Silver Electrodeposition from Photographic Processing Solutions

This paper describes the parameters that are important in the industrial practice of silver removal from photographic fixers. The experiments were performed under potentiostatic control using synthetic solutions. The current efficiency was analysed as a function of the cathodic potential taking into account the deposit quality. A cathodic potential of ?0.5 V against a saturated calomel electrode is recommended. The conditions to prevent the darkening of the electrodeposit were investigated. The determination of silver concentration in the solution was made by direct potentiometry. The results obtained with synthetic fixers were corroborated by making the silver deposition from commercial fixers in an electrochemical reactor with rotating cylinder electrode intercalated in an electrolytic flow circuit in order to simulate practical conditions.     

Epoxide polymerization

Summary Poly(propylene oxide), PPO, obtained using diphenylzinc, Ph₂Zn, and using the diphenylzinc-water system at various molar ratios H₂O/Ph₂Zn, were studied through ¹H NMR and IR spectroscopy establishing that the polymerization initiates by coordition of propylene oxide (PO) to a terminal zinc atom of the active species followed by consecutive insertions of PO units at this zinc atom. The PPO obtained showed Ph-and HO-, HO-and HO-end-groups depending on the molar ratio H₂O/Ph²Zn used, and also HO-and PhO-end-groups when oxygen was present in the polymerization system.     

A Study of Ozone Generation by Negative Corona Discharge Through Different Plasma Chemistry Models

The Steady radial distribution of chemical species in a wire‐to‐cylinder ozone generator filled with pure oxygen has been computed by applying four different plasma chemistry models of increasing complexity. The most complete model considers ten species (e, O₂ ⁺, O₂ ^?, O₃ ^?, O^?, O₂, O₂(¹Δ_g), O₂(¹∑_g ⁺), O and O₃) and 79 reactions, including ionization by electron impact, electron attachment and detachment, electron-ion recombination, charge transfer, etc. The chemical model is coupled with the electrical model through Poisson's equation. The spatially averaged ozone density has been computed as a function of the current intensity and compared with the experimental values obtained by UV spectroscopy.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

Inhibition of sulfide on the simultaneous removal of nitrate and p‐cresol by a denitrifying sludge

BACKGROUND: Many industrial discharges, such as those generated from petrochemical refineries, contain large amounts of sulfurous, nitrogenous and organic contaminants. Denitrification has emerged as a suitable technology for the simultaneous removal of these pollutants in a single reactor unit; however, more evidence is demanded to clarify the limitations of denitrification on the simultaneous removal of sulfide and phenolic contaminants and to optimize the biological process. The aim of this study was to evaluate the capacity of a denitrifying sludge to simultaneously convert sulfide and p‐cresol via denitrification. RESULTS: Sulfide was the preferred electron donor over p‐cresol, imposing a 5 h lag phase (required for complete sulfide removal) on organotrophic denitrification. Addition of sulfide (20 mg S^2? L^?1) to p‐cresol‐amended denitrifying cultures also decreased the reduction rate of nitrate and nitrite, as well as the production rate of nitrogen gas. Nitrite reduction rate was the most affected step by sulfide, decreasing from 35 to 21 mg N (g VSS d)^?1. A synergistic inhibitory effect of nitrate and sulfide was also observed on nitrite reduction. Despite the effects of sulfide on the respiratory rates monitored, complete removal of nitrate, sulfide and p‐cresol could be achieved after 48 h of incubation. CONCLUSION: Our results suggest that simultaneous removal of sulfide and p‐cresol could be achieved in denitrifying reactors, but a large hydraulic residence time may be required to sustain an efficient process due to inhibitory effects of sulfide. Copyright © 2008 Society of Chemical Industry     

Mapping of Trellises Associated with General Encoders onto High-Performance VLSI Architectures

A rate 1/n binary generic convolutional encoder is a shift-register circuit where the inputs are information bits and the outputs are blocks of n bits generated as linear combinations on the appropriate shift register contents. The decoding of the outputs of a convolutional encoder can be carried out by the well-known Viterbi algorithm. The communication pattern of the Viterbi Algorithm is given as a graph, called trellis, associated to the state diagram of the corresponding encoder. In this paper we present a methodology that permits the efficient mapping of the Viterbi algorithm onto a column of an arbitrary number of processors. This is done through the representation of the data flow by using mathematical operators which present an inmediate hardware projection. A single operator string has been obtained to represent a generic encoder through the study of the data flow of free-forward encoders and feed-back encoders. The formal model developed is employed for the partitioning of the computations among an arbitrary number of processors in such a way that the data are recirculated opimizing the use of the processors and the communications. As a result, we obtain a highly regular and modular architecture suitable for VLSI implementation.     

Algorithms for processing the group K nearest-neighbor query on distributed frameworks

Distributed and Parallel Databases - Given two datasets of points (called Query and Training), the Group (K) Nearest-Neighbor (GKNN) query retrieves (K) points of the Training with the smallest sum...     

Does maintainability relate to the energy consumption of software? A case study

Software Quality Journal - Energy consumption of software has been becoming increasingly significant, since it can vary according to how the software has been developed. In recent years, developers...     

A system-on-chip development of a neuro-fuzzy embedded agent for ambient-intelligence environments

This paper presents the development of a neuro-fuzzy agent for ambient-intelligence environments. The agent has been implemented as a system-on-chip (SoC) on a reconfigurable device, i.e., a field-programmable gate array. It is a hardware/software (HW/SW) architecture developed around a MicroBlaze processor (SW partition) and a set of parallel intellectual property cores for neuro-fuzzy modeling (HW partition). The SoC is an autonomous electronic device able to perform real-time control of the environment in a personalized and adaptive way, anticipating the desires and needs of its inhabitants. The scheme used to model the intelligent agent is a particular class of an adaptive neuro-fuzzy inference system with piecewise multilinear behavior. The main characteristics of our model are computational efficiency, scalability, and universal approximation capability. Several online experiments have been performed with data obtained in a real ubiquitous computing environment test bed. Results obtained show that the SoC is able to provide high-performance control and adaptation in a life-long mode while retaining the modeling capabilities of similar agent-based approaches implemented on larger computing machines.     

Flavonoids of “La Alcarria” honey A study of their botanical origin

Summary The flavonoids present in ten selected samples of La Alcarria honey with different pollen compositions have been HPLC analysed in order to establish if correlations between botanical origin and flavonoid profiles are possible. A common flavonoid pattern is observed in the different samples showing that pollen is not the main source of honey flavonoids. A close correlation between the flavonoid patterns of honey flavonoids and propolis flavonoids has been found suggesting that flavonoid analysis could be more useful in geographical origin determinations than in botanical origin studies.

---

Flavonoide des La-Alcarria-Honigs Eine Studie ihres botanischen Ursprungs

Zusammenfassung Die Flavonoide in Proben in Alcarria-Honig mit unterschiedlicher Pollenzusammensetzung wurden untersucht, um Kortrelationen zwischen dem botanischen Ursprung und den möglichen Flavonoiden zu finden. In den verschiedenen Proben wurde ein Flavonoid-Muster gefunden, wobei der Pollen nicht die Hauptquelle der Honigflavonoide ist. Es wurde jedoch eine enge Korrelation zwischen den Flavonoid-Mustern des Honigs und des Bienenkittharzes gefunden, was für die geographische Herkunft wichtiger ist als die botanische.