Intercomparison of the Realization of the ITS-90 at the Freezing Points of Al and Ag among European NMIs

The EUROMET.T-K4 comparison is the regional extension of CCT-K4, an intercomparison of the realizations of the freezing points of Al (660.323°C) and Ag (961.78°C). The intercomparison was organized in four loops. Long-stem standard platinum resistance thermometers (SPRTs) were used as traveling standards: 25 Ω thermometers to be used only at the Al freezing point and two high-temperature standard platinum resistance thermometers (HTSPRTs) to be used only at the Ag freezing point in each loop. Parallel to the measurements with thermometers, the pilots and sub-pilots organized an internal intercomparison using an Ag fixed-point cell. Most HTSPRTs showed a strong drift which is mainly due to mechanical stress and poisoning of the sensor by impurities. This drift can be partially compensated by a correction based on Matthiessen’s rule. An evaluation of the data taking into account both HTSPRTs in each loop, the linkage of the sub-pilots by measurements at the Ag freezing point, and a possible compensation according to Matthiessens’s rule, allows calculation of the results of the participants’ measurements at the Ag freezing point. The results of the participating laboratories are summarized, and proposals for key comparison reference values and linking of the results to CCT-K3 and CCT-K4 are presented.     

Optical fibre-based micro-analyser for indirect measurements of volatile amines levels in fish

An analytical method based on optical fibre (OF) detection has been developed and validated for monitoring of trimethylamine (TMA) and dimethylamine (DMA) in fish handling environments and for non invasive assessment of fish quality.     

Measurement of concrete E-modulus evolution since casting: A novel method based on ambient vibration

The use of ambient vibration tests to characterize the evolution of E-modulus of concrete right after casting is investigated in this paper. A new methodology is proposed, which starts by casting a concrete cylindrical beam inside a hollow acrylic formwork. This beam is then placed horizontally, simply supported at both extremities, and vertical accelerations resulting from ambient vibration are measured at mid-span. Processing these mid-span acceleration time series using power spectral density functions allows a continuous identification of the first flexural frequency of vibration of the composite beam, which in turn is correlated with the evolutive E-modulus of concrete since casting. Together with experiments conducted with the proposed methodology, a complementary validation campaign for concrete E-modulus determination was undertaken by static loading tests performed on the composite beam, as well as by standard compressive tests of concrete cylinders of the same batch loaded at different ages.     

Fracture Mechanics Tests in Adhesively Bonded Joints: A Literature Review

Fracture mechanics characterization tests for adhesive joints are analyzed and reviewed in order to understand their advantages and disadvantages. Data reduction techniques for analytical methods are summarized to understand the improvements implemented in each test. Numerical approaches are also used complementing tests information. Both linear and non-linear methods to obtain the fracture energy release rate are presented. Pure mode I and mode II tests are described. Simple mixed-mode tests, varying only the specimen geometry, with limited mode-mixity are also presented. Performing a wider mode-mixity range requires sophisticated apparatus that are studied in detail. There is no general agreement about the test suitability for mixed-mode fracture assessment of adhesive joints. A universal test that can easily be performed and give accurate results is essential to optimize the expensive testing at the design stage.     

Synthesis of Chalcogenophenes via Cyclization of 1,3‐Diynes Promoted by Iron(III) Chloride and Dialkyl Dichalcogenides

In this paper, we report the iron(III) chloride and dibutyl diselenide‐mediated cyclization of 1,3‐diynes which leads to 3,4‐bis(butylselanyl)selenophenes. The optimization studies showed that the reaction was best performed with equimolar amounts of iron(III) chloride and dibutyl diselenide in dichloromethane at 40 °C for 4 h. The method allows the synthesis of symmetrical and unsymmetrical selenophenes in moderate to good yields. A similar protocol was also extended to the synthesis of thiophene derivatives using dimethyl disulfide instead of dibutyl diselenide. The resulting selenophenes and thiophenes were further functionalized by selenium–halogen exchange reactions, Sonogashira cross‐coupling reactions and electrophilic cyclizations.

