Lysosomal enzyme and inhibitor levels in the human trabecular meshwork

PURPOSE: To examine in the human trabecular meshwork lysosomal enzymes and one inhibitor of serine proteases that actively participate in the degradation of macromolecules into low molecular weight constituents. METHODS: Using an avidin-biotin-peroxidase technique, lysosomal proteases and alpha 1-proteinase inhibitor were examined in the trabecular meshwork of 23 human eyes with donor ages ranging from 2 to 90 years. These eyes were categorized into three age groups (< or = 20, 21 to 49, and > or = 50 years). Histochemical staining for lysosomal hydrolases was also performed on frozen sections of 20 human eyes. The staining was analyzed by an image analyzer and the levels of lysosomal proteases were further measured by biochemical assays. RESULTS: The trabecular meshwork from all the eyes stained intensely against antibodies to cathepsins B and G and alpha 1-proteinase inhibitor. The staining for elastase was weaker but evident. Image analyses revealed that the staining intensity for each protease or inhibitor was similar in all age groups. The staining in the uveal meshwork appeared to be the strongest among all the trabecular meshwork regions. Biochemical assays of tissue extracts confirmed that the enzyme and inhibitor levels were comparable among the three donor age groups. Activities of two lysosomal hydrolases, acid phosphatase and acid esterase, were also found in trabecular meshwork cells of 20 eyes. No apparent difference in enzyme activities was found with increasing age, and variation related to region was not observed. CONCLUSIONS: This study demonstrated the age-independent distribution of a variety of lysosomal enzymes and a protease inhibitor in the human trabecular meshwork. The presence of these proteins suggests a possible role in the metabolic operation of the trabecular meshwork.     

Accommodation of a D-Phe residue into a right-handed 3(10)-helix: structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-OMe, an analogue of the amino terminal segment of antiamoebins and emerimicins

Recently an unstable trinucleotide CTG repeat, located within the 3' untranslated region of a gene on 19q13.3 was discovered in kindreds with myotonic dystrophy (DM). The age-of-onset/severity of DM shows a good correlation with CTG repeat size, and pedigrees and data reported to date have shown a striking trend toward amplification of the size of the CTG repeat during transmission from parent to child. The amplification has been accepted as the biological explanation for anticipation in the clinical severity observed in many families with DM. In this paper we report on 3 families where CTG amplification decreased during transmission from parent to child. In one case there was a gene conversion event, while in the remaining 2 there was a simpler reduction in the size of the repeat length. The changes appear to have been accompanied by a reduction in clinical severity in the child when compared to the parent. These observations are discussed in terms of their clinical implications and the biases that may exist in much of the reported data.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Pressurized fluidized-bed hydro retort ing of raw and beneficiated Eastern oil shales

Bench-scale tests were conducted with raw and beneficiated shales in an advanced multi-purpose research reactor. Raw Alabama shale and raw and beneficiated Indiana shales were retorted at 515 °C using hydrogen pressures of 4 and 7 MPa. Shale feed rates were 15 to 34 kg h⁻¹. High oil yields and carbon conversions were achieved in all tests. Oil yield from Alabama shale hydroretorted at 7 MPa was 200% of Fischer assay. Raw and beneficiated Indiana shales hydroretorted at 7 MPa produced oil yields of 170 and 195% of Fischer assay respectively. Total carbon conversions were >70% for all tests conducted at 7 MPa.     

Electronic applications of high temperature superconductors

Over the last decade there have emerged many electronic applications of HTS technology which have important military as well as commercial implications. Examples of these include space communications, terrestrial wireless communications, radar, surveillance, countermeasures, medical applications and cryo-electronics. I will review many of the efforts in in this area that have been supported by the DoD which has invested over $350M on this technology. In addition I will discuss the efforts to develop cryocoolers to support the HTS technology.     

Crack Stability and Its Effect on Fracture Toughness of Hot-Pressed Silicon Nitride Beam Specimens

The effect of stable crack extension on fracture toughness test results was determined using single-edge precracked beam specimens. Crack growth stability was examined theoretically for bars loaded in three-point bending under displacement control. The calculations took into account the stiffness of both the specimen and the loading system. The results indicated that the stiffness of the testing system played a major role in crack growth stability. Accordingly, a test system and specimen dimensions were selected which would result in unstable or stable crack extension during the fracture toughness test, depending on the exact test conditions. Hot-pressed silicon nitride bend bars (NC132) were prepared with precracks of different lengths, resulting in specimens with different stiffnesses. The specimens with the shorter precracks and thus higher stiffness broke without stable crack extension, while those with longer cracks, and lower stiffness, broke after some stable crack extension. The fracture toughness values from the unstable tests were 10% higher than those from the stable tests. This difference, albeit small, is systematic and is not considered to be due to material or specimen-to-specimen variation. It is concluded that instability due to the stiffness of test system and specimen must be minimized to ensure some stable crack extension in a fracture toughness test of brittle materials in order to avoid inflated fracture toughness values.     

Computer-Aided Design of Corn Dryers With Quality Prediction

A new dynamic model of corn drying based on compartmental structure and quality prediction was built up from a thin layer model to industrial scale. From the system analysis to the programming, we focus mainly on numerical resolution of the equations and on the ergonomy of the software.