Vitamin allowance of cosmonauts during preflight training and after completing short space flights

Supply of the main and doubling crews of cosmonauts with vitamins C, A, D, E, B1, B2, B6, PP, and B12, folic acid and carotinoids was studied during training and after the completion of short-term space flights (from 4 to 13 days). As the result of the investigation conducted during the intensive training, 1 month before the space flight some cases of certain vitamins deficiency were revealed. Administration of additional vitamins during 2 weeks before the flight led to a rise in the cosmonauts' supply with vitamins. The findings obtained after the short-term space flights evidence an intensive metabolization of vitamins and increased vitamin requirements during this period.     

Nitrogen transformations and fate of other parameters in columnar denitrification

Soil columns were used as denitrifying reactors in the laboratory where the feed solutions were composed of nitrified solution and kitchen waste. Five different carbon (expressed as methanol) to nitrogen ratios ranging from 2:1 to 6:1 were applied to twenty soil columns. Transformation of nitrogen compounds and fate of associated parameters during denitrification were investigated. A high degree of denitrification was obtained for C:N ratios of 4:1 or higher. Rate of application was not a significant factor in this study. Most of the TKN present in the feed solutions escaped the denitrification reactors. Production of total alkalinity during denitrification was found to be somewhat lower than the values reported in the literature. In some cases the column effluents contained higher solids concentrations than in the influent.     

Stability of imperfect conical shells with helical reinforcement

The article explains a method of numerical calculation of the stability of imperfect conical shells with helical reinforcement under uniform external pressure. It also investigates the effect of the amplitude of local initial imperfections on the critical loads.Translated from Problemy Prochnosti, No. 12, pp. 67–69, December, 1991.     

Scientific co-operation in Europe and the citation of multinationally authored papers

Under the sponsorship of the U.S. National Science Foundation, CHI Research, Inc. developed the bibliometric indicators for the U.S. National Science Board'sScience Indicators Reports starting withScience Indicators 1972. In the work reported here, for the Commission of the European Communities, CHI has extended the Science Indicators techniques and database to a study of publication, coauthorship and citation within 28 scientific fields related to various European Community programs.Perhaps the most important finding of the research was that internationally coauthored papers — papers authored by scientists affiliated with institutions in more than one EC country — were cited two times as highly as papers authored by scientists working at a single institution within a single country. These EC-EC internationally coauthored papers were cited as highly as EC-Non EC and Non-EC papers. This indicates that the internationally linked European science is of as high impact as any other science in the world.A second key finding was that, after compensating for national scientific size, the degree of international coauthorship did not appear to be particularly dependent upon size. However, linguistic and cultural factors were found to be very strong. The patterns of coauthorship amongst the European countries are far from homogeneous, and are quite heavily affected by linguistic, historical, and cultural factors.Finally, it was found that international coauthorship is increasing steadily, both within and outside of the Community, with some evidence that international cooperation is increasing more rapidly in scientific fields that have been targeted by the Commission.This work has been sponsored by the MONITOR programme of the Commission of the European Communities.     

Effects of flux enhancing polymer on the characteristics of sludge in membrane bioreactor process.

A newly developed membrane performance enhancer (MPE) was used to prevent membrane fouling in a membrane bioreactor (MBR) process. It transpired that 1,000 mg/l of MPE reduced polysaccharide levels from 41 mg/I to 21 mg/I on average under the experimental condition. Repeated experiments also confirmed that 50-1,000 mg/l of MPE could reduce membrane fouling significantly and increase the intervals between membrane cleanings. Depending on MPE dosages and experimental conditions, trans-membrane pressure (TMP) increase was suppressed for 20-30 days, while baseline TMP surged within a few days. In addition, MPE allowed MBR operation even at 50,000 mg/l of total solid and reduced permeate COD. However, no evidence of toxicity for sludge was found from respiratory works.     

Silicon-to-steel bonding using rapid thermal annealing

This paper presents the rapid, low-temperature bonding between silicon and steel using the rapid thermal annealing process. Three different thin-film adhesion layer systems including silver, gold, and nickel were utilized as the intermediate bonding material to assist the eutectic Pb/Sn bonding between silicon and steel. The bonding temperature was set at 220/spl deg/C for 20 s, with a 20-s ramp-up time. Five experiments were conducted to determine the strength of the bond, including static tensile and compressive four-point bend tests, axial extension tests, tensile bending fatigue tests, and corrosion resistance tests. The test results have shown that the gold adhesion layer is the most robust, demonstrating minimal creep during fatigue tests, no delamination during the tensile or compressive four-point bend tests, and acceptable strength during the axial extension tests. Additionally, all adhesion layers have withstood four months of submersion in various high-temperature solutions and lubricants without failure. Simulations of the axial stresses and strains that developed during the four-point bend and axial extension tests were performed and showed that the presence of the silicon die provides a local reinforcement of the bond as observed in the experimental tests.     

InAs quantum dot photonic crystal lasers and their temperature dependence

We report on the demonstration of optically pumped photonic crystal lasers with InAs quantum dot active regions operating at room temperature near 1310 nm. Absorbed threshold pump powers as low as 25 /spl mu/W are observed. We also extract a characteristic temperature of 17 K, which is attributed to limitations caused by surface recombination.     

Equal gain combining over Nakagami-n (rice) and Nakagami-q (Hoyt) generalized fading channels

Motivated by the importance of Nakagami-n (Rice) and Nakagami-q (Hoyt) statistical models to describe channel fading in land, mobile, terrestrial, and satellite telecommunications, we present an alternative moments-based approach to the performance analysis of equal-gain combining (EGC) receivers over independent, not necessarily identically distributed Rice- and Hoyt-fading channels. Exact closed-form expressions for the moments of the signal-to-noise ratio (SNR) at the output of the combiner are derived and significant performance criteria such as, the average output SNR, the amount of fading and the spectral efficiency at the low power regime, are studied. Moreover, using Pade rational approximation to the moment-generating function of the output SNR, the average symbol error probability and the outage probability are evaluated. We also study the suitability of modeling a Hoyt-fading environment by a properly chosen Nakagami-m model, as far as the error performance of the EGC is concerned.     

Performance comparison of space-time block coded and cyclic delay diversity MC-CDMA systems

Spatial diversity is a widely applied technique for enhancing wireless system performance since it greatly reduces the detrimental effects of multipath fading. Space-time block codes have been considered the best choice for transmit diversity in narrowband environments, but their use in broadband channels is questionable due to their inability to pick up multipath diversity. However, when used in conjunction with an MC-CDMA system, they achieve not only full spatial but also variable multipath diversity depending on the employed spreading. In comparison, cyclic delay diversity is an attractive approach to achieve spatial and multipath diversity. Its simplicity and conformability with current standards makes it desirable for multicarrier systems. Previous studies suggest that CDD is only advantageous with an outer channel code for OFDM systems. In this article, we compare STBCs and CDD applied to an MC-CDMA system in terms of complexity and performance. It is shown that for an MC-CDMA system, CDD benefits from spreading and channel coding that makes it very competitive with STBCs, particularly since it is applicable to any number of transmit antennas with no loss in rate.