Coding approaches to fault tolerance in linear dynamic systems

This paper discusses fault tolerance in discrete-time dynamic systems, such as finite-state controllers or computer simulations, with focus on the use of coding techniques to efficiently provide fault tolerance to linear finite-state machines (LFSMs). Unlike traditional fault tolerance schemes, which rely heavily-particularly for dynamic systems operating over extended time horizons-on the assumption that the error-correcting mechanism is fault free, we are interested in the case when all components of the implementation are fault prone. The paper starts with a paradigmatic fault tolerance scheme that systematically adds redundancy into a discrete-time dynamic system in a way that achieves tolerance to transient faults in both the state transition and the error-correcting mechanisms. By combining this methodology with low-complexity error-correcting coding, we then obtain an efficient way of providing fault tolerance to k identical unreliable LFSMs that operate in parallel on distinct input sequences. The overall construction requires only a constant amount of redundant hardware per machine (but sufficiently large k) to achieve an arbitrarily small probability of overall failure for any prespecified (finite) time interval, leading in this way to a lower bound on the computational capacity of unreliable LFSMs.     

Effect of temperature and cyclic heating on the structure and strength of glass textolite

The article established the regularities of change of the physicomechanical characteristics and strength of glass textolites in single and repeated thermal loading. It shows that under multiple loading the intense loss of strength of the investigated materials is due to increased porosity on account of the large number of microcracks appearing in the structure. A correlation is obtained between the elastic and strength characteristics and porosity in dependence on the temperature of multiple heating which in the first approximation is described by a polynomial of second degree with respect to temperature, multiplied by the reciprocal of porosity.Translated from Problemy Prochnosti, No. 6, pp. 53–58, June, 1991.     

Comfort limits for asymmetric thermal radiation

Groups of 32 and 16 subjects of both sexes were exposed in an environmental chamber to radiant asymmetry caused by a cool wall, a warm wall, and a cool ceiling. Each subject was tested individually while seated and clothed at 0.6 clo. During each 3.5-hour experiment the subject was exposed to six radiant temperature asymmetries. He was asked whether and where he experienced any local cool or warm sensation, and whether it was felt to be uncomfortable. During the entire experiment he was kept thermally neutral by changing the air temperature according to his wishes.For cool walls, warm walls, and cool ceilings curves have been established showing the percentage of dissatisfied subjects as a function of the radiant asymmetry. Radiant asymmetry at a warm wall caused less discomfort than a cool wall. A cool ceiling caused less discomfort than a warm ceiling. Accepting that 5% of the subjects may feel uncomfortable. a radiant temperature asymmetry of 10°C is allowable at a cool wall, 23°C at a warm wall, and 14°C under a cool ceiling. A previous study showed that 4°C is allowable under a warm ceiling. Radiant asymmetry had no significant impact on the operative temperatures preferred by the subjects. No significant differences were observed between the responses of men and women exposed to radiant asymmetry.     

Relationship between structure parameters and chemical properties in some MPS3 layered phases

Cationic thermal motions in the MPS₃ have been related to substitution abilities in this layer family. They have also been correlated to the crystal field stabilization energy. These considerations explain why some MPS₃ materials may or may not undergo a low temperature substitution intercalation reaction. From interatomic distances comparisons, the bond between (PS₃) groups in the anionic (P₂S₆)^4? octahedra, is found to be easily stretched upon cation substitution. Cationic radii follows the expected variation according to their high spin configuration in octahedral sulfur environment.     

A finite elastostatic analysis of bimaterial interface cracks

A numerical method is developed to study the bimaterial interface problem in Neo-Hookean materials under plane stress conditions. Comparison is made with the analytical predictions for the asymptotic field of the problem. The range of dominance of the asymptotic solution at different load levels is established and the amplitudes of the crack-tip asymptotic field are related to the far field loading. The numerical model is extended to analyze the experiments conducted on specimens with an edge crack at the interface between two dissimilar Solithane plates that are characterized by Mooney-Rivlin material behavior.

---

Résumé On met au point une méthode numérique pour l'étude d'un problème d'interfaces entre deux matériaux néo-Hookiens sollicités en état plan de tension. On compare les résultats avec les prédictions analytiques étabiies pour un champ asymptotique. On établit la gamme dans laquelle la solution asymptotique est dominante, à différents niveaux de charge, et on met en relation l'ampleur du champ asymptotique à l'extrémité de la fissure avec celle du champ de contraintes à une certaine distance. Le modèle numérique est étendu à l'analyse d'essais sur éprouvettes comportant une fissure de bord à l'interface de deux tôles de Solithane caractérisée par un comportement de matériau de Mooney-Rivlin.