An OFDM scheme with a half complexity

The paper deals with an OFDM (orthogonal frequency division multiplexing) system based on filter-bank architecture. The known implementation uses a DFT (discrete Fourier transform) processor and a polyphase network (PPN). Even if it is based on complex components, in the final step it operates the real part extraction of the incoming signal. This leads to redundant operations in the DFT processor and in the PPN. Specifically, for the transmission of N complex symbol sequences at a given rate ½F, an N-point DFT processor and an N-branch PPN, both working at the rate F, are required. This implementation can be improved with a complexity reduction by a factor of two. In fact, in the paper an architecture is presented based on an N-point DFT processor and N-branch PPN at the rate F, for the transmission of 2N (in place of N) complex symbol sequences at the rate ½F     

Effects of forced power transfer on high speed generator-loadsystems

A computer-aided method for investigating disturbances due to the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads is presented. The method is used to predict the system performance including the reverse voltage across the rotating bridge rectifier of the field exciter. This paper presents the fundamentals and the modeling approach used in the development of this method. In addition, the results of using this approach to compute the machine parameters under different load conditions including saturation effects due to magnetic material nonlinearities and space harmonics effects due to machine geometry and winding layouts are presented. The computed parameters are validated by comparison to test data. These parameters form the main data for simulating the forced paralleling of out of phase high speed salient pole AC generator systems feeding isolated loads. Further, the results of using this modeling approach in a case study to predict the system performance due to forced power transfer are summarized and are shown to be in good agreement with test data     

A stochastic deconvolution method to reconstruct insulin secretionrate after a glucose stimulus

Insulin secretion rate (ISR) is not directly measurable in man but it can be reconstructed from C-peptide (CP) concentration measurements by solving an input estimation problem by deconvolution. The major difficulties posed by the estimation of ISR after a glucose stimulus, e.g., during an intravenous glucose tolerance test (IVGTT), are the ill-conditioning of the problem, the nonstationary pattern of the secretion rate, and the nonuniform/infrequent sampling schedule. In this work, a nonparametric method based on the classic Phillips-Tikhonov regularization approach is presented. The problem of nonuniform/infrequent sampling is addressed by a novel formulation of the regularization method which allows the estimation of quasi time-continuous input profiles. The input estimation problem is stated into a Bayesian context, where the a priori known nonstationary characteristics of ISR after the glucose stimulus are described by a stochastic model. Deconvolution is tackled by linear minimum variance estimation, thus allowing the derivation of new statistically based regularization criteria. Finally, a Monte-Carlo strategy is implemented to assess the uncertainty of the estimated ISR arising from CP measurement error and impulse response parameters uncertainty     

Vessel wall detection and blood noise reduction in intravascularultrasound imaging

Scattering from blood limits the contrast between the vessel wall and the lumen in intravascular ultrasound imaging. This makes it difficult to localize the vessel wall, especially on still images. This paper presents a method for automatic detection of vessel walls and reduction of blood noise based on correlation of the RF-signal between adjacent frames. The ultrasound RF-signal is quadrature demodulated, digitized, stored in memory, and transferred to a computer for processing and analysis. The absolute value of the cross-correlation coefficient between two adjacent frames is used to differentiate between stationary and fluctuating signals. Models and numerical calculations presented in this work indicate that the cross-correlation coefficient obtained from a radially dilating vessel wall will be larger than 0.8 under standard 20 MHz imaging conditions. The corresponding value from blood is less than 0.2 for blood velocities exceeding 0.5 cm s^-1 . The blood-noise filter is based on detecting this difference in correlation and displays vessel wall regions with no modifications, while regions detected as blood are rejected. A simplified vessel-wall detector that is suitable for real-time implementation is proposed. The performance of this detector and the blood noise filter are demonstrated by in vitro experiments     

A dislocation shielding prediction of the toughness transition during cleavage of semibrittle crystals

