The Barley Chloroplast Mutator (cpm) Mutant: All Roads Lead to the Msh1 Gene

The barley chloroplast mutator (cpm) is a nuclear gene mutant that induces a wide spectrum of cytoplasmically inherited chlorophyll deficiencies. Plastome instability of cpm seedlings was determined by identification of a particular landscape of polymorphisms that suggests failures in a plastome mismatch repair (MMR) protein. In Arabidopsis, MSH genes encode proteins that are in charge of mismatch repair and have anti-recombination activity. In this work, barley homologs of these genes were identified, and their sequences were analyzed in control and cpm mutant seedlings. A substitution, leading to a premature stop codon and a truncated MSH1 protein, was identified in the Msh1 gene of cpm plants. The relationship between this mutation and the presence of chlorophyll deficiencies was established in progenies from crosses and backcrosses. These results strongly suggest that the mutation identified in the Msh1 gene of the cpm mutant is responsible for the observed plastome instabilities. Interestingly, comparison of mutant phenotypes and molecular changes induced by the barley cpm mutant with those of Arabidopsis MSH1 mutants revealed marked differences.     

On the Acetylation of Phenanthrene and 9-chlorophenanthrene

Friedel-Crafts acetylation of phenanthrene ( 1a ) in sym-tetrachloroethane yields mixtures of 2-, 3- and 9-acetylphenanthrenes ( 2a, 3a, 4 ). The distribution of isomers is found to depend strongly upon the method of mixing the reagents. Acetylation of 9-chlorophenanthrene ( 1b ), performed by a variety of methods and solvents, led mainly to 3-acetyl-9-chlorophenanthrene ( 3b ) (≥85%). Previously unreported 2-acetyl-9-chlorophenanthrene ( 2b ) was found to form up to a maximum 11% in nitrobenzene.     

Microscopic diagnosis of the leaf and stem of Piper solmsianum C.DC

Piper solmsianum C.DC., which is popularly known as pariparoba, is a shrub that measures 1–3 m in height and it inhabits areas with wet tropical soils. The objective of this study was to analyze the leaf and stem anatomy using light microscopy, scanning electron micrographs, and energy‐dispersive X‐ray spectroscopy in order to provide information for species identification. The anatomical profile showed the following main microscopic markers: hypostomatic leaf; hypodermis layer on both sides; pearl glands; biconvex midrib shape; five collateral vascular bundles in open arc with the central bundle larger than the others; circular stem shape; collateral vascular bundles arranged in two rings; sinuous sclerenchymatic sheath in the pith; secretory idioblasts; and starch grains in the mesophyll, in the ground parenchyma of the midrib, petiole, and in the stem; and six morphotypes of calcium oxalate crystals (styloids, cuneiform, tabular crystal rosettes, cuneiform crystal rosettes, elongated square dipyramids, as well as very elongated square dipyramids).     

Novel Tacrine‐Grafted Ugi Adducts as Multipotent Anti‐Alzheimer Drugs: A Synthetic Renewal in Tacrine–Ferulic Acid Hybrids

Herein we describe the design, multicomponent synthesis, and biological, molecular modeling and ADMET studies, as well as in vitro PAMPA‐blood–brain barrier (BBB) analysis of new tacrine–ferulic acid hybrids (TFAHs). We identified (E)‐3‐(hydroxy‐3‐methoxyphenyl)‐N‐{8[(7‐methoxy‐1,2,3,4‐tetrahydroacridin‐9‐yl)amino]octyl}‐N‐[2‐(naphthalen‐2‐ylamino)2‐oxoethyl]acrylamide (TFAH 10 n ) as a particularly interesting multipotent compound that shows moderate and completely selective inhibition of human butyrylcholinesterase (IC₅₀=68.2 nM ), strong antioxidant activity (4.29 equiv trolox in an oxygen radical absorbance capacity (ORAC) assay), and good β‐amyloid (Aβ) anti‐aggregation properties (65.6 % at 1:1 ratio); moreover, it is able to permeate central nervous system (CNS) tissues, as determined by PAMPA‐BBB assay. Notably, even when tested at very high concentrations, TFAH 10 n easily surpasses the other TFAHs in hepatotoxicity profiling (59.4 % cell viability at 1000 μM ), affording good neuroprotection against toxic insults such as Aβ_1–40, Aβ_1–42, H₂O₂, and oligomycin A/rotenone on SH‐SY5Y cells, at 1 μM . The results reported herein support the development of new multipotent TFAH derivatives as potential drugs for the treatment of Alzheimer′s disease.     

