Esterification of ethenyl benzene and its derivatives with acetic acid in the presence of perchloric acid as a catalyst

The esterification process of ethenyl benzene and its derivative compounds (p-methyl, p-methoxy, p-chloro, m-methyl, m-nitro and m-chloro, respectively) was carried out with acetic acid and using perchloric acid as a catalyst. From the effects of the variables studied it could be concluded that: the temperature and the catalyst concentration influence positively over the olefin conversion, whereas the initial olefin concentration exert no effect over the same; and that the presence of perchloric salts exerts a different influence, depending on the temperature and on the catalyst concentration. It has been proven that the substituted radicals in the m- or p- positions exert an important influence over the conversion of the studied olefins, presenting growing reactivity in the following order: m-nitro ethenyl benzene, m-chloro ethenyl benzene, p-chloro ethenyl benzene, m-methyl ethenyl benzene, ethenyl benzene, p-methyl ethenyl benzene and p-methoxy ethenyl benzene. Finally, a kinetic and thermodynamic study has been done and the corresponding parameters have been calculated, with an adequate fitting.     

Effect of Lipase Activity and Specificity on the DAG Content of Olive Oil from the Shodoshima-Produced Olive Fruits

Olive oils have a higher relative diacylglycerol (DAG) content than other plant oils. The lipase in olive fruits is involved in DAG production and is directly related to the acidity of the olive oil. However, the lipase activity and positional selectivity have not been clarified. To investigate the properties of olive fruit lipase, olive fruits of the Mission variety harvested during mid-December of 2005 on Shodoshima Island (Japan) were stored at 20, 30 or 40 °C for 4 weeks. Changes in the acidity and acylglycerol content of the oils extracted from the stored fruits were analyzed. The acidity and DAG content of the olive oils increased due to triacylglycerol (TAG) hydrolysis during storage. sn-1,2-DAGs preferentially increased during the early stages of storage, indicating that the olive fruit lipase is enantioselective for the sn-3 position, while non-enzymatic isomerization of sn-1,2-DAGs was observed throughout the entire duration of storage. Kinetic analysis revealed that the enantioselectivity of olive fruit lipase for the sn-3 position was approximately four times greater than for the sn-1 position. The lipase was gradually inactivated at temperatures of 30 °C or higher, and the ratios of the rate constant for inactivation to TAG hydrolysis at the sn-3 position was 0.2, 13, and 23 at 20, 30, and 40 °C, respectively.     

Isolation and characterization of the carbon catabolite‐derepressing protein kinase Snf1 from the stress tolerant yeast Torulaspora delbrueckii

We cloned a genomic DNA fragment of the yeast Torulaspora delbrueckii by complementation of a Saccharomyces cerevisiae snf1Δ mutant strain. DNA sequence analysis revealed that the fragment contained a complete open reading frame (ORF), which shares a high similarity with the S. cerevisiae energy sensor protein kinase Snf1. The cloned TdSNF1 gene was able to restore growth of the S. cerevisiae snf1Δ mutant strain on media containing nonfermentable carbon sources. Furthermore, cells of the Tdsnf1Δ mutant were unable to proliferate under nonfermenting conditions. Finally, protein domain analysis showed that TdSnf1p contains a typical catalytic protein kinase domain (positions 41–293), which is also present in other Snf1p homologues. Within this region we identified a protein kinase ATP‐binding region (positions 48–71) and a consensus Ser/Thr protein kinase active site (positions 160–172). The GenBank Accession No. for the sequenced DNA fragment is HM131845. Copyright © 2010 John Wiley & Sons, Ltd.     

A geometric approach to remote eye tracking

This paper presents a principled analysis of various combinations of image features to determine their suitability for remote eye tracking. It begins by reviewing the basic theory underlying the connection between eye image and gaze direction. Then a set of approaches is proposed based on different combinations of well-known features and their behaviour is evaluated, taking into account various additional criteria such as free head movement, and minimum hardware and calibration requirements. The paper proposes a final method based on multiple glints and the pupil centre; the method is evaluated experimentally. Future trends in eye tracking technology are also discussed.     

Effect of phase change and solute diffusion on spreading on a dissolving substrate

Dissolutive wetting is investigated numerically using a diffuse-interface model that incorporates fluid flow, solute diffusion and phase change. A range of materials parameters are investigated: (1) permitting recovery of the hydrodynamic limit by suppressing the dissolution of the substrate and (2) evaluating the role of diffusion. The time history of droplet size, droplet concentration and angles between the interfaces are given. For cases in which convection dominates, the dynamics of spreading agrees with a known hydrodynamic model for spreading of inert fluids. A phase change increases wetting speed, due to a condensation that takes place near the triple junction. There is also a strong dependence of the wetting kinetics on the solute diffusivities. Details of composition changes during spreading are also discussed, such as the composition path of the bulk liquid probed at different locations in the drop.     

