A comparison between intravenous iron polymaltose complex (Ferrum Hausmann) and oral ferrous fumarate in the treatment of iron deficiency anaemia in pregnancy

The costs of remedial work, and the radon level reduction achieved, have been studied in a series of domestic properties in Northamptonshire, which is a radon affected area. The cost-effectiveness of the series is similar to published theoretical estimates for proposed national remediation programmes, and five times more effective than our similar analysis for the National Health Service workplace, if it is assumed that 100% of householders discovering levels above 300 Bq m-3 implement remediation. In practice, in the UK, far fewer of those who arrange an initial radon test proceed to remediation, but this domestic programme could be cost effective if more than 5% carry out remediation. Our series confirms that a considerable number of householders with radon levels in the 200 to 300 Bq m-3 range do not seek or implement remediation work.     

One-stage sternal stenting with homograft bone after cardiac operation in pediatric patients

Low cardiac output after open heart operations in neonates and infants carries a high mortality. Delayed sternal closure may be life-saving but may prolong hospital stay and increase costs. To circumvent these issues, we shaped homograft bone and interposed it between the sternal edges to allow primary wound closure in 2 pediatric patients. Midterm results are satisfactory.     

Synthesis and Properties of the Bi-Based Superconducting Powder Prepared by the Pechini Process

Bi-based superconductors are of great interest in high-temperature superconductors. We describe what is believed to be the first synthesis of these materials using the Pechini process, a low-temperature synthetic method that often yields inorganic oxide of excellent phase purity and well-controlled stoichiometry. Using this process, it has been possible to synthesize phase-pure Bi-2223 phase by calcining the appropriate polymeric precursors in air at 800°C for several hours. The superconductivity studies show that the Pechini-synthesized materials appear to offer high-quality performance.     

The effect of Pseudomonas aeruginosa infection on clinical parameters in steady-state bronchiectasis

STUDY OBJECTIVE: To investigate the effect of Pseudomonas aeruginosa infection on clinical parameters in Chinese patients with noncystic fibrosis and steady-state bronchiectasis. DESIGN: Prospective, cross-sectional clinicomicrobiological study with informed consent. SETTING: Consecutive outpatient recruitment from a specialist bronchiectasis respiratory clinic. PATIENTS: Outpatients (n = 100; 62 women; 55.1+/-16.7 years old; FEV1/FVC 1.4+/-0.7/2.1+/-0.9 L), who had stable respiratory symptoms for more than 3 weeks. MEASUREMENTS AND RESULTS: Respiratory pathogens isolated from the sputum were: Pseudomonas aeruginosa (33), Haemophilus influenzae (10), Moraxella catarrhalis (2), other Gram-negative bacilli (5), Streptococcus pneumoniae (6), Staphylococcus aureus (5), mycobacteria (3), and yeast (1). Clinical parameters in patients with positive isolation of P aeruginosa were compared with those without the organism in the sputum culture (non-P aeruginosa). In the P aeruginosa group, the FEV1/FVC ratio and sputum volume were lower (p < 0.005) and higher (p < 0.0001), respectively, than those of the non-P aeruginosa group. The FEV1/FVC ratio (< 60%) and sputum volume (grading > 5) were independently associated with a positive sputum isolation of P aeruginosa with odds ratios of 3.1 (confidence interval [CI] 1.2 to 8.4; p < 0.01) and 4.7 (CI 1.6 to 13.3; p < 0.001), respectively. CONCLUSIONS: P aeruginosa is the predominant respiratory pathogen isolated in the sputum of Chinese patients with steady-state bronchiectasis, and its isolation is associated with high sputum output (> or = 75th quartile) and moderately severe airflow obstruction (FEV1/FVC < 60%).     

Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

A deep multi-source adaptation transfer network for cross-subject electroencephalogram emotion recognition

Neural Computing and Applications - In real-world application of affective brain–computer interface (aBCI), individual differences across subjects and non-stationary characteristics of...     

Positive state‐bounding observer for positive interval continuous‐time systems with time delay

This paper is concerned with the problem of positive observer synthesis for positive systems with both interval parameter uncertainties and time delay. Conventional observers may no longer be applicable for such kind of systems due to the positivity constraint on the observers, and they only provide an estimate of the system state in an asymptotic way. A pair of positive observers with state‐bounding feature is proposed to estimate the state of positive systems at all times in this paper. A necessary and sufficient condition for the existence of desired observers is first established, and the observer matrices can be obtained easily through the solutions of a set of linear matrix inequalities (LMIs). Then, to reduce the error signal between the system state and its estimates, an iterative LMI algorithm is developed to compute the optimized state‐bounding observer matrices. Finally, a numerical example is presented to show the effectiveness and applicability of the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

Delay‐dependent stability for Markovian genetic regulatory networks with time‐varying delays

This paper is concerned with the problem of stochastic stability analysis for a class of genetic regulatory networks with Markovian jump parameters and time‐varying delays. A delay‐dependent stability criterion is derived by using a novel mode‐dependent Lyapunov functional. The derived stability criterion is expressed in terms of linear matrix inequalities and is less conservative than the existing ones in the literature. A numerical example is provided to demonstrate the effectiveness of the proposed stability criterion. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Electrokinetically driven concentration of particles and cells by dielectrophoresis with DC-offset AC electric field

Insulator-based dielectrophoresis (iDEP) has been successfully used for on-chip manipulations of biological samples. Despite its effectiveness, iDEP typically requires high DC voltages to achieve sufficient electric field; this is mainly due to the coupled phenomena among linear electrokinetics: electroosmosis (EO) and electrophoresis (EP) and nonlinear electrokinetics: dielectrophoresis (DEP). This paper presents a microfluidic technique using DC-offset AC electric field for electrokinetic concentration of particles and cells by repulsive iDEP. This technique introduces AC electric field for producing iDEP which is decoupled from electroosmosis (EO) and electrophoresis (EP). The repulsive iDEP is generated in a PDMS tapered contraction channel that induces non-uniform electric field. The benefits of introducing AC electric field component are threefold: (i) it contributes to DEP force acting on particles, (ii) it suppresses EO flow and (iii) it does not cause any EP motion. As a result, the required DC field component that is mainly used to transport particles on the basis of EO and EP can be significantly reduced. Experimental results supported by numerical simulations showed that the total DC-offset AC electric field strength required to concentrate 15-μm particles is significantly reduced up to 85.9% as compared to using sole DC electric field. Parametric experimental studies showed that the higher buffer concentration, larger particle size and higher ratio of AC-to-DC electric field are favorable for particle concentration. In addition, the proposed technique was demonstrated for concentration of yeast cells.