‘Living outside the house’: how families raising young children in new,private high-rise developments experience their local environment

ABSTRACT

Families are increasingly choosing to raise children in the growing number of private, high-rise apartment complexes developed in Australian capital cities. However, most of these developments have been designed for the childless and there are concerns as to how supportive these settings are for young children. This paper explores parents’ experiences of the environment surrounding their high-rise dwellings in an inner-city municipality of Melbourne, Australia using the participatory method, Photovoice. Ten parents photographed elements of their dwellings and environments that had positive or negative impacts on raising young children. Findings indicate that environments surrounding parents’ high-rise dwellings were used on a daily basis, often due to limited space within apartment complexes. However, aspects of this environment were challenging, requiring mutual accommodation between families and their immediate settings. This has implications for policy to ensure the neighbourhoods surrounding high-rise developments in inner-city areas are more child friendly.     

Extracting dust from soil: a simple solution to a tricky task

Air quality is commonly assessed by the ambient concentration of airborne particles sized smaller than 10 microm (PM10). However, in addition to concentration, particle shape as well as the type and bioaccessibility of elements adsorbed to this particulate fraction are likely to be related to subsequent respiratory health effects. In order to investigate this relationship, a relatively large mass of the relevant size fraction is needed since sample preparation is necessary prior to analysis. Most existing methods for sampling dust have been developed for analysing the dust directly, without prior handling or digestion. In order to provide sufficient material to be used for subsequent bioaccessibility analysis, these methods require repetitive and time consuming sampling as well as special equipment and procedures which are high in both cost and maintenance. This paper describes an inexpensive and relatively simple procedure for extracting the PM10 fraction from soil to be used for lung bioaccessibility studies. The method described involves dry and wet sieving in order to exclude larger size fractions as far as possible. Vacuum filtering of the wet-sieved soil solution through a 10 microm mesh was then employed to extract the required fraction. In order to avoid frequent blocking of the mesh, Stokes's law was applied in the construction of a tube which enables separation of the solution holding the smallest fraction.     

Predictive mapping of powerful owl (Ninox strenua) breeding sites using Geographical Information Systems (GIS) in urban Melbourne, Australia

Urban expansion is a principal process threatening biodiversity globally. It is predicted that over half of the world's population will reside in urban centres by 2010. If we are to conserve biodiversity, a shift in perspective from traditional ecological studies based in natural environments, to studies based in less natural environments is paramount. To effectively conserve species which occur in urban environments, comprehensive analysis is necessary to determine the processes that are driving this urban usage. Geographical Information Systems (GIS) technology provides a valuable tool for efficient spatial analysis and predictive mapping of species distributions.This study used GIS to analyze current breeding sites for the powerful owl, a vulnerable top order predator in urban Melbourne, Australia. GIS analysis suggests that a number of ecological attributes were influencing powerful owl usage of urban environments. Using these ecological attributes, predictive mapping was undertaken, which identified a number of potential breeding sites for powerful owls within urbanized Melbourne.Urban environments are traditionally perceived as “the wastelands” of natural environments, however, this study demonstrates that they have the potential to support apex predators, an important finding for the management of rare and threatened species.     

High-yield production of graphene by liquid-phase exfoliation of graphite

Fully exploiting the properties of graphene will require a method for the mass production of this remarkable material. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This is possible because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energies match that of graphene. We confirm the presence of individual graphene sheets by Raman spectroscopy, transmission electron microscopy and electron diffraction. Our method results in a monolayer yield of approximately 1 wt%, which could potentially be improved to 7-12 wt% with further processing. The absence of defects or oxides is confirmed by X-ray photoelectron, infrared and Raman spectroscopies. We are able to produce semi-transparent conducting films and conducting composites. Solution processing of graphene opens up a range of potential large-area applications, from device and sensor fabrication to liquid-phase chemistry.     

Gamma-ray bursts: cosmic rulers for the high-redshift universe?

The desire to extend the Hubble Diagram to higher redshifts than the range of current Type 1a Supernovae observations has prompted investigation into spectral correlations in gamma-ray bursts (GBRs), in the hope that standard candle-like properties can be identified. In this paper, we discuss the potential of these new 'cosmic rulers' and highlight their limitations by investigating the constraints that current data can place on an alternative Cosmological model in the form of Conformal Gravity. By fitting current Type 1a Supernovae and GRB data to the predicted luminosity distance redshift relation of both the standard Concordance Model and the Conformal Gravity, we show that currently neither model is strongly favoured at high redshift. The scatter in the current GRB data testifies to the further work required if GRBs are to cement their place as effective probes of the cosmological distance scale.     

