Indikatorenbasierte Evaluierung von Fischhabitaten in alpinen Fließgewässern

The EU Water Framework Directive commits member states to achieve good ecological status in all waterbodies. Artificial or heavily modified waterbodies must reach at least its good ecological potential. In view of these requirements, simple and feasible methods are required in order to evaluate habitat suitability for relevant target species in larger river reaches. Well-developed models for determining the relationship between stream flows and habitat for target species mainly based on micro- and meso-scale already exist. However, the application of such models is complex and time-consuming and consequently limited to relatively short river segments. The objective of this study is to develop a simplified applicable assessment model to evaluate habitat conditions for selected target fish. This model uses hydro-morphological indicators for the habitat assessment and relies on correlative relations between habitat suitability and hydro-morphological features of river stretches (average Froude-number, relative flow width, mean bed slope, relative water depth and flow velocity). The indicators were determined as reach-related averages, derived from 2D model simulations (hydraulic and habitat-specific). Particular emphasis was laid on using a wide range of river stretches with different hydro-morphological characteristics (hydrology, bed substratum, bed structures, degree of braiding, sinuosity of the river course, mean bed width and bed slope). As a result, a set of model equations enables the evaluation of fish habitat conditions in river stretches as a function of flow and morphology. The habitat suitability assessment focuses on four preselected target species: brown trout, European grayling and for low slope rivers common nase and barbel.     

Assessment of alimentary histamine exposure of consumers in Austria and development of tolerable levels in typical foods

Although alimentary intake of histamine can cause intoxication, legal limits for histamine content in the EU, exist for certain seafish species only. The present study suggests tolerable levels for fermented sausage, fish and cheese which are based on relating the amount of histamine not expected to cause any health effects after ingestion to typically consumed amounts of food. Limits of 500 and 400 mg/kg would seem to be justifiable for fermented sausage and cheese, respectively. For fish species other than those already regulated in EU, the “m”/”M” limits of 100 and 200 mg/kg can be adopted. These limits can be met by current food technology.     

My years with Rutishauser

Vor über 40 Jahren starb am 10. November 1970 viel zu früh der Schweizer Informatik-Pionier Heinz Rutishauser, der an der ETH Zürich forschte und lehrte. F.L. Bauer erinnert sich an seinen Kollegen.     

Chemical Synthesis and Enzymatic Testing of CMP‐Sialic Acid Derivatives

The cycloSal approach has been used in the past for the synthesis of a range of phosphorylated bioconjugates. In those reports, cycloSal nucleotides were allowed to react with different phosphate nucleophiles. With glycopyranosyl phosphates as nucleophiles, diphosphate‐linked sugar nucleotides were formed. Here, cycloSal‐nucleotides were used to prepare monophosphate‐linked sugar nucleotides successfully in high anomeric purity and high chemical yield. The method was successfully used for the synthesis of three nucleotide glycopyranoses as model compounds. The method was then applied to the syntheses of CMP‐N‐acetyl‐neuraminic acids (CMP‐Neu5NAc) and of four derivatives with different modifications at their amino functions (N‐propanoyl, N‐butanoyl, N‐pentanoyl and N‐cyclopropylcarbonyl). The compounds were used for initial enzymatic studies with a bacterial polysialyltransferase (polyST). Surprisingly, the enzyme showed marked differences in terms of utilisation of the four derivatives. The N‐propanoyl, N‐butanoyl, and N‐pentanoyl derivatives were efficiently used in a first transfer with a fluorescently labelled trisialo‐acceptor. However, elongation of the resulting tetrasialo‐acceptors worsened progressively with the size of the N‐acyl chain. The N‐pentanoyl derivative allowed a single transfer, leading to a capped tetramer. The N‐cyclopropylcarbonyl derivative was not transferred.     

