Nanoimprint with thin and uniform residual layer for various pattern densities

Pattern density variation is uncomfortable for nanoimprint lithography which uses a moldable material supplied as a thin film, because the variation of pattern density causes variations of residual layer thickness reflecting on the local pattern density. To solve the problem, a new type of mold “capacity-equalized mold”, which has constant averaged depth regardless of pattern density, was fabricated and the structure of the mold was inspected. UV nanoimprint was then carried out using the mold and thickness and uniformity of the residual layer were investigated. An average thickness of 33.2 nm with a standard deviation of 3.4 nm was obtained for the mold pattern layout with a pattern density of from 0.25 to 0.75. It was found that a standard deviation of 1.2 nm was achieved for pattern density variation of from 0.33 to 0.67 by excluding artifacts.     

Plasma-tolerant structure for organic light-emitting diodes with aluminum cathodes fabricated by DC magnetron sputtering: Using a Li-doped electron transport layer

We fabricate aluminum cathodes that are almost free from plasma damage by DC magnetron sputtering for organic light-emitting diodes (OLEDs). While sputtering is widely known to have numerous advantages over conventional evaporation for mass production of devices, it can cause serious damage to organic layers. In this report, we fabricate devices that are free from plasma damage by introducing a 1%-Li-doped electron transport layer (ETL). The difference of external electroluminescence quantum efficiency between OLEDs with the structure ITO/α-NPD/ETL/Al (where ITO is indium tin oxide and α-NPD is N,N′-di(1-naphthyl)-N,N′-diphenylbenzidine) with Al cathodes deposited by conventional evaporation or sputtering is 0.1%, and their driving voltage is identical. We find that the Li-doped ETL should be thicker than 40 nm. Analysis of the depth profile of the ETL by time-of-flight secondary ion mass spectrometry indicates that considerable damage from sputtering extended to a depth of approximately 30 nm, suggesting that high-energy particles penetrated about 30 nm into the ETL.     

Decision Support for DCs Location and Distribute Range Planning: Case Study in Asia-Pacific Region

A major concern is to locate manufacturing plants and/or distribution centers to serve the needs of consumers widely and rapidly with reasonably distributive cost and flexible delivery time. The purpose of this research is to help enhance a decision support for three distribution center locations with different ranges of area in order that the distributors are able to serve appropriately the retailers in twelve large cities or capitals of the nine countries in Asia-Pacific region. The researcher applies the theory of supply chain and logistics management systems with Excel, Visual Basic and Genetic Algorithms programs to find the research results. The research results revealed that the interfaces of Excel, Visual Basic, and Genetic Algorithms programs helped decision support in distribution range selection for 3 distribution center locations. Each of which had different ranges of area for distribution with a rapidly, flexibly distributed time. However, variables resulting in a decision-making should be adjusted under certain circumstances for more reliable, specific needs.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Assemblies of Functional Peptides and Their Applications in Building Blocks for Biosensors

This feature article highlights our recent applications of functional peptide nanotubes, self‐assembled from short peptides with recognition elements, as building blocks to develop sensors. Peptide nanotubes with high aspect ratios are excellent building blocks for a directed assembly into device configurations, and their combined structures with nanometric diameters and micrometric lengths enables to bridge the “nanoworld” and the “microworld”. When the peptide‐nanotube‐based biosensors, which incorporate molecular recognition units, apply alternating current probes to detect impedance signals, the peptide nanotubes behave as excellent building blocks of the transducer for the detection of target analyes such as pathogens, cells, and heavey metal ions with high specificity. In some sensor configurations, the electric signal can be amplified by coupling them with ion‐specific mineralization via molecular recognition of peptides. In general the detection limit of peptide nanotube chips sensors is very low and the dynamic range of detection can be widened by improved device designs.     

Building maps of local apparent conductivity of the epicardium with a 2-D electrophysiological model of the heart

In this paper, we address the problem of estimating the parameters of an electrophysiological model of the heart from a set of electrical recordings. The chosen model is the reaction-diffusion model on the transmembrane potential proposed by Aliev and Panfilov. For this model of the transmembrane, we estimate a local apparent two-dimensional conductivity from a measured depolarization time distribution. First, we perform an initial adjustment including the choice of initial conditions and of a set of global parameters. We then propose a local estimation by minimizing the quadratic error between the depolarization time computed by the model and the measures. As a first step we address the problem on the epicardial surface in the case of an isotropic version of the Aliev and Panfilov model. The minimization is performed using Brent method without computing the derivative of the error. The feasibility of the approach is demonstrated on synthetic electrophysiological measurements. A proof of concept is obtained on real electrophysiological measures of normal and infarcted canine hearts.     

