete models and condensation of 3d stress–strain relations for use in beam finite elements

This paper presents a method for the integration of a class of plastic-damage material models. The integration of the evolution equations results in a nonlinear problem, which is linearized and solved with the Newton–Raphson method using a sub-stepping strategy. The consistent tangent matrix can be formulated either in terms of the stress components in a general reference system or in terms of the principal stress and strain components with the former then transformed to the general reference system. In order to account for plane stress conditions, the stress–strain relations of the 3d material model are then condensed out. Plane stress conditions are imposed by the linearization of the stresses that need to be set equal to zero; thus the strain fields are updated in the corresponding directions. This solution method is extended to include transverse pressure and the effect of transverse reinforcing steel for a 3d concrete material model. The equilibrium of the stresses in the reinforcing steel and concrete is linearized and the strain fields are updated until the residual satisfies a specified tolerance. The consistent tangent matrix due to the condensation process is derived. The proposed algorithms are tested at the material and element level by comparison of numerical solutions with available experimental data.     

HVAC system optimization with CO2 concentration control using genetic algorithms

This study describes the use of genetic algorithms (GAs) for operating standard HVAC systems (HVAC—heating, ventilation and air conditioning) in order to optimize performance, primarily with regard to power saving. Genetic algorithms were introduced as an instrument for solving optimization problems. Analytic optimization procedures are widely used in other fields of engineering, but they are difficult to operate within HVAC systems, because the range of the research is usually too broad, the problems are not linear but rather discontinuous, and they mostly have complex limitations. This is why for this type of system genetic algorithms are used, since they have the qualities of robustness and efficiency that are crucial for finding the optimal solution. A simulation is conducted in order to demonstrate how much power can be saved by using the suggested method of CO₂ concentration control in a standard HVAC system. In addition to Matlab Simulink, the suggested method is verified with Energy software.     

The influence of wort aeration and yeast preoxygenation on beer staling processes

The influence of oxygen on the beer staling process is considered to be of major importance. Therefore, the impact of wort aeration, which is thought to cause wort oxidation processes, on beer ageing, has been examined. Pilsner and ale beers were produced with the classical wort aeration technique or by the use of the yeast preoxygenation process, in which yeast cells are exposed to oxygen before fermentation. The staling of these beers was studied using P&T GC–MS and sensory analysis. GC–MS analyses of the natural and forced aged beers showed no significant differences between the two treatments. Sensory evaluation of natural and forced beers confirmed these results. Thus, normal wort aeration (8 mg/l) does not appear to determine flavour stability in a direct manner. This is probably due to the short contact of the wort with oxygen at low temperatures before the onset of fermentation.     

Interactive Multi‐objective Dynamic Optimization of Bioreactors under Parametric Uncertainty

Model‐based optimization techniques play a key role in achieving a sustainable operation of biochemical processes. Models are an approximation of the real process under study, hence, uncertainty is inherently present and for a sustainable process operation this uncertainty should be accounted for. In practice, optimality with respect to different conflicting objectives is required and multi‐objective optimization is a valuable tool. In this article the sigma point approach is applied to account for parametric uncertainty in the frame of interactive multi‐objective bioprocess optimization.     

Combining laser chemical processing and aerosol jet printing: a laboratory scale feasibility study

First results showing the viability of combining laser chemical processing (LCP) and aerosol jet printing (AJP) technologies to produce a high‐efficiency front side for silicon solar cells are presented. LCP simultaneously opens the anti‐reflection coating (ARC) and highly dopes the underlying silicon to create a selective emitter, while AJP is the first in a two‐step fine‐line contact formation procedure. The electrical properties as well as the morphology of the resulting structures are presented. Performance similar to that achieved with evaporated TiPdAg metallization is demonstrated. Copyright © 2010 John Wiley & Sons, Ltd.     

Peritoneal Fluid from Patients with Ovarian Endometriosis Displays Immunosuppressive Potential and Stimulates Th2 Response

Endometriosis is a common gynaecological disorder characterized by the ectopic growth of endometrial tissue outside the uterine cavity. It is associated with chronic pelvic inflammation and autoimmune reactivity manifesting by autoantibody production and abrogated cellular immune responses. Endometriotic peritoneal fluid contains various infiltrating leucocyte populations and a bulk of proinflammatory and immunoregulatory cytokines. However, the nature and significance of the peritoneal milieu in women with endometriosis still remains obscure. Therefore, the aim of the present study was to investigate the immunoregulatory activity of the peritoneal fluid (PF) from women with endometriosis. The peritoneal fluid samples were collected during laparoscopic surgery from 30 women with and without endometriosis. Immunoregulatory cytokines (IL-2, IL-4, IL-6, IL-10, IL-17A, IFN-γ and TNF) and chemokines (CCL2, CCL5, CXCL8 and CXCL9) were evaluated in PF and culture supernatants generated by unstimulated and CD3/CD28/IL-2-stimulated CD4⁺ T cells cultured in the presence of PF. The effect of PF on the generation of Treg and Th17 cells in CD4⁺ T cell cultures, as well as the natural cytotoxic activity of peripheral blood mononuclear cells, was also investigated. Concentrations of IL-6, IL-10, CCL2, CXCL8 and CXCL9 were significantly upregulated in the PF from women with endometriosis when compared to control women, whereas concentrations of other cytokines and chemokines were unaffected. The culturing of unstimulated and CD3/CD28/IL-2-stimulated CD4⁺ T cells in the presence of endometriotic PF resulted in the downregulation of their IL-2, IFN-γ, IL-17A and TNF production as compared to culture medium alone. On the other side, endometriotic PF significantly stimulated the production of IL-4 and IL-10. Endometriotic PF also stimulated the release of CCL2 and CXCL8, whereas the production of CCL5 and CXCL9 was downregulated. Endometriotic PF stimulated the generation of Treg cells and had an inhibitory effect on the generation of Th17 cells in cultures of CD4⁺ T cells. It also inhibited the NK cell cytotoxic activity of the peripheral blood lymphocytes. These results strongly imply that the PF from patients with endometriosis has immunoregulatory/immunosuppressive activity and shifts the Th1/Th2 cytokine balance toward the Th2 response, which may account for deviation of local and systemic immune responses. However, a similar trend, albeit not a statistically significant one, was also observed in case of PF from women without endometriosis, thus suggesting that peritoneal milieu may in general display some immunoregulatory/immunosuppressive properties. It should be stressed, however, that our present observations were made on a relatively small number of PF samples and further studies are needed to reveal possible mechanism(s) responsible for this phenomenon.