On-machine wire electrical discharge dressing (WEDD) of metal-bonded grinding wheels

Traditional multivariate control charts such as Hotelling’s χ ² and T ² control charts are designed to monitor vectors of variable quality characteristics. However, in certain situations, data are expressed in linguistic terms and, under these circumstances, variable or attribute multivariate control charts are not suitable choices for monitoring purposes. Fuzzy multivariate control charts such as fuzzy Hotelling’s T ² could be considered as efficient tools to overcome the problems of linguistic observations. The purpose of this paper is to develop a fuzzy multivariate exponentially weighted moving average (F-MEWMA) control chart. In this paper, multivariate statistical quality control and fuzzy set theory are combined to develop the proposed method. Fuzzy sets and fuzzy logic are powerful mathematical tools for modeling uncertain systems in industry, nature, and humanity. Through a numerical example, the performance of the proposed control chart was compared to the fuzzy Hotelling’s T ² control chart. Results indicate uniformly superior performance of the F-MEWMA control chart over Hotelling’s T ² control chart.     

Spiral-CT-based assessment of tracheal stenoses using 3-D-skeletonization

PURPOSE: Demonstration of a technique for three-dimensional (3-D) assessment of tracheal-stenoses, regarding site, length and degree, based on spiral computed tomography (S-CT). PATIENTS AND METHODS: S-CT scanning and automated segmentation of the laryngo-tracheal tract (LTT) was followed by the extraction of the LTT medial axis using a skeletonization algorithm. Orthogonal to the medial axis the LTT 3-D cross-sectional profile was computed and presented as line charts, where degree and length was obtained. Values for both parameters were compared between 36 patients and 18 normal controls separately. Accuracy and precision was derived from 17 phantom studies. RESULTS: Average degree and length of tracheal stenoses was found to be 60.5% and 4.32 cm in patients compared with minor caliber changes of 8.8% and 2.31 cm in normal controls (p < 0.0001). For the phantoms an excellent correlation between the true and computed 3-D cross-sectional profile was found (p < 0.005) and an accuracy for length and degree measurements of 2.14 mm and 2.53% respectively could be determined. The corresponding figures for the precision were found to be 0.92 mm and 2.56%. CONCLUSION: LTT 3-D cross-sectional profiles permit objective, accurate and precise assessment of LTT caliber changes. Minor LTT caliber changes can be observed even in normals and, in case of an otherwise normal S-CT study, can be regarded as artifacts.     

Finite element analysis of a polymer composite subjected to a sliding steel asperity Part I Normal fibre orientation

FE micro-models have been developed in order to determine contact, stress and strain conditions produced by a steel asperity sliding on the surface of a normally oriented fibre-reinforced polymer composite. A displacement coupling technique was introduced to model a micro-environment as part of a macro-environment and to get more realistic simulation results about the failure conditions in the composite structure, in comparison to the so far widely applied anisotropic analytical or numerical macro-models. On the basis of the results, conclusions may be drawn for the possible wear mechanisms of the fibre-reinforced polymer composite. Stress results in the vicinity of the fibers in the contact area show high shear loading of the matrix leading to the formation of stretched-out matrix wear debris. In addition, high repeated compression-tension stresses at the fibre/matrix interface near the surface can lead to fibre debonding phenomena. Considering the fibre ends in the contact region, high compression stresses at their rear edges can produce fibre cracking features. To study the wear mechanisms experimentally, a single asperity scratch test was also performed showing shear failure events of the polymer matrix, fibre/matrix debonding and fibre cracking effects, as expected from the modelling studies.     

Balance of power: dynamic thermal management for Internet data centers

Internet-based applications and their resulting multitier distributed architectures have changed the focus of design for large-scale Internet computing. Internet server applications execute in a horizontally scalable topology across hundreds or thousands of commodity servers in Internet data centers. Increasing scale and power density significantly impacts the data center's thermal properties. Effective thermal management is essential to the robustness of mission-critical applications. Internet service architectures can address multisystem resource management as well as thermal management within data centers.