     

Pathogen‐Mimicking MnO Nanoparticles for Selective Activation of the TLR9 Pathway and Imaging of Cancer Cells

Here, design of the first pathogen‐mimicking metal oxide nanoparticles with the ability to enter cancer cells and to selectively target and activate the TLR9 pathway, and with optical and MR imaging capabilities, is reported. The immobilization of ssDNA (CpG ODN 2006) on MnO nanoparticles is performed via the phosphoramidite route using a multifunctional polymer. The multifunctional polymer used for the nanoparticle surface modification not only affords a protective organic biocompatible shell but also provides an efficient and convenient means for loading immunostimulatory oligonucleotides. Since fluorescent molecules are amenable to photodetection, a chromophore (Rhodamine) is introduced into the polymer chain to trace the nanoparticles in Caki‐1 (human kidney cancer) cells. The ssDNA coupled nanoparticles are used to target Toll‐like receptors 9 (TLR9) receptors inside the cells and to activate the classical TLR cascade. The presence of TLR9 is demonstrated independently in the Caki‐1 cell line by western blotting and immunostaining techniques. The magnetic properties of the MnO core make functionalized MnO nanoparticles potential diagnostic agents for magnetic resonance imaging (MRI) thereby enabling multimodal detection by a combination of MR and optical imaging methods. The trimodal nanoparticles allow the imaging of cellular trafficking by different means and simultaneously are an effective drug carrier system.     

Components of a Variance Model for the Analysis of Repeated Measurements in Fixed-Point Comparisons

Experimental design is a statistical tool concerned with the planning of experiments to obtain the maximum amount of information from the available resources. This tool may be applied to metrology, especially for the analysis of a large number of repeated measurements (replicates) of short-term repeatability and the medium-term and long-term reproducibilities, enabling the inclusion of these “time-dependent sources of variability” in the uncertainty budget. The realization of the International Temperature Scale of 1990 (ITS-90) scale requires that laboratories usually have more than one cell for each fixed point, for comparison on a regular basis. The calculation of the uncertainty of such comparisons is considered here, taking into account these time-dependent sources of variability. These components of the uncertainty evaluated by a Type A method are obtained by the statistical analysis of the experimental results using the components of a variance model for designs consisting of nested or hierarchical sequences of measurements, as foreseen by the mainstream GUM. An application example of a balanced nested structure in the comparison of two fixed-point cells is presented.     

Determination of the fracture envelope of an adhesive joint as a function of moisture

Adhesive joints in the transportation industry may be exposed to aggressive environments such as humidity during their service life, which may influence their reliability. This research aims to determine the fracture toughness of aluminium bonded joints under pure mode I, pure mode II and mixed mode I and II loadings in dry and wet condition, with the main purpose to predict the influence of humidity in the toughness properties of an adhesive. It was found that water does influence the fracture mechanics properties, increasing mode I fracture toughness and decreasing mode II fracture toughness.     

Calculating SPRT Interpolation Error

Interpolation error is a major source of uncertainty in the calibration of standard platinum resistance thermometer (SPRT) in the subranges of the International Temperature Scale of 1990 (ITS-90). This interpolation error arises because the interpolation equations prescribed by the ITS-90 cannot perfectly accommodate all the SPRTs natural variations in the resistance–temperature behavior, and generates different forms of non-uniqueness. This paper investigates the type 3 non-uniqueness for fourteen SPRTs of five different manufacturers calibrated over the water–zinc subrange and demonstrates the use of the method of divided differences for calculating the interpolation error. The calculated maximum standard deviation of 0.25 mK (near \(100\,^{\circ }\hbox {C}\)) is similar to that observed in previous studies.     

Riparian vegetation restoration: Does social perception reflect ecological value?

Social‐ecological contexts are key to the success of ecological restoration projects. The ecological quality of restoration efforts, however, may not be fully evident to stakeholders, particularly if the desired aesthetic experience is not delivered. Aesthetically pleasing landscapes are more highly appreciated and tend to be better protected than less appealing landscapes, regardless of their ecological value. Positive public perception of restoration actions may therefore facilitate stakeholder involvement and catalyse recognition of ecological improvement. Here we aim to contrast aesthetical perception and ecological condition in headwater river reaches restored through passive ecological restoration in study areas in Portugal (Alentejo) and France (Normandy). We recorded structural and functional indicators of riparian vegetation to monitor the ecological condition of study sites along a passive restoration trajectory. Aesthetical perception indicators were assessed through stakeholder inquiries developed under a semantic differential approach. We analysed perception responses to changes in the riparian ecosystems resulting from passive ecological restoration across different geographical contexts and social groups. The analysed social groups comprised stakeholders (environmental managers and landowners) and university students (landscape architecture and geography students). Results indicate that (a) visual preferences often do not reflect changes in ecological condition, (b) perception of the restoration process is strongly context dependent, and (c) experience and cultural background affect perception of ecological condition across the different social groups analysed. Clear identification of relevant stakeholder groups (those interested in or directly affected by restoration), effective communication, and stakeholder engagement are therefore essential for assuring the success of river restoration projects.