Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

复杂系统平均寿命的估计和性质

根据已知的基于最小路径或最小割集复杂系统可靠度函数的解析表达式,给出当子系统寿命分布服从指数分布时,系统平均寿命的表达式.利用这一表达形式,在子系统寿命变量服从指数分布条件下,分别就完全数据和截尾数据两种情况,给出了系统平均寿命的估计,并对估计性质进行了研究.并在完全数据下,给出了估计的渐近分布.     

母语意识在英汉翻译中的探讨

母语意识是翻译中的一个重要概念。树立母语意识,并且用这种意识来指导英汉翻译实践可以从一定程度上避免欧化译文,提高译文质量。     

对变压器真实油温的智能化监测

本文中作者通过FLUENT温度场解析和变压器实物温升试验,找出了变压器油温最热的真实位置,从而提出智能化监测的解决方案,为真实反映油温升提供可靠的依据.     

液力偶合器用铝合金材料的超声波检测

铝硅合金ZAlSi9Mg(代号ZL104)具有优良的力学性能,在大气和淡水中不宜腐蚀、耐磨耐热、塑性成形能力强、铸造性能和切削加工性能好、不易产生“咬死”现象,是一种优良的绿色环保材料[1],被笔者公司广泛用于液力机械产品中的涡轮、泵轮、离合器等高速运转部件,降低了经济成本,也     

时效对接触线用Cu-Ag-Cr合金性能的影响

分析了固溶温度、时效及时效前冷变形量对Cu - 0 1 %Ag - 0 1 %Cr接触线用合金性能的影响 ,结果表明 :经 870℃固溶、 40 %～ 5 0 %冷变形及 480℃× 1 5h时效处理后 ,合金可获得良好的综合性能。     

微量Ge对大气下液态Sn抗氧化性能的影响

采用观察液态Sn表面氧化行为和刮取表面氧化渣的方法,研究了微量元素Ge对液态Sn在大气和250℃条件下表面抗氧化性能的影响,并与纯Sn的氧化行为进行对比;利用X射线光电子能谱仪(XPS)、扫描电子显微镜(SEM)研究了合金表面元素的含量、价态,及合金氧化后的表面形貌.结果表明:当微量元素Ge浓度达到0.01%时(质量分数),大气下液态Sn表面具有很好的抗氧化性能,同时微量元素在液态Sn表面高度富集.XPS分析表明:表面富集的Ge以4价氧化物形式存在.静态液面氧化时,Ge在液态Sn中迅速偏析,并形成一种保护性的致密氧化膜,是提高液态Sn抗氧化性能的原因.     

探究用电检查管理中营配信息集成的重要作用

随着我国经济和科学技术的不断发展,用电检查也应从传统的实地管理模式转为自动化、信息化的管理模式。详细阐述、分析了营配信息集成在用电检查工作中的作用。     

Recover Fault Services via Complex Service-to-Node Mappings in Wireless Sensor Networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node’s perspective i.e., migrating the service of faulty node to it’s nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don’t fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level.     

用于腺苷检测的基于级联扩增核酸适体电化学传感界面的构建研究

该文报道了一种基于酶级联扩增的电化学核酸适体检测腺苷的新方法。当腺苷存在时,滚环扩增的引物通过E.coli DNA连接酶的作用与通过巯基组装在金电极上的固定探针连接。在pHi29 DNA聚合酶的作用下,滚环扩增反应进行并产生一条与环形探针完全互补的长的单链,然后将大量金纳米粒子标记的核酸探针与滚环扩增的产物杂交。该传感界面电化学行为的结果表明,通过酶级联扩增的方法提高了检测腺苷的阻抗响应灵敏度,且选择性和重现性良好。用于腺苷的检测时,其线性范围为2.0μmol/L~100μmol/L,最低检测浓度为2.0μmol/L,表明该传感界面的设计可作为一种通用方法而有望用于其它目标物的检测。