Synthesis of TaZnO thin films using combinatorial magnetron sputtering and its electrical, structural and optical properties

The structural, electrical, and optical properties of tantalium zinc oxide (TaZnO) thin films grown using combinatorial magnetron sputtering system were investigated. To explore the effects of film thickness and post annealing treatment on the properties of the films, we have fabricated TaZnO sample libraries having different thicknesses and carried out post annealing treatment. Sample libraries fabricated at room temperature showed the resistivity ranged 2.1 to approximately 7.1 x 10(-3) Omega cm, while the films post annealed at 200 degrees C under 1 mTorr exhibited the resistivity as low as 1.2 x 10(-3) Omega cm. XRD measurements revealed that the film structure was strongly depended on the film thickness, showing that the structure was changed from amorphous to polycrystalline with increasing the film thickness. Furthermore, it was found that figure of merit (0TC), which was determined by T% and Rs of the TaZnO films, showed maximum value as the films with a thickness of 230 nm was post-annealed at 200 degrees C under vacuum of 1 mTorr.     

Compact, stable 1 GHz femtosecond Er-doped fiber lasers

We demonstrate a high-repetition-rate soliton fiber laser that is based on highly doped anomalously dispersive erbium-doped fiber. By splicing an 11 mm single-mode fiber to the erbium-doped fiber, the thermal damage of the butt-coupled saturable Bragg reflector (SBR) is overcome. The laser generates 187 fs pulses at a repetition rate of 967 MHz with a measured long-term stability of more than 60 h.     

Fluorescence resonance energy transfer and anisotropy reveals both hetero- and homo-energy transfer in the pleckstrin homology-domain and the parathyroid hormone-receptor

We present a method and an apparatus of polarized fluorescence resonance energy transfer (FRET) and anisotropy imaging microscopy done in parallel for improved interpretation of the photophysical interactions. We demonstrate this apparatus to better determine the protein-protein interactions in the pleckstrin homology domain and the conformational changes in the Parathyroid Hormone Receptor, a G-protein coupled receptor, both fused to the cyan and yellow fluorescent proteins for either inter- or intramolecular FRET. In both cases, the expression levels of proteins and also background autofluorescence played a significant role in the depolarization values measured in association with FRET. The system has the sensitivity and low-noise capability of single-fluorophore detection. Using counting procedures from single-molecule methods, control experiments were performed to determine number densities of green fluorescence protein variants CFP and YFP where homo resonance energy transfer can occur. Depolarization values were also determined for flavins, a common molecule of cellular background autofluorescence. From the anisotropy measurements of donor and acceptor, the latter when directly excited or when excited by energy transfer, we find that our instrumentation and method also characterizes crucial effects from homotransfer, polarization specific photobleaching and background molecules.     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

On the sources of methane to the los angeles atmosphere

We use historical and new atmospheric trace gas observations to refine the estimated source of methane (CH(4)) emitted into California's South Coast Air Basin (the larger Los Angeles metropolitan region). Referenced to the California Air Resources Board (CARB) CO emissions inventory, total CH(4) emissions are 0.44 ± 0.15 Tg each year. To investigate the possible contribution of fossil fuel emissions, we use ambient air observations of methane (CH(4)), ethane (C(2)H(6)), and carbon monoxide (CO), together with measured C(2)H(6) to CH(4) enhancement ratios in the Los Angeles natural gas supply. The observed atmospheric C(2)H(6) to CH(4) ratio during the ARCTAS (2008) and CalNex (2010) aircraft campaigns is similar to the ratio of these gases in the natural gas supplied to the basin during both these campaigns. Thus, at the upper limit (assuming that the only major source of atmospheric C(2)H(6) is fugitive emissions from the natural gas infrastructure) these data are consistent with the attribution of most (0.39 ± 0.15 Tg yr(-1)) of the excess CH(4) in the basin to uncombusted losses from the natural gas system (approximately 2.5-6% of natural gas delivered to basin customers). However, there are other sources of C(2)H(6) in the region. In particular, emissions of C(2)H(6) (and CH(4)) from natural gas seeps as well as those associated with petroleum production, both of which are poorly known, will reduce the inferred contribution of the natural gas infrastructure to the total CH(4) emissions, potentially significantly. This study highlights both the value and challenges associated with the use of ethane as a tracer for fugitive emissions from the natural gas production and distribution system.     

