Compressional characteristics of native and pregelatinized forms of sorghum,plantain, and corn starches and the mechanical properties of their tablets

A study was made of the compressional characteristics of native and pregelatinized forms of sorghum, plantain, and corn starches and the mechanical properties of their tablets. Compressional characteristics were analyzed using density measurements and the Heckel and Kawakita plots. Pregelatinized starches exhibited more densification than native starches during die filling and at low pressures. The ranking for the mean yield pressure (Py) values for the starches was plantain < corn < sorghum, with the pregelatinized starches having lower values than the native starches. The ranking for the values of another pressure term, Pk--an inverse measure of plasticity, was corn < plantain < sorghum, but with the native starches having the lower values. For the tablets, the ranking for values of tensile strength (T) was corn > plantain > sorghum, while the ranking for the brittle fracture index (BFI) was plantain > corn > sorghum. Tablets made from pregelatinized starches had lower T and BFI values than those made from native starches. The results suggest that pregelatinization of the starches facilitated faster onset of plastic deformation but reduced the amount of plastic deformation which occurred during the compression process.     

Spatial resolution enhancement of ultrasound images using neural networks

Spatial resolution in modern ultrasound imaging systems is limited by the high cost of large aperture transducer arrays, which require a large number of transducer elements and electronic channels. A new technique to enhance the spatial resolution of pulse-echo imaging systems is presented. The method attempts to build an image that could be obtained with a transducer array aperture larger than that physically available. We consider two images of the same object obtained with two different apertures, the full aperture and a subaperture, of the same transducer. A suitable artificial neural network (ANN) is trained to reproduce the relationship between the image obtained with the transducer full aperture and the image obtained with a subaperture. The inputs of the neural network are portions of the image obtained with the subaperture (low resolution image), and the target outputs are the corresponding portions of the image produced by the full aperture (high resolution image). After the network is trained, it can produce images with almost the same resolution of the full aperture transducer, but using a reduced number of real transducer elements. All computations are carried out on envelope-detected decimated images; for this reason, the computational cost is low and the method is suitable for real-time applications. The proposed method was applied to experimental data obtained with the ultrasound synthetic aperture focusing technique (SAFT), giving quite promising results. Realtime implementation on a modern, full-digital echographic system is currently being developed.     

Analysis of general multi-channel planar waveguides

Using the planar waveguide concept in surface acoustic wave (SAW) technology is often advantageous when the modeling of transversely distributed phenomena is indispensable for an accurate design of SAW devices. This is especially true when complex multi-track structures such as transversely coupled resonator filters (TCRFs) are under consideration where, e.g., transverse velocity and stiffness profiles have to be incorporated in the device simulation. The interdigital transducers (IDTs) and the reflector gratings composing those devices behave as planar waveguides, supporting, in principle, all kinds of modes such as bound, semi-bound, and radiation modes. Therefore, to model these SAW propagation effects, we subdivide the SAW structures in transverse direction into several parallel waveguiding channels (N regions), and take, as the wave-describing quantity, a two-dimensional scalar potential function. By doing so, we obtain a complete set of orthonormal modes into which an arbitrary transverse excitation function can be expanded to study its propagation. The general mode spectrum includes a discrete spectrum of bound modes and continuous spectra of semi-bound and radiation modes. We calculate all types of modes by making use of the stack matrix technique. The present work, which arose from the requirement of creating an efficient mathematical tool for the simulation of TCRFs, provides the complete analysis of general SAW multi-channel structures.     

AM noise impact on low level phase noise measurements

The influence of the source AM noise in microwave residual phase noise experiments is investigated. The noise floor degradation problem, caused by the parasitic detection of this type of noise by an imperfectly balanced mixer, is solved thanks to a refinement of the quadrature condition. The parasitic noise contribution attributable to the AM to PM (phase modulation) conversion occurring in the device under test is minimized through the development of a dedicated microwave source featuring an AM noise level as low as -170 dBc/Hz at 10 kHz offset from a 3.5 GHz carrier     

Bacteriorhodopsin crystal growth in reduced gravity - Results under the conditions,given in CPCF on board of a space shuttle,versus the conditions,given in DCAM on board of the Space Station Mir

For the purpose of bio-electronics, bacteriorhodopsin was crystallized into two habits through liquid-liquid-diffusion, namely individual needles of up to 1.9 mm in length and needle bunch-like clusters of up to 4.9 mm in total length. In both the reduced gravity experiments performed, the morphology of the individual needles (crystal form A) had improved in terms of sharp needle edges and compact needle packing, compared to the parallel ground controls. For the long duration wide range low gravity condition in the "Diffusion-controlled Crystallization Apparatus for Microgravity (DCAM)" on Mir (STS-89 up), needle bunches on average were longer there than on the ground, while the compactness of the clusters, i.e. the average ratio of clustered length to clustered width was the reverse. Some exceptionally large individual needles were grown in DCAM. For the "Commercial Protein Crystallization Facility (CPCF)" in short duration high definition microgravity condition during a science mission of the Space Shuttle Discovery (STS-95), size and shape of the individual needles were homogeneous and superior to those of both the parallel ground controls and the results in DCAM. In CPCF, the average volume of the individual needles in suspension was increased by 50 % in microgravity compared to those in the ground control.     

