Catalysts based in cerium oxide for wet oxidation of acrylic acid in the prevention of environmental risks

Acrylic acid is a refractory compound for the non-catalytic wet oxidation (WO) process and can seriously damage the environment when released in industrial effluents. Oxidation of acrylic acid by catalytic wet oxidation (CWO) was studied in slurry conditions in a high-pressure batch reactor at 200 °C and 15 bar of oxygen partial pressure. Several solid cerium-based catalysts prepared in our laboratory were used (Ag/Ce, Co/Ce, Mn/Ce, CeO, MnO) and evaluated in terms of activity, selectivity and stability. Mn/Ce shows the higher activity in 2 h with 97.7% reduction of total organic carbon (TOC) followed by: MnO(95.5%)>Ag/Ce(85.0%)>Co/Ce(65.1%)>CeO(61.2%). Attempts were also carried out to analyze the influence of different Mn/Ce molar ratios. High percentages of Mn lead to practically total organic carbon concentration (TOC) abatements while low ratios lead to the formation of non-oxidizable compounds. Acrylic acid was readily degraded by all the catalysts pointing out the high importance of using a catalytic process. pH was an indicator of the reaction pathway and acetic acid was found as the major reaction intermediate compound; however it is completely oxidized after 2 h with exception for Co/Ce, CeO and MnO. Carbon adsorption and leaching of metals were poorly found for Mn/Ce indicating high stability. The catalyst microstructure after the reaction was analyzed and formation of whiskers of β-MnO₂ (or less probably MnOOH) were observed at the catalyst surface. Therefore, Mn/Ce revealed to be a promising catalyst for the treatment of effluents containing acrylic acid; nevertheless, its commercialization depends on further research.     

Water flux,DSC, and cytotoxicity characterization of membranes of cellulose acetate produced from sugar cane bagasse,using PEG 600

Summary In this article, cellulose acetate produced through the homogeneous acetylation of sugar cane bagasse cellulose was used to produce membranes, using poly(ethyleneglycol) 600 (PEG 600) as an admixture. The membranes were characterized using water flux measurements (Payne’s cup), differential scanning calorimetry (DSC) and neutral red uptake (cytotoxicity). The results showed that PEG 600 acts as a crystallinity inductor and/or pore former in the cellulose acetate matrix. The induction of crystallinity is important for this system since it had not been reported on the literature yet. The results also demonstrated that the studied membranes present a nontoxic behavior.     

Incremental inconsistency detection with low memory overhead

Ensuring models’ consistency is a key concern when using a model‐based development approach. Therefore, model inconsistency detection has received significant attention over the last years. To be useful, inconsistency detection has to be sound, efficient, and scalable. Incremental detection is one way to achieve efficiency in the presence of large models. In most of the existing approaches, incrementalization is carried out at the expense of the memory consumption that becomes proportional to the model size and the number of consistency rules. In this paper, we propose a new incremental inconsistency detection approach that only consumes a small and model size‐independent amount of memory. It will therefore scale better to projects using large models and many consistency rules. Copyright © 2012 John Wiley & Sons, Ltd.     

A web-based platform for biosignal visualization and annotation

With the advent of wearable sensing and mobile technologies, biosignals have seen an increasingly growing number of application areas, leading to the collection of large volumes of data. One of the difficulties in dealing with these data sets, and in the development of automated machine learning systems which use them as input, is the lack of reliable ground truth information. In this paper we present a new web-based platform for visualization, retrieval and annotation of biosignals by non-technical users, aimed at improving the process of ground truth collection for biomedical applications. Moreover, a novel extendable and scalable data representation model and persistency framework is presented. The results of the experimental evaluation with possible users has further confirmed the potential of the presented framework.     

Catkin liked nano-Co3O4 catalyst built-in organic microreactor by PEMOCVD method for trace CO oxidation at room temperature

In this paper, tricobalt tetraoxide (Co₃O₄) catalyst was coated on the polydimethylsiloxane microchannel by the plasma-enhanced metal-organic chemical vapor deposition technology. The obtained Co₃O₄ film was characterized by SEM, XRD, XPS, and TEM, and the results show that the as-deposited Co₃O₄ film was initially composed of many cauliflowers-shaped microclusters. Also, the microcauliflower was transformed from an amorphous phase to a crystal phase when the Co₃O₄ film was treated by Ar and O₂ plasma for more than 20 min, and the crystal lattice line occurred on the surface of nano-sized-Co₃O₄ particles. Meanwhile, the interface of Co₃O₄ particles with diameter between 3 and 12 nm became obvious and some nano-catkin structures were also formed on the Co₃O₄ film. The ratio of Co³⁺/Co²⁺ in the spinel-type Co₃O₄ was nearly 2, and the nano-particles predominantly expose their {311}, {111}, and {220} planes. These morphologies and structure characteristics were found to be ideal for increasing the catalytic activity efficiency of Co₃O₄ for CO oxidation, and the catalytic stability of Co₃O₄ coated on the organic microreactor lasted nearly 85 h for trace CO oxidation at room temperature.     