Lipid molecular order in liver mitochondrial outer membranes, and sensitivity of carnitine palmitoyltransferase I to malonyl-CoA

Mitochondrial outer membranes were prepared from livers of rats that were in the normal fed state, starved for 48 h, or made diabetic by injection of streptozotocin. Membranes were also prepared from starved late-pregnant rats. The latter three conditions have previously been shown to induce varying degrees of desensitization of mitochondrial overt carnitine palmitoyltransferase (CPT I) to malonyl-CoA inhibition. We measured the fluorescence polarization anisotropy of two probes, 1,6-diphenyl-1,3,5-hexatriene (DPH) and 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene-p-toluenesulfonate (TMA-DPH) which, when incorporated into membranes, report on the hydrophobic core and on the peripheral regions of the bilayer, respectively. The corresponding polarization indices (r _DPH and r _TMA-DPH) were calculated. In membranes of all three conditions characterized by CPT I desensitization to malonyl-CoA, r _DPH was decreased, whereas there was no change in r _TMA-DPH, indicating that CPT I is sensitive to changes in membrane core, rather than peripheral, lipid order. The major lipid components of the membranes were analyzed. Although significant changes with physiological state were observed, there was no consistent pattern of changes in gross lipid composition accompanying the changes to membrane fluidity and CPT I sensitivity to malonyl-CoA. We conclude that CPT I kinetic characteristics are sensitive to changes in lipid composition that are localized to specific membrane microdomains.     

Levels of 12 perfluorinated chemicals in pooled australian serum, collected 2002-2003, in relation to age, gender, and region

Pooled serum samples from 3802 Australian residents were analyzed for four perfluoroalkylsulfonates, seven perfluoroalkylcarboxylates, and perfluorooctanesulfonamide (PFOSA). Serum was collected from men and women of five different age groups and from rural and urban regions in Australia. The highest mean concentration was obtained for perfluorooctane sulfonate (PFOS, 20.8 ng/mL) followed by perfluorooctanoic acid (PFOA, 7.6 ng/mL), perfluorohexane sulfonate (PFHxS, 6.2 ng/mL), perfluorononanoic acid (PFNA, 1.1 ng/mL), and PFOSA (0.71 ng/mL). Additional four PFCs were detected in 5-18% of the samples at concentrations near the detection limits (0.1-0.5 ng/mL). An increase in PFOS concentration with increasing age in both regions and genders was observed. The male pool levels of some of the age groups compared to females were higherfor PFOS, PFOA, and PFHxS. In contrast, PFNA concentrations were higher in the female pools. No substantial difference was found in levels of PFCs between the urban and rural regions. The levels are equal or higher than previously reported serum levels in Europe and Asia but lower compared to the U.S.A. These results suggest that emissions from production in the Northern Hemisphere are of less importance for human exposure.     

Growth of InGaN quantum dots with AlGaN barrier layers via modified droplet epitaxy

The growth of c-plane InGaN quantum dots via modified droplet epitaxy with AlGaN barrier layers is reported. The growth of the AlGaN layer underlying the InGaN quantum dot layer was carried out under H₂ at 1050 °C, while the capping AlGaN layer was grown at the same temperature (710 °C) and using the same carrier gas (N₂) as that used to grow the InGaN quantum dot layer to prevent decomposition of the InGaN. Atomic force microscopy of InGaN epilayers grown and annealed on high temperature AlGaN using identical growth conditions used for the quantum dot samples highlighted a narrower distribution of nanostructure heights than that obtained for similar growth on GaN. Scanning transmission electron microscopy (STEM) imaging combined with energy dispersive X-ray (EDX) analysis revealed the presence of a thin high aluminium content layer at the surface of both AlGaN layers, which is believed to be related to loss of Ga during temperature ramping processes. Micro-photoluminescence studies carried out at low temperature revealed near resolution-limited peaks while time-resolved measurements on these peaks demonstrated mono-exponential decay times between 1 and 4 ns, showing that quantum dots had successfully been formed between the AlGaN barriers. Temperature-dependant measurement of the emission lines revealed that quenching of the peak often occurred at ∼60–70 K, with some of the peaks exhibiting significant line broadening whilst others remained narrow.