In vitro response of primary rat osteoblasts to titania/hydroxyapatite coatings compared with transformed human osteoblast-like cells

The biocompatibility of titania/hydroxyapatite (TiO₂HA) composite coatings, at different ratio obtained by sol–gel process, was investigated studying the behavior of primary cultures of rat osteoblastic cells, isolated by femoral trabecular bone tissue. Moreover, the results have been compared with the response of human osteoblast-like MG63 cell line. Cytotoxicity of coatings was assessed by lactate dehydrogenase activity (LDH). The cellular behavior was analyzed by the cell proliferation (MTT test), cell morphology (SEM) and the biochemical markers evaluation of osteoblastic phenotype, such as alkaline phosphatase activity (ALP) and osteocalcin production. The results showed that TiO₂/HA coatings have no toxic effects and seemed to be a good support for cell adhesion and proliferation. Moreover, these materials allowed the differentiation of osteoblasts, stimulating the expression of alkaline phosphatase activity. The responses of the primary rat osteoblasts and human osteoblast-like MG63 cell line grown onto these coatings were similar in terms of proliferation and ALP activity. Differences were found considering the osteocalcin production. The results show that these coatings, thanks to their chemical composition and the deposition technique, are very promising for the potential orthopedic and dental applications.     

In vivo response of strontium and zinc-based ionomeric cement implants in bone

In this study the osteoconductive properties of strontium based ionomeric cements (ICs) named, LG125 and LG119, as well as zinc-based ICs, designated by LG130 and LG132, were compared. Wet ICs were surgically implanted into the femora of weaned Wistar rats for 4 weeks. To assess the percentage osseointegration the perimeter of the implant and the perimeter of bone in contact with the implant were measured using a pointer (the length of bone/implant interfacial contact). Osteoconduction was determined by taking six points at random around the perimeter of each ionomeric rod measuring the thickness of newly formed bone. The degree of osteoconduction was taken as the average thickness of new bone produced on the implant surface. It was found that osteoconduction was greatest in the strontium based IC implant LG125. From these studies it can be concluded that the composition LG125 might provide a useful purpose as a bone cement.     

Histomorphological, histomorphometrical and biomechanical analysis of ceramic bone substitutes in a weight-bearing animal model

It was the purpose of this investigation to prove the biomechanical properties, the osteoconductive capacity and the degradation rate of tricalcium phosphate ( TCP), a neutralized glass ceramics (GB9N) and a composite material (GB9N+copolymers). In a weight-bearing animal model six substitutes each were implanted in the medial tibial head of the right lower leg of adult Merino-sheep in a standardized surgical technique. After nine months the implants were harvested and prepared for histomorphological and histomorphometrical investigations (undecalcified Masson Goldner staining). For additional biomechanical testing of the specimens, non-operated bone blocks from the contralateral tibia as well as native implants served as controls. No significant differences for the maximum fracture load as well as for the yield strength were detected between harvested specimens and bone blocks from the contralateral tibia. However there were marked differences to ceramics that were not implanted. All substitutes showed osteoconduction, leading to a continuous ingrowth of new formed bone. However in the composite material soft tissue could be identified within the scaffold and there were signs of ongoing bone remodeling, nine months after implantation. The bone per tissue volume of -TCP in conjunction to new bone (=percentage of trabecular bone volume plus percentage of residual substitute) was higher than for GB9N and the composite material. Nine months after implantation the percentage of residual -TCP was 48%, it was 32% for GB9N and 28% for the composite.The intention of further studies should be to accelerate the degradation rates of substitutes and to improve biomechanical properties of implants by either modifying the chemical composition or combining materials with agents as, e.g. growth factors.     

Remodeling of fibrinogen by endothelial cells in dependence on fibronectin matrix assembly. Effect of substratum wettability

The endothelization of cardiovascular implants is desirable to improve their blood compatibility. The capacity of the endothelial cells to attach, migrate, proliferate and function on the implant surface depends on the presence of matrix proteins such as fibronectin (FN) and fibrinogen (FNG). In this study, we show that the deposition of fibrinogen into extracellular matrix-like structures by human umbilical vein endothelial cells (HUVEC) is dependent on FN matrix formation. We found further that the process of organization of both adsorbed and soluble FN and FNG is dependent on the wettability of materials since it was observed only on a hydrophilic and not on a hydrophobic model surface. ₃ integrin was involved in the process of cell attachment to adsorbed FNG, while the mechanism of FNG fibrillogenesis required the activity of the ₁ integrin. Studies of EC morphology showed the predominant peripheral organization of actin filaments and the formation of distinct leading and trailing cell edges suggesting a motile phenotype of cells when they are seeded on FNG. In summary, we concluded that adsorbed fibrinogen may enhance the motility of HUVEC and that soluble FNG requires FN matrix assembly to be organized in fibrilar structures.     

Hydroxypatite-polysaccharide granules for drug delivery

The formation of hydroxyapatite by co-precipitation from sodium alginate and sodium carboxymethylcellulose aqueous solutions with the use of dibasic calcium phosphate dihydrate and calcium hydroxide as starting reagents is studied. A technique to prepare the hydroxyapatite/polysaccharide (micro)granules is developed. An introduction of an antimicrobial Biocide 1 agent in proper amount into the granules is provided, and the behavior of the granules is evaluated.