The effect of surface deformation on the hot corrosion behavior of some nickel-chromium alloys

The resistance of some NiCr alloys to Na₂SO₄-induced hot corrosion at 900°C has been found to be strongly affected by surface treatments such as grit-blasting and mechanical indentation. These cold-work procedures, when followed by recrystallization anneal, produced a large number of new grain boundaries in the deformed region. When deformed-and-annealed specimens of NiCr, Ni15 Cr and IN 738 were placed directly in contact with molten Na₂SO₄, the grain boundaries facilitated sulphur penetration and enhanced metal wastage. The deleterious effects of mechanical treatments could, in the case of Ni15 Cr, be offset by suitable thermal treatments such as pre-oxidation prior to Na₂SO₄ exposure.     

A Compact SOI-Integrated Multiwavelength Laser Source Based on Cascaded InP Microdisks

We report on the performance of a compact multi- wavelength laser (MWL) source heterogeneously integrated with and coupled to a silicon-on-insulator (SOI) waveguide circuit. The MWL consists of four InP-based microdisk lasers, coupled to a common SOI wire waveguide. The microdisk lasers operate in continuous-wave regime at room temperature, with a threshold current around 0.9 mA and a waveguide-coupled slope efficiency of up to 8 muW/mA, for a microdisk diameter of 7.5 mum. The output spectrum contains four laser peaks uniformly distributed within the free-spectral range of a single microdisk. While thermal crosstalk is negligible, laser peak output powers vary up to 8 dB for equal microdisk drive currents, as a result of loss due to coupling with higher order modes supported by the 1-mum-thick microdisks. This nonuniformity could be eliminated by reducing the microdisk thickness.     

Detection of vesicoureteral reflux using microwave radiometry-system characterization with tissue phantoms

Microwave (MW) radiometry is proposed for passive monitoring of kidney temperature to detect vesicoureteral reflux (VUR) of urine that is externally heated by a MW hyperthermia device and thereafter reflows from the bladder to kidneys during reflux. Here, we characterize in tissue-mimicking phantoms the performance of a 1.375 GHz radiometry system connected to an electromagnetically (EM) shielded microstrip log spiral antenna optimized for VUR detection. Phantom EM properties are characterized using a coaxial dielectric probe and network analyzer (NA). Power reflection and receive patterns of the antenna are measured in layered tissue phantom. Receiver spectral measurements are used to assess EM shielding provided by a metal cup surrounding the antenna. Radiometer and fiberoptic temperature data are recorded for varying volumes (10-30 mL) and temperaturesg (40-46°C) of the urine phantom at 35 mm depth surrounded by 36.5°C muscle phantom. Directional receive pattern with about 5% power spectral density at 35 mm target depth and better than -10 dB return loss from tissue load are measured for the antenna. Antenna measurements demonstrate no deterioration in power reception and effective EM shielding in the presence of the metal cup. Radiometry power measurements are in excellent agreement with the temperature of the kidney phantom. Laboratory testing of the radiometry system in temperature-controlled phantoms supports the feasibility of passive kidney thermometry for VUR detection.     

Proportional Plus Integral Control for Set-Point Regulation of a Class of Nonlinear RLC Circuits

In this paper we identify graph-theoretic conditions which allow us to write a nonlinear RLC circuit as port-Hamiltonian with constant input matrices. We show that under additional monotonicity conditions on the network’s components, the circuit enjoys the property of relative passivity, an extended notion of classical passivity. The property of relative passivity is then used to build simple, yet robust and globally stable, proportional plus integral controllers. This work was partially supported by CONACyT, México.     

Electroporation-Induced Cell Modifications Detected with THz Time-Domain Spectroscopy

Electroporation (electropermeabilization) increases the electrical conductivity of biological cell membranes and lowers transport barriers for normally impermeant materials. Molecular simulations suggest that electroporation begins with the reorganization of water and lipid head group dipoles in the phospholipid bilayer interface, driven by an externally applied electric field, and the evolution of the resulting defects into water-filled, lipid pores. The interior of the electroporated membrane thus contains water, which should provide a signature for detection of the electropermeabilized state. In this feasibility study, we use THz time-domain spectroscopy, a powerful tool for investigating biomolecular systems and their interactions with water, to detect electroporation in human cells subjected to permeabilizing pulsed electric fields (PEFs). The time-domain response of electroporated human monocytes was acquired with a commercial THz, time-domain spectrometer. For each sample, frequency spectra were calculated, and the absorption coefficient and refractive index were extracted in the frequency range between 0.2 and 1.5 THz. This analysis reveals a higher absorption of THz radiation by PEF-exposed cells, with respect to sham-exposed ones, consistent with the intrusion of water into the cell through the permeabilized membrane that is presumed to be associated with electroporation.     

Self‐Assembly of Atomically Thin Chiral Copper Heterostructures Templated by Black Phosphorus

The fabrication of 2D systems for electronic devices is not straightforward, with top‐down low‐yield methods often employed leading to irregular nanostructures and lower quality devices. Here, a simple and reproducible method to trigger self‐assembly of arrays of high aspect‐ratio chiral copper heterostructures templated by the structural anisotropy in black phosphorus (BP) nanosheets is presented. Using quantitative atomic resolution aberration‐corrected scanning transmission electron microscopy imaging, in situ heating transmission electron microscopy and electron energy‐loss spectroscopy arrays of heterostructures forming at speeds exceeding 100 nm s^?1 and displaying long‐range order over micrometers are observed. The controlled instigation of the self‐assembly of the Cu heterostructures embedded in BP is achieved using conventional electron beam lithography combined with site specific placement of Cu nanoparticles. Density functional theory calculations are used to investigate the atomic structure and suggest a metallic nature of the Cu heterostructures grown in BP. The findings of this new hybrid material with unique dimensionality, chirality, and metallic nature and its triggered self‐assembly open new and exciting opportunities for next generation, self‐assembling devices.     

Ionic‐Liquid Gating of InAs Nanowire‐Based Field‐Effect Transistors

Here, the operation of a field‐effect transistor based on a single InAs nanowire gated by an ionic liquid is reported. Liquid gating yields very efficient carrier modulation with a transconductance value 30 times larger than standard back gating with the SiO₂/Si₊₊ substrate. Thanks to this wide modulation, the controlled evolution from semiconductor to metallic‐like behavior in the nanowire is shown. This work provides the first systematic study of ionic‐liquid gating in electronic devices based on individual III–V semiconductor nanowires: this architecture opens the way to a wide range of fundamental and applied studies from the phase transitions to bioelectronics.