Genetic algorithm-based optimization of testing and maintenance under uncertain unavailability and cost estimation: A survey of strategies for harmonizing evolution and accuracy

This paper presents the results of a survey to show the applicability of an approach based on a combination of distribution-free tolerance interval and genetic algorithms for testing and maintenance optimization of safety-related systems based on unavailability and cost estimation acting as uncertain decision criteria. Several strategies have been checked using a combination of Monte Carlo (simulation)--genetic algorithm (search-evolution). Tolerance intervals for the unavailability and cost estimation are obtained to be used by the genetic algorithms. Both single- and multiple-objective genetic algorithms are used. In general, it is shown that the approach is a robust, fast and powerful tool that performs very favorably in the face of noise in the output (i.e. uncertainty) and it is able to find the optimum over a complicated, high-dimensional nonlinear space in a tiny fraction of the time required for enumeration of the decision space. This approach reduces the computational effort by means of providing appropriate balance between accuracy of simulation and evolution; however, negative effects are also shown when a not well-balanced accuracy-evolution couple is used, which can be avoided or mitigated with the use of a single-objective genetic algorithm or the use of a multiple-objective genetic algorithm with additional statistical information.     

Autoclaving effects on the dietary fibre content of carrots (Daucus carota) and turnips (Brassica napus): an evaluation of different methods

Different methods have been used to evaluate variations in the dietary fibre content of carrots and turnips during autoclaving. Autoclaving was carried out at 121°C under pressure for 15 min. The methods used were the gravimetric (neutral and acid detergent fibre) method, the enzymatic-gravimetric method for (insoluble and soluble fibre and the spectrophotometric method for pectic substances. When the methodologies were compared it was observed that in raw carrots and turnips, the neutral detergent fibre and insoluble fibre contents were statistically different (P<0.05). This was not the case for processed samples of the vegetables. The correlation between the different methodologies was studied. A good correlation was found between neutral detergent fibre and insoluble fibre in raw turnips (r = 0.999). Variance analysis indicated that quantitative variations resulting after thermal treatment were statistically significant (P<0.05) for neutral detergent fibre in carrots (raw = 1.97%, processed = 1.68%), and for pectic substances in carrots (raw = 0.54%, processed = 0.47%) and turnips (raw = 0.33%, processed = 0.25%). Optical microscopy has been used to identify different dietary fibre components in raw and processed samples.     

Mobile Design as Neighborhood Acupuncture: Activating the Storytelling Networks of South Los Angeles

Abstract

A delicate touch is required to empower neighborhoods using civic media. Funding is persistently scarce. Especially in marginalized neighborhoods, blunt designs can be counterproductive and even entrench complex problems. New metaphors may be needed to guide design and empower local neighborhoods. Urban acupuncture is used as the basis for this study, emphasizing a light-touch strategy that has shown success in Brazil with urban transit, and more recently in Europe with urban design. We specifically propose “neighborhood acupuncture” to address the local level, tapping the sociology of place-based communication. To investigate the implications for systematic design, a case study is probed in South Los Angeles using mobile media for community mapping. Using qualitative methods, three tactics were investigated for the potential to “poke” the network into action, including one to bridge diverse storytelling networks. Each tactic ultimately seeks to build the capacity for collective action around neighborhood issues. Acupuncture is broadly argued to sustain two design shifts: first to help approach neighborhoods as ecosystems, and second, to design for circulation rather than any single technology platform.     

Technical–economic evaluation of a small-scale model plant for the manufacture of pine glue laminated timber

A small-scale glue laminated timber (GLT) model plant, capable of producing an average of 880 linear m of lamellas per day, approximately 1500 m³/year, located in Castilla y León, Spain, was technically and economically evaluated. The production of such plant is aimed at substituting imports of GLT manufactured from spruce in Central Europe. The total investment considered for this theoretical operation was 455 k€. The raw material proposed was Pinus sylvestris classified according to UNE 56544 as ME-2. The external lamellas were defined as ME-1, upgraded from ME-2 by the removal of knots and deformations, which gives an average block length of 1825 and 3800 mm for external and internal lamellas, respectively. The effective stiffness of such configuration was modeled, rendering beams that could be assigned to class resistance GL24. Production costs were 770 k€, 52% of which were timber as raw material. The volume of production is affected by the combination of products manufactured; therefore, this variable was presented as a function of economic result, defining zones of product-mix that would be economically unfeasible, feasible with reservations, and feasible. The products to be manufactured were straight beams, 6-m long, of 9 different cross-sections, varying from 80?×?120 mm² to 200?×?600 mm². Additionally, production volume, wood cost, and block length are identified as critical parameters for the sensitivity analysis of the plant. Considering a wood cost for ME-2 of 220 €/m³, the plant must operate at 70% of its capacity to be economically feasible. The economic result of the operation increases proportionally to block length. The plant generates an EBIT of 51 k€, PNV of 415 k€ (discount rate of 4%), and an IRR of 19%.