Ocular Effects of Exposure to 40, 75, and 95 GHz Millimeter Waves

The objective of this study was to develop a model of ocular damage induced by 40, 75, and 95 GHz continuous millimeter waves (MMW), thereby allowing assessment of the clinical course of ocular damage resulting from exposure to thermal damage-inducing MMW. This study also examined the dependence of ocular damage on incident power density. Pigmented rabbit eyes were exposed to 40, 75, and 95 GHz MMW from a spot-focus-type lens antenna. Slight ocular damage was observed 10 min after MMW exposure, including reduced cornea thickness and reduced transparency. Diffuse fluorescein staining around the pupillary area indicated corneal epithelial injury. Slit-lamp examination 1 day after MMW exposure revealed a round area of opacity, accompanied by fluorescence staining, in the central pupillary zone. Corneal edema, indicative of corneal stromal damage, peaked 1 day after MMW exposure, with thickness gradually subsiding to normal. Three days after exposure, ocular conditions had almost normalized, though corneal thickness was slightly greater than that before exposure. The 50% probability of ocular damage (DD₅₀) was in the order 40?>?95?≈?75 GHz at the same incident power densities.     

A Real-coded Genetic Algorithm Applied to Optimum Design of a Low Solidity Vaned Diffuser for Diffuser Pinup

InboductionThe requirements for high efficiency and high headhave led to a widesPread use of vaned diffuser in diffeserPumP. Usually the kinetic eneny of the flow leaving theimPeller of a diffeser PUm stage is equlvalent toWtimately 20% to 40% of the total work inPu underthe tyPical operatin conditions. If an efficient diffoserpumP is to be designed, much Of thes kinehc eneTgy mustbe recovered efficienhy The vaned thser can convertboetic energy into a static pressure rise. HoweVer thecon…     

Influence of side chain length on fluorescence intensity of ROMP-based polymeric nanoparticles and their tumor specificity in in-vivo tumor imaging

In this study, amphiphilic brush-like copolymers conjugated with short alkyl or long polymeric chains of various lengths are synthesized using ring-opening metathesis polymerization (ROMP) of substituted norbornadiene monomers followed by chemical transformations. These amphiphilic copolymers form spherical self-assemblies in aqueous media with diameters of 132-244 nm. The low critical aggregation concentration of these assemblies (2.5 × 10(-3) -1.4 × 10(-5) g/L) indicates that they are quite stable in dilute conditions. An appropriate length of polymer side chain that conjugates the polymer backbone with a hydrophobic ICG (indocyanine green) moiety enhanced the fluorescence intensities of these self-assemblies in aqueous solution as well as in tumor-bearing mice. A longer side chain conjugated with tumor targeting agents could significantly affect the tumor specificity of self-assemblies to a greater extent. The self-assemblies bearing hydrophilic tumor targeting agents, such as a glucosamine molecule and a cyclic RGD (arginine-glycine-asparatic acid) peptide, accumulated in tumor tissues with high selectivity, while those having a hydrophobic targeting agent, such as folate moieties, accumulated in tumor sites with low selectivity. The results demonstrated here unambiguously indicate that the fluorescence intensity and tumor specificity of self-assemblies are strongly affected by the length of side chains that conjugate with dyes and targeting agents.     

Characterization and fracture behavior of bismuth–tin thermal fuse alloy wires produced by the Ohno continuous casting process

Bismuth–tin binary alloys containing high bismuth concentrations of 40 to 77% were continuously cast into wires of approximately 2 mm in diameter with casting speeds between 15 and 150 mm min^?1 using the Ohno Continuous Casting (OCC) process. The microstructure was examined and tensile tests were performed for wires cast at various speeds. It was found that for slowly cast wires containing large primary bismuth dendrites, bismuth fracture occurring along the (111) plane exerted a key role in wire fracture, while microstructures with refined bismuth dendrites exhibited a mixture of bismuth cracks and inter-phase decohesion, allowing the accommodation of larger strain before wire fracture. For wires with microstructures containing primary tin dendrites, inter-phase decohesion played a key role in wire fracture.