TEM of Dislocations in AIN

Sintered AIN specimens were deformed by Vickers hardness (HV) indentations. Compared with Al₂O₃ the HV hardness values indicate a much higher plasticity of AIN at room temperature, but above 600°C a higher ductility for Al₂O₃. Deformed AIN specimens were examined by transmission electron microscopy. Basal and prismatic glide with the slip systems (0001) 〈1120〉 and {1 1 00}〈11 2 0〉 were frequently observed. This results in four linearly independent slip systems. The critical resolved shear stress for single prismatic slip seems to be even smaller than for basal slip. However, thermally activated dislocation reactions are frozen up to at least 1000°C. Thus, prismatic slip is suppressed as soon as more than one slip direction is activated.     

Adhesion promotion of thick fire-retardant melamine polymer dip-coatings at polyolefin surfaces by using plasma polymers

Melamine and melamine resins are widely used as fire retardants for polymer materials used in pharmaceutical, plastic, textile, rubber, and construction industry. Melamine-based flame retardants act by blowing off intumescent layers, char formation, and emission of quenching ammonia gas and diluent molecular nitrogen. Special advantages are: low cost, low smoke density and toxicity, low corrosive activity, safe handling, and environmental friendliness. Methylated poly(melamine-co-formaldehyde) (mPMF) was used as thick (≥40?μm) fire-retardant coating for plasma pretreated polymers. A combined low-pressure plasma pretreatment consisting of oxygen plasma exposure followed by deposition of thin poly(allylamine) (ppAAm) and poly(allyl alcohol) (ppAAl) plasma polymers as adhesion promoters have improved the adhesion of thick mPMF coatings strongly. Chemical structure and composition of deposited polymer films were characterized by infrared-attenuated total reflectance and X-ray photoelectron spectroscopy (XPS). After peeling, the peeled layer surfaces were also investigated for identification of the locus of failure and their topography using optical microscopy and XPS. Often the adhesion promotion was so efficient that the peeling of coating was not possible. Thermal properties of plasma polymers and dip-coating films were analyzed by thermogravimetric analysis. Significant improvement of fire-retardant properties of coated polymers was confirmed by flame tests.     

Layer‐by‐layer assembled polyelectrolyte blend membranes and their use for ion separation and rejection

Polyelectrolyte blend films and membranes were prepared upon alternating electrostatic adsorption of polyallylamine hydrochloride (PAH) and mixtures of polystyrene sulfonate (PSS) and polyacrylic acid (PAA) in different ratio on solid supports. Infrared studies indicated that the PSS‐PAA blend composition of the films always differed from the mixture composition in the dipping solution, PSS being preferentially adsorbed. Films deposited on porous supporting membranes (polyacrylonitrile/polyethylene terephthalate) were studied on their ion permeation under diffusion dialysis conditions, and their flux and salt rejection under nanofiltration and reverse osmosis (RO) conditions. Blend membranes prepared at pH 1.7 exhibit a significantly improved anion separation and salt rejection, the ideal separation factor α(NaCl/Na₂SO₄) of a membrane prepared from a PSS:PAA mixture of 1:1 (w/w) being 197 ± 10 (pure PAH/PSS: 45). The NaCl and Na₂SO₄ rejections under RO conditions are 85 and 97% (pure PAH/PSS: 15 and 27%), respectively. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Drag reduction by DNA-grafting for single microspheres in a dilute λ-DNA solution

The fluid resistance of single micrometre-sized blank and DNA-grafted polystyrene microspheres under shear flow is compared in purified water and dilute λ-DNA solutions by means of optical tweezers experiments with a high spatial (±4 nm) and temporal (±0.2 ms) resolution. The measurement results show that the drag experienced by a colloid in a dilute λ-DNA solution (molecular weight of 48,502 bp per molecule, radius of gyration of 0.5 μm) is significantly decreased if the microsphere bears a grafted DNA brush. This newly discovered drag reduction effect is studied for different parameters, comprising the molecular weight of the grafted DNA molecules (250 bp, 1000 bp and 4000 bp), the concentration of the λ-DNA solution (11, 17 and 23 μg ml^?1, all being significantly smaller than the critical entanglement concentration c¹), the microsphere core diameter (2 μm, 3 μm and 6 μm) as well as the flow speed of the medium (10–50 μm s^?1). The maximum extent of the drag reduction is found to amount to (60 ± 20)% compared to the λ-DNA-induced contribution on the drag acting on blank colloids. We propose a theoretical explanation of this effect based on the combination of the dynamic density functional theory of Rauscher and co-workers [Rauscher M. J. Phys.: Condens. Matter 2010;22:364109] and the stagnation length theory of polymer brushes, as it was established by Kim, Lobaskin et al. [Kim et al. Macromolecules 2008;42(10):3650–3655]. In particular, the solution of the Stokes equation (i.e., the Navier–Stokes equation for creeping flow) for the studied system yields a numerical prediction that is found to be in full accord with our experimental results within measurement uncertainty.     

Complexing agent assisted synthesis of high aspect ratio Fe3 +/Mg2 + layered double hydroxides

A new, facile synthesis for Fe^3 +/Mg^2 + LDHs is developed and investigated. The crucial feature of the synthesis is the usage of a complexing agent (diethylenetriamine, DETA) to increase the solubility of iron phases precipitated intermediately. The influences of different synthesis parameter like DETA concentration, pH value, and temperature are investigated. The optimized synthesis route yields high aspect ratio Fe^3 +/Mg^2 + LDHs which are expected to be interesting filler materials for flame retardant nanocomposites.     

The effective hydrodynamic radius of single DNA-grafted colloids as measured by fast Brownian motion analysis

Optical tweezers accomplished with fast position detection enable one to carry out Brownian motion analysis of single DNA-grafted (grafting density: ∼1000 molecules per particle, molecular weight: 4000 bp) colloids in media of varying NaCl concentration. By that the effective hydrodynamic radius of the colloid under study is determined and found to be strongly dependent on the conformation of the grafted DNA chains. Our results compare well both with recent measurements of the pair interaction potential between DNA-grafted colloids (Kegler et al. Phys Rev Lett 2008; 100:118302) and with microfluidic studies (Gutsche et al. Microfluid Nanofluid 2006; 2:381-386). The observed scaling of the brush height with the ion concentration is in full accord with the theoretical predictions by Pincus, Zhulina, Birshtein and Borisov.