Design methodology of piezoelectric energy-harvesting skin using topology optimization

This paper describes a design methodology for piezoelectric energy harvesters that thinly encapsulate the mechanical devices and exploit resonances from higher-order vibrational modes. The direction of polarization determines the sign of the piezoelectric tensor to avoid cancellations of electric fields from opposite polarizations in the same circuit. The resultant modified equations of state are solved by finite element method (FEM). Combining this method with the solid isotropic material with penalization (SIMP) method for piezoelectric material, we have developed an optimization methodology that optimizes the piezoelectric material layout and polarization direction. Updating the density function of the SIMP method is performed based on sensitivity analysis, the sequential linear programming on the early stage of the optimization, and the phase field method on the latter stage of the optimization to obtain clear optimal shapes without intermediate density. Numerical examples are provided that illustrate the validity and utility of the proposed method.     

Variability for oil and fatty acid composition in castorbean varieties

Thirty-six castorbean varieties were surveyed for oil and fatty acid composition, in order to determine variability of these seed compounds. A large variability of seed oil percentage was observed, ranging from 39.6 to 59.5%. Concerning the fatty acids, little variability was observed for ricinoleic acid, which was the most abundant in the oil, ranging from 83.65 to 90.00%. The other fatty acids appeared in small concentrations and showed a small range: 0.87 to 2.35, 0.68 to 1.84, 2.96 to 5.64, 3.19 to 5.98, and 0.34 to 0.91%, for palmitic, stearic, oleic, linoleic, and linolenic acid, respectively. Non-significant correlations were observed between fatty acids and seed oil percentage. However, significant correlations were observed among fatty acid concentrations: positive and negative ones. These significant correlations could be associated with the biosynthetic pathways of the fatty acids, which are not fully elucidated. They suggest, however, that selection for a particular fatty acid will tend to increase those positively correlated, and decrease those negative ones. Selection and plant breeding techniques could then be applied to modify the oil content of the castorbean seeds, considering the variability observed. For the fatty acid composition, however, the variability was not large enough to make substantial changes in their concentrations by selection procedures. More varieties should be surveyed to find out if such variability is available.     

The Influence of the Acid Sites on the Methylamines Synthesis with Cu-HZSM-5 Zeolite

There is a high industrial demand for MMA and DMA, however, the production of TMA is favored with the commercial catalysts. This work tested the methanol amination reaction with HZSM-5 and Cu/HZSM-5 zeolites (%Cu = 1.2, 3.7 and 6.0). Regarding the MMA selectivity, light differences were observed among Cu/HZSM-5 catalysts and pure zeolite, although the catalysts containing 3.7% copper was slightly more selective to MMA than the other metallic catalysts studied. From these results it is suggested that the metal loading present in the catalysts leads to a modification in the nature of the acidic sites, in particular, the selectivity depends on ratio Brönsted/Lewis acid sites. This modifications would facilitate the amines desorption during the reaction.     

The metabolism of 1-acyl-PAF in rabbit platelets and its possible interaction with PAF

The metabolism of 1-acyl-2-acetyl-sn-glycero-3-phosphocholine (1-acyl-PAF), a naturally occurring analogue of platelet activating factor (PAF), was investigated in rabbit platelets. Our studies showed that 1-acyl-[³H]PAF (1-palmitoyl-2-acetyl-sn-glycero-3-phospho[N-methyl-³H]-choline) was converted by platelets into phosphatidyl-[³H]choline ([³H]PC) in a time-dependent fashion. The formation of [³H]PC occurred at a rate similar to that observed when lyso-[³H]PC (palmitoyl-sn-glycero-3-phospho[N-methyl-³H]choline) was used as substrate. In addition, a time-dependent increase in the level of water-soluble radioactivity was observed during the incubation of platelets with either 1-acyl-[³H]PAF or lyso-[³H]PC. This increase was parallel to the formation of [³H]PC and was not observed in the presence of [¹⁴C]PAF (1-octadecyl-2-acetyl-sn-glycerol-3-phospho[N methyl-¹⁴C]choline). Analysis by thin-layer chromatography showed that the soluble radioactivity was mainly associated with glycerophosphocholine (GPC). On the other hand, the preincubation of platelets with phenylmethylsulfonyl fluoride, an inhibitor of the acetylhydrolase, reduced the hydrolysis of 1-acyl-[³H]PAF to [³H]GPC with a concomitant accumulation of radioactivity in 1-acyl-PAF. These findings suggest that 1-acyl-PAF is converted into PC through deacetylation-reacylation with lysoPC as an obligatory intermediate. The findings also indicate that the lysoPC resulting from 1-acyl-PAF is either reacylated to phosphatidylcholine (PC) or hydrolyzed to GPC by lysophospholipase. Finally, we showed that the stimulation of platelets with PAF led to a time- and concentration-dependent increase in the conversion of 1-acyl-[³H]PAF to [³H]PC. The stimulatory effect of PAF was not observed when platelets were lysed before incubation, suggesting that PAF enhances the metabolism of 1-acyl-PAF, probably by accelerating its translocation through the plasma membrane.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...