An interconnected set of observations assesses current equilibrium models of the ductile-brittle-transition temperature (DBTT). This involvesin situ transmission electron microscopy (TEM) studies of crack-tip dislocations in single and polycrystals and bulk fracture toughness tests at various temperatures. Beyond K_I values of 8 MPa · m^1/2 in both iron-base single and polycrystals, large numbers of redundant dislocations are created, as postulated recently by Weertman. [38] Still, the necessary shielding dislocations, as required by equilibrium, can be detected at values as high as 20 and 40 MPa · m^1/2 byex situ TEM and electron channeling, respectively. In addition, the close approach of dislocations to the crack tip in some of the studies, as opposed to others, suggests that large dislocation free zones (DFZ) are a thin-film artifact. However, a failure criterion based partly on the Rice-Thomson model’21 is both consistent with the absence of a large DFZ and observed fracture toughness variations with test temperature. It is emphasized that this toughness transition is entirely in the semibrittle regime where cleavage is the failure mode. Nevertheless,K _lc values increase from 3 to 60 MPa·m^1/2 with an increase in test temperature. This article is based on a presentation made in the symposium “Quasi-Brittle Fracture” presented during the TMS fall meeting, Cincinnati, OH, October 21–24, 1991, under the auspices of the TMS Mechanical Metallurgy Committee and the ASM/MSD Flow and Fracture Committee.     

Molecular genetics in Saccharomyces kluyveri: The HIS3 homolog and its use as a selectable marker gene in S. kluyveri and Saccharomyces cerevisiae

We cloned the Saccharomyces kluyveri HIS3 homolog, k-HIS3, and made a partial deletion of the gene. The k-HIS3 gene complemented a HIS3 deletion in S. cerevisiae. The DNA sequences of the open reading frames (ORFs) of the HIS3 homologs are 70% identical at the DNA level and 83% identical at the deduced amino acid level. The ORF upstream of the k-HIS3 gene is related to the PET56 gene of S. cerevisiae found upstream of the HIS3 gene of S. cerevisiae. The ORF downstream from the k-HIS3 gene is not related to the DED1 gene found downstream of the HIS3 gene in S. cerevisiae.     

Measurement of the compressive creep strain rates of the individual phases within a lamellar microstructure

A fuducial line technique has been developed to determine the creep properties of the constituent phases within a lamellar composite subject to compression creep deformation. The technique can yield information on the total strain, creep rate, and the stress exponent and activation energy for creep of the individual phases within a lamellar microstructure. The contribution of interphase interfacial sliding to the strain of lamellar composites can also be evaluated by using the fiducial line technique. Application of the fiducial line analysis to a two-phase TiAl/Ti₃Al lamellar alloy deformed in compression at 1080K and 380MPa yields good agreement between the creep strain determined using the fiducial line analysis and the value directly measured from the crept specimen. The fiducial line analysis reveals that the TiAl phase within the two-phase TiAl/Ti₃Al lamellar microstructure creeps 2.2 times faster than the Ti₃Al phase and that interfacial sliding does not contribute to creep deformation of this alloy, within the resolution limit of the fiducial line experiment.     

Transport properties of oxygen-deficient YBa2Cu3O7−x thin films

We report on measurements of the in-plane resistivityρ and Hall coefficientR _H (B∥c) of various oxygen-deficient epitaxial films of YBa₂Cu₃O_7?x in the normal state. The superconducting transition temperaturesT _c of the samples vary from 14 to 90 K. Both the resistivity and the Hall coefficient exhibit a strong dependence on the oxygen content and the temperature. Asx increases,T _c decreases continuously, whileρ andR _H gradually increase in magnitude. Furthermore, also the characteristic linear dependences ofραT andR _Hα T ^?1 of the highly doped compounds changes to a nonlinear behavior for the samples withT _c lower than 60 K. The unusual doping and temperature dependence ofR _H will be compared to the predictions of our calculations, based on a two-dimensional tight-binding model using the relaxation-time approximation. The model considers also the next-nearest-neighbor hopping, which strongly influences the predicted Hall coefficient. Additionally, the cotangent of the Hall angle cot(Θ _H ) is discussed in the framework of the two-dimensional Luttinger liquid theory.