Effect of rosehip (Rosa canina L.) phytochemicals on stable free radicals and human cancer cells

BACKGROUND: The commercial development of plants as sources of antioxidants that can be used to enhance the properties of foods, for nutritional purposes and preservation as well as for prevention of oxidation‐related diseases, is currently of major interest. Rosehip (Rosa canina L.) is a rich source of vitamin C and polyphenols. RESULTS: Phytochemicals in rosehip tea were separated into three fractions: Fr1 (vitamin C, 39.17 mg kg^?1), Fr2 (flavonoids, 451.05 µg kg^?1) and Fr3 (phenolic acids, 504.69 µg kg^?1). Quercetin and ellagic acid were the most abundant polyphenolic compounds. Rosehip fractions, primarily rosehip flavonoids (EC₅₀ = 49 mg L^?1), showed high antioxidant activity towards 2,2‐diphenyl‐1‐picrylhydrazyl radicals (DPPH^?). Cell growth effects of rosehip fractions were assessed in HeLa, MCF7 and HT‐29 cell lines, with the lowest IC₅₀ values being determined for rosehip flavonoids, (80.63, 248.03 and 363.95 mg L^?1 respectively). However, the vitamin C fraction did not inhibit the growth of tested tumour cells. CONCLUSION: The results of this study confirm that vitamin C and flavonoids are responsible for the antioxidant activity of rosehip tea, while only polyphenols contribute to its antiproliferative activity. Copyright © 2011 Society of Chemical Industry     

Lipid Transfer to HDL is Higher in Marathon Runners than in Sedentary Subjects,but is Acutely Inhibited During the Run

Although exercise increases HDL-cholesterol, exercise-induced changes in HDL metabolism have been little explored. Lipid transfer to HDL is essential for HDL’s role in reverse cholesterol transport. We investigated the effects of acute exhaustive exercise on lipid transfer to HDL. We compared plasma lipid, apolipoprotein and cytokine levels and in vitro transfer of four lipids from a radioactively labeled lipid donor nanoemulsion to HDL in sedentary individuals (n = 28) and in marathon runners (n = 14) at baseline, immediately after and 72 h after a marathon. While HDL-cholesterol concentrations and apo A1 levels were higher in marathon runners, LDL-cholesterol, apo B and triacylglycerol levels were similar in both groups. Transfers of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.2 (4.5–6), p = 0.001], phospholipids [21.7 (20.4–22.2) vs. 8.2 (7.7–8.9), p = 0.0001] and triacylglycerol [3.7 (3.1–4) vs. 1.3 (0.8–1.7), p = 0.0001] were higher in marathon runners, but esterified-cholesterol transfer was similar. Immediately after the marathon, LDL- and HDL-cholesterol concentrations and apo A1 levels were unchanged, but apo B and triacylglycerol levels increased. Lipid transfer of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.8 (4.9–6.6), p = 0.0001], phospholipids [21.7 (20.4–22.2) vs. 19.1 (18.6–19.3), p = 0.0001], esterified-cholesterol [3.2 (2.2–3.8) vs. 2.3 (2–2.9), p = 0.02] and triacylglycerol [3.7 (3.1–4) vs. 2.6 (2.1–2.8), p = 0.0001] to HDL were all reduced immediately after the marathon but returned to baseline 72 h later. Running a marathon increased IL-6 and TNF-α levels, but after 72 h these values returned to baseline. Lipid transfer, except esterified-cholesterol transfer, was higher in marathon runners than in sedentary individuals, but the marathon itself acutely inhibited lipid transfer. In light of these novel observations, further study is required to clarify how these metabolic changes can influence HDL composition and anti-atherogenic function.     

Effects of Kramer-shear-press-test conditions on the shear properties of beef products

Tenderness parameters of bologna, salami, and pastrami were measured by Kramer-shear tests. Three levels of sample size and crosshead speed were used. The initial yield force did not change significantly as the sample size changed. The friction between the sample and press, and the sample's stress and strain changes, were studied to explain the effect of sample size on shear properties. Peak-force distance (PD) increased proportionally to the increase in fill percentage. Peak force (PF) and initial-yield distance (IYD) increased partly as the fill percentage increased. The slope changed with the change in IYD, and break area (BA) changed proportionally to the changes in PF and PD. Recommended test conditions for bologna are 50% fill percentage at any crosshead speed; those for salami are 25% fill percentage at 150-mm/min crosshead speed; and those for pastrami are 75% fill percentage at 250-mm/min crosshead speed.