Engineered Schottky barriers on n-In0.35Ga0.65As

The Schottky barrier height in Al/n-In_0.35Ga_0.65As was engineered using thin p-type near-interface In_0.35Ga_0.65As layers grown by molecular beam epitaxy. The effect of the thickness and doping level of the p-type layer on the barrier height was also studied by computer simulation. A good agreement was obtained between the calculated and experimental barrier height values. An experimental Schottky barrier height of 0.67 eV with an ideality factor of 1.15 has been achieved.     

Shape-coordinate analysis of skeletal changes induced by rapid maxillary expansion and facial mask therapy

The aim of this study was to evaluate maxillary and mandibular shape/size changes by means of Bookstein's shape-coordinate and tensor analysis in children with Class III malocclusions treated with rapid maxillary expansion and a facial mask in order to define optimum timing of intervention for this type of therapy. The treated group (46 subjects, 26 females and 20 males) was divided into two subgroups according to the stage of dentitional development. The early-treated group consisted of 23 subjects treated in the early mixed dentition (mean age at Time 1, 6 years 9 months +/- 7 months); the late-treated group included 23 subjects treated in the late mixed dentition (mean age at Time 1, 10 years 3 months +/- 1 year). The mean treatment period was about 11 months. The control group (32 subjects with untreated Class III malocclusion, 18 females and 14 males) also was divided into two subgroups (an early control group, 17 subjects in the early mixed dentition, and a late control group, 15 subjects in the late mixed dentition). Maxillary triangles (point T, the most superior point of the anterior wall of sella turcica, point FMN, the fronto-maxillary-nasal suture, and point A) and mandibular triangles (point Condylion, point Gonion, and point Pogonion) were digitized on cephalograms in both groups at Time 1 and Time 2. Combined facial mask and rapid maxillary expansion therapy produced a significant enhancement of the forward growth of the maxilla and significantly more upward and forward direction of growth of the mandibular condyle (leading to smaller increments in mandibular total length, Co-Pg) in the early-treated group when compared with controls and to the late-treated group. Both maxillary size and mandibular size were significantly affected by treatment in the early mixed dentition. The results of this study indicate that orthopedic treatment of Class III malocclusion induces favorable size and shape changes both in the maxilla and mandible, and that this combined treatment approach is more effective in the early mixed dentition than in the late mixed dentition.     

Clustering of Y chromosome deletions in subinterval E of interval 6 supports the existence of an oligozoospermia critical region outside the DAZ gene

Y chromosome molecular analysis was performed using the STS-PCR technique in 50 patients with oligozoospermia. Microdeletions of interval 6 of the Y chromosome were detected in seven patients, in six of whom subinterval E was affected. All patients retained the RBM1 and DAZ genes, while in one deletion involved the SPGY gene. The size of the deletion was not apparently related to the severity of the disease. These results suggest the presence of an oligozoospermia critical region on the Y chromosome within subinterval E of interval 6.     

Identification of viable myocardium by 201Tl scintigraphy: a comparison of methods

The present study was undertaken to compare four different imaging approaches to evaluate uptake defect reversibility. 24 infarcted patients underwent standard stress/redistribution 201Tl imaging (R1). Then, after reinjection of 37 MBq of 201Tl, patients were re-imaged either after 15 min (R2) 24 h later (R3). A separate rest study (R4) following a new tracer injection was done within 2-3 days. Planar images were obtained in the standard three views and subdivided into 216 segments for qualitative analysis based on a visual score. A semiquantitative analysis based upon circumferential profiles was also applied. A stress defect was found in 127 segments (58.7%). By visual inspection reperfusion was considered to occur in 32.3%, 41.7%, 33.0% and 49.6% of the cases with R1, R2, R3, and R4, respectively. The semiquantitative method showed a high reperfusion only with R1 (62%), while the other procedures proved less effective. No improvement was found with R4. Six patients (25%) showed myocardial viability that was not detected with the early reinjection technique.     

A versatile and practical synthesis toward the development of novel HIV-1 integrase inhibitors

As a continuation of our previous work, which resulted in the identification of a new hit compound as an HIV-1 integrase inhibitor, three novel series of salicylic acid derivatives were synthesized using three versatile and practical synthetic strategies and were assayed for their capacity to inhibit the catalytic activity of HIV-1 integrase. Biological evaluations revealed that some of the synthesized compounds possess good inhibitory potency in enzymatic assays and are able to inhibit viral replication in MT-4 cells at low micromolar concentrations. Finally, docking studies were conducted to analyze the binding mode of the synthesized compounds within the DNA binding site of integrase in order to refine their structure-activity relationships.     

