Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Novel quasi-autothermal hydrogen production process in a fixed-bed using a chemical looping approach: A numerical study

This paper presents a novel quasi-autothermal hydrogen production process. The proposed layout couples a Chemical Looping Combustion (CLC) section and a Steam Methane Reforming (SMR) one. In CLC section, four packed-beds are operated using Ni as oxygen carrier and CH₄ as fuel to continuously produce a hot gaseous mixture of H₂O and CO₂. In SMR section, two fixed-beds filled with Ni-based catalyst convert CH₄ and H₂O into a H₂-rich syngas. Four heat exchangers were employed to recover residual heat content of all the exhaust gas currents. By means of a previously developed 1D numerical model, a dynamic simulation study was carried out to evaluate feasibility of the proposed system in terms of methane conversion (100% circa), hydrogen yield (about 0.65 mol_H2/mol_CH4) and selectivity (about 70%), and syngas ratio (about 2.3 mol_H2/mol_CO). Energetic and environmental analyses of the system performed with respect to conventional steam methane reforming, highlights an energy saving of about 98% and avoided CO₂ emission of about 99%.     

Performance optimization of polymer electrolyte membrane fuel cells using the Nelder-Mead algorithm

The direct-search simplex method for function optimization has been adapted to performance optimization of polymer electrolyte membrane fuel cells (PEMFCs). The established method is strongly application oriented and uses only experimentally determined data for optimization. It is not restricted to discrete parameters optimums and does not require the use of third-party software or computational resources. Hence, it is easy to implement in fuel cell testing stations. The optimization consists of finding, for a given fuel cell load, an optimum set of values of the 7 fuel cell operating parameters: the fuel cell temperature, the reactants' stoichiometric ratios, the reactants' inlet relative humidity, and the reactants' outlet pressures, resulting in the highest fuel cell performance. The performance is measured using a scalar function of the operating parameters and the load and can be defined according to needs.Two PEMFC performance functions: the fuel cell voltage and the system-related fuel cell efficiency were optimized using the procedure for practically sized PEMFC stacks of two designs. With respect to the nominal operating conditions defined as optimal for each stack design by its manufacturer, the gains from the optimization procedure were up to over 12% and up to over 7% for the stack voltage and efficiency, respectively. The validation of the procedure involved 5 stack specimens and four laboratories and consistent results were obtained.     

High Temperature Oxidation and Microstructural Evolution of Modified MCrAlY Coatings

Thermal sprayed MCrAlY coatings are widely used as a bond coat in thermal barrier systems to protect the substrate from corrosion and high temperature oxidation and to improve the compatibility between the ceramic top coat and metallic substrate. In this paper, the high temperature oxidation resistance of MCrAlY coatings with modified compositions was evaluated; in particular, the effect of the addition of reactive and refractory elements (Ta, Re, Si, and Hf) was investigated. MCrAlY coatings were obtained by high velocity oxygen fuel spray and vacuum plasma spray techniques; samples were exposed to air at 1423 K (1150 °C) and the oxidation kinetics were evaluated by measuring the thickness of the thermally grown oxide (TGO) scale at several exposure times. Experimental data confirmed that the oxidation resistance of MCrAlY coatings is strictly related to the amount of the reactive and refractory elements in the starting powders and that a thorough understanding of the microstructural modifications taking place during oxidation is essential for controlling TGO growth and thermal barriers’ durability.     

A signature protein-based method to distinguish Mediterranean water buffalo and foreign breed milk

A novel genetic variant at the α_s1-casein locus of water buffalo (WB), 8-residue shorter than its wild-type has been found and sequenced. The internal deletion of the peptide E³⁵KVNELsT⁴² was confirmed by the isolation of the junction peptide. The 8-residue deletion mutant has a molecular weight that is 919 Da less than that of the wild-type. The novel isoform with a unique f35-42 deletion could be the result of the skipping of exon 6, generating an exon 6-deleted variant of α_s1-casein. The wild-type and its shortened α_s1-casein forms were found to co-exist in many individual milk samples. In contrast, the 8-residue, internally deleted α_s1-casein variant did not occur in water buffaloes of the Mediterranean breed reared in Italy. Wild-type α_s1-casein has 6 to 8 phosphate groups (P) while the internally deleted form 6 and 7P per molecule.     

金属W中辐照缺陷的产生、演化与热回复机制

金属W是核聚变反应堆中面向等离子体部件的主要候选材料。服役期间,钨部件需要承受高温、高通量聚变反应中子轰击带来的辐照级联损伤。这些损伤主要表现为高浓度的点缺陷及团簇。它们与氢氦等离子体、嬗变反应的多种产物相互作用,导致辐照硬化、韧脆转变温度升高、导热能力下降等问题。本文围绕金属W的辐照级联损伤,基于显微缺陷实验表征与材料多尺度模拟计算,系统总结了辐照缺陷的产生、演化与热回复行为及作用机制。这些信息反映了材料中辐照缺陷特征的统计规律,构成定量描述微观损伤组织随时间尺度与空间尺度变化的依据,有利于钨部件性能的预测、服役可靠性评价以及未来新型材料部件的研发。     

Synthesis and properties of cross‐linked polymers from epoxidized rubber seed oil and triethylenetetramine

A series of epoxidized oils were prepared from rubber seed, soybean, jatropha, palm, and coconut oils. The epoxy content varied from 0.03 to 7.4 wt %, in accordance with the degree of unsaturation of the oils (lowest for coconut, highest for rubber seed oil). Bulk polymerization/curing of the epoxidized oils with triethylenetetramine (in the absence of a catalyst) was carried out in a batch setup (1 : 1 molar ratio of epoxide to primary amine groups, 100°C, 100 rpm, 30 min) followed by casting of the mixture in a steel mold (180°C, 200 bar, 21 h) and this resulted in cross‐linked resins. The effect of relevant pressing conditions such as time, temperature, pressure, and molar ratio of the epoxide and primary amine groups was investigated and modeled using multivariable nonlinear regression. Good agreement between experimental data and model were obtained. The rubber seed oil‐derived polymer has a T_g of 11.1°C, a tensile strength of 1.72 MPa, and strain at break of 182%. These values are slightly higher than for commercial epoxidized soybean oil (T_g of 6.9°C, tensile strength of 1.11 MPa, and strain at break of 145.7%). However, the comparison highlights the potential for these novel resins to be used at industrial/commercial level. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42591.