美孚油回收利用的可行性实验研究

本文针对美孚油回收液与兰炼8#油混合利用进行可行性实验研究，经过重度、粘度、可燃性等方面的实验研究，表明美孚油回收液与兰炼8#油混合可以用在电动轮上并且获得良好的效果。     

强化两相混合的超临界技术制备聚乳酸微粒

针对商品化聚乳酸微球粒径分布较宽难于适用气溶胶给药要求的不足,采用水力空化混合强化超临界流体辅助雾化技术(SAA-HCM)制备聚乳酸(PLA)超细微粒.该技术主要特点是通过在超临界流体和液相进料处引入水力空化混合器,强化两相间的混合.考察SAA-HCM过程混合器压力、温度、沉淀器温度、进料中CO2与液体溶液质量流量比和溶液质量浓度等操作参数对微粒形态和粒径分布的影响,成功制备出球形度较好,粒径分布较窄(1～3μm)的PLA微球.经X射线衍射(XRD)分析和差示扫描量热(DSC)分析显示,与原料PLA相比,微球晶型及热曲线变化不大,但结晶度下降.同时把操作参数与相行为进行关联,探讨了影响颗粒形貌的机理.对比超临界流体辅助雾化法(SAA)的实验结果表明:水力空化的引入能有效强化混合器内的两相传质,混合更好,能制备出适用于气溶胶给药要求的超细微粒.     

铸造铝合金轮毂T6热处理工艺的优化研究

研究了固溶时间、淬火停留时间及涂装烘烤工艺对A356合金铸造轮毂性能的影响规律并优化了T6热处理工艺，将淬火停留时间缩短到2h。研究表明：未涂装时优化工艺使合金抗拉强度达到240MPa，屈服强度达到181MPa。伸长率达到8％；涂装后抗拉强度达到262MPa，屈服强度达到179MPa，伸长率达到9％，接近并达到目前国内T6工艺的强度性能，超过了国内轮毂行业的强度性能标准，具有一定的生产实际意义。     

THE FLOW STRESS OF ALLOY STRUCTURAL STEELS AT HIGH TEMPERATURE AND HIGH STRAIN RATE

采用恒应变速率凸轮式压缩试验机对8种合金结构钢的流动应力进行了实验研究。其变形温度(T)、应变速率((?))及变形程度(ε％)分别为850—1150℃,5—80s~(-1)及5—69％。分析了变形温度、变形程度及应变速率对流动应力(σ)的影响。通过对变形温度影响项具有两种表达式的流动应力数学模型的非线性回归分析及比较,提出了拟合精度较高的8个合金结构钢流动应力的数学模型,并给出了数学模型的回归系数值。     

Sammi简介——基于Client/Server结构和Web结构的软件开发工具

该文介绍了一个基于Web结构和Client/Server结构的软件开发工具sammi,用于创建图型、嵌入应用程序的人机标准平台。     

Blood cell counting based on U-Net++ and YOLOv5

Clinical information about a variety of disorders is available through blood cell counting, which is usually done by manual methods. However, manual methods are complex, time-consuming and susceptible to the subjective experience of inspectors. Although many efforts have been made to develop automated blood cell counting algorithms, the complexity of blood cell distribution and the highly overlapping nature of some red blood cells (RBCs) remain significant challenges that limit the improvement of