Effects of High Pressure Homogenization on Beer Quality Attributes

The aim of the present study was to evaluate the use of high pressure homogenization (HPH) as an alternative to thermal pasteurization for beer stabilization and to evaluate the effect of processing on colour, haze and redox potential immediately after the process and during the product shelf‐life (100 days). The results obtained showed good colour retention, changes in the redox potential and greater values for turbidity, presenting a higher value for the product treated by HPH than for the thermally treated samples reported in literature. The evaluation of the results indicated that the HPH process is a promising process for beer treatment in terms of guaranteeing better colour retention. However to make this product stable, it would be necessary to perform stabilization treatments to minimize the negative effects of processing on the haze of the final product.     

Inactivation of Aspergillus niger in Mango Nectar by High-Pressure Homogenization Combined with Heat Shock

ABSTRACT:  This research evaluated the inactivation of a heat-resistant  Aspergillus niger  conidia in mango nectar by high-pressure homogenization (HPH) combined with heat shock.  A.niger  were inoculated in mango nectar (10⁶ conidia mL⁻¹) and subjected to HPH (300 to 100 MPa) and heat shock (80 °C for 5 to 20 min) before or after HPH. Processes were evaluated according to number of decimal reductions reached by each isolated or combined process. Scanning electron microscopy was performed to observe conidia wall after pressure treatment. Pressures below 150 MPa did not inactivate  A. niger  while pressures of 200 and 300 MPa resulted in 2 and more than 6 log reductions, respectively. D_{80 °C} of  A. niger  was determined as 5.03 min. A heat shock of 80 °C/15 min, reaching 3 decimal conidia reductions, was applied before or after a 200 MPa pressure treatment to improve the decimal reduction to 5 log cycles. Results indicated that HPH inactivated  A. niger  in mango nectar at 300 MPa (>6.24 log cycles) and that, with pressure (200 MPa) combined with post heat shock, it was possible to obtain the same decimal reduction, showing a synergistic effect. On the other hand, pre heat shock associated with HPH resulted in an additive effect. The observation of  A. niger  conidia treated by HPH at 100 and 200 MPa by scanning electron microscopy indicated that HPH promoted intense cell wall damage, which can sensitize the conidia to post heat shock and possibly explain the synergistic effect observed.
Practical Application : The results obtained in this paper are relevant to elucidate the mechanism of conidia inactivation in order to develop the application of HPH as an alternative pasteurization process for the fruit nectar industry.     

A technique for the determination of 18O/16O and 17O/16O isotopic ratios in water from small liquid and solid samples

We have developed a new technique in which a solid reagent, cobalt(III) fluoride, is used to prepare oxygen gas for isotope ratio measurement from water derived either from direct injection or from the pyrolysis of solid samples. The technique uses continuous flow, isotope ratio monitoring, gas chromatography/mass spectrometry (irmGC/MS) to measure the delta18O and delta17O of the oxygen gas. Water from appropriate samples is evolved by a procedure of stepped pyrolysis (0-1000 degrees C, typically in 50 degrees C increments) under a flowing stream of helium carrier gas. The method has considerable advantages over others used for water analysis in that it is quick; requires only small samples, typically 1-50 mg of whole rock samples (corresponding to approximately 0.2 micromol of H2O); and the reagent is easy and safe to handle. Reproducibility in isotope ratio measurement obtained from pyrolysis of samples of a terrestrial solid standard are delta18O +/- 0.54, delta17O +/- 0.33, and delta17O +/- 0.10/1000, 1sigma in all cases. The technique was developed primarily for the analysis of meteorites, and the efficiency of the method is illustrated herein by results from water standards, solid reference materials, and a sample of the Murchison CM2 meteorite.     

Study of the lattice strain relaxation in the Ga1-X Al X Sb/GaSb system by x-ray topography and high resolution diffraction

High resolution x-ray diffraction and topographic methods have been used to study lattice strain relaxation in the Ga_1-X Al _X Sb/GaSb system. Samples with layer thickness ranging between 0.1 and 6 m and with Al concentration x=0.402±0.005 have been grown by molecular beam epitaxy at 550 °C on (0 0 1) oriented undoped GaSb LEC substrates. A first critical thickness (t _C1), related to the misfit dislocation generation, has been found to be between 0.16 < t _C1 < 0.20 m. Due to the weak sensitivity of the rocking curve to the onset of relaxation, this result has been obtained by means of a double crystal topographic technique. A plateau region in the curve of the residual strain versus thickness has been observed for t ranging between 0.2 and 0.5 m. The residual strain _res shows a dependence close to t^–0.5 above a second critical thickness value t _C2 slightly larger than 0.5 m. Finally, in the last region above a layer thickness of 3 m, strong dislocation interaction effects seem to affect the relaxation. A comparison with theoretical models has been made.