Potent,Metabolically Stable 2‐Alkyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐adenines as Adenosine A2A Receptor Ligands

Inhibition of adenosine A_2A receptors has been shown to elicit a therapeutic response in preclinical animal models of Parkinson’s disease (PD). We previously identified the triazolo‐9H‐purine, ST1535, as a potent A_2AR antagonist. Studies revealed that ST1535 is extensively hydroxylated at the ω‐1 position of the butyl side chain. Here, we describe the synthesis and evaluation of derivatives in which the ω‐1 position has been substituted (F, Me, OH) in order to block metabolism. The stability of the compounds was evaluated in human liver microsomes (HLM), and the affinity for A_2AR was determined. Two compounds, (2‐(3,3‐dimethylbutyl)‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐6‐amine ( 3 b ) and 4‐(6‐amino‐9‐methyl‐8‐(2H‐1,2,3‐triazol‐2‐yl)‐9H‐purin‐2‐yl)‐2‐methylbutan‐2‐ol ( 3 c ), exhibited good affinity against A_2AR (K_i=0.4 nM and 2 nM , respectively) and high in vitro metabolic stability (89.5 % and 95.3 % recovery, respectively, after incubation with HLM for two hours).     

Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

Effect of finishing and ageing time on quality attributes of loin from the meat of Holstein–Fresian cull cows

The effects of finishing time, (T0 = 0, T1 = 30 and T2 = 60 days), on Holstein–Friesian cull cows (n = 18) and post-mortem ageing, (1, 7, 14, 21, 35 and 42 days), under vacuum conditions of Longissimus thoracis (LT) muscles were investigated. The objective of this research was to study how finishing feeding (based on a commercial concentrate and corn silage), following a pasture period of 90 days, affected carcass and meat quality. Ageing time effect was also evaluated on the main quality attribute of added value pieces, such as “striploin of ox” from cull cows. Finishing treatment affected intramuscular fat content (IMF), moisture percentage, water-holding capacity (WHC), colour parameters and shear force of meat at 24 h post-mortem, whereas ageing time enhanced meat tenderness, when this was measured by two textural tests, Warner–Braztler (WB) and textural profile analysis (TPA). A minimum shear force was achieved at 7 and 14 days of ageing for T1 and T2, respectively. No differences (P > 0.05) could be found in colour parameters from 7 to 42 days. The results show that a finishing time of two months is very beneficial, due to the increase in meat fatness, improved overall carcass quality and luminosity (L*). Furthermore, 14 ageing days were sufficient to improved tenderness. Ageing time did not have an effect on lipid oxidation (P > 0.05) and this leads us to conclude that meat shelf life exceeded 42 days under vacuum conditions’.     

The influence of nitrogen incorporation on the optical properties of anodic Ta2O5

Anodic oxides were grown on sputter-deposited Ta in different aqueous solutions. A photoelectrochemical investigation was performed in order to estimate the band gap of the films as a function of the anodizing bath composition and formation voltage, i.e. thickness. Photoelectrochemical results provided evidence of sub-band gap photocurrent for films formed in a bath containing ammonium ions at pH 9. Elemental depth profiles obtained by glow discharge optical emission spectroscopy revealed the presence of nitrogen species in the outer part of the anodic films, which is bonded to Ta according to XPS analysis. A mechanism of nitrogen incorporation is proposed in order to account for the pH dependence of film composition.     

Studies on the Susceptibility of Granular Cassava and Corn Starches to Enzymatic Attack. Part 2: Study of the Granular Structure of Starch

The starch granules remaining after enzymatic hydrolysis were analyzed. Enzymatic corrosion efficiency was related to granule diameter. The intrinsic viscosity of enzymatically treated cassava and corn starches was gradually lowered by hydrolysis. X-ray analysis and observation under a polarizing microscope suggested that enzymatic corrosion must occur in amorphous areas of the granules. Scanning electron microscopy showed that, for cassava granules, enzymatic corrosion occured mainly at the surface. Corn starch granules displayed considerable surface corrosion, as well as deep radial corrosion channels.     

Silicon planar technology for single-photon optical detectors

Design and fabrication of single photon avalanche detector (SPAD) in planar technology is reported. Device design and critical issues in the technology are discussed. Experimental test procedures are described for dark-counting rate, afterpulsing probability, photon timing resolution, and quantum detection efficiency. Low-noise detectors are obtained, with dark counting rates down to 10 c/s for devices with 10 /spl mu/m diameter, down to 1 kc/s for 50 /spl mu/m diameter. The technology is suitable for monolithic integration of SPAD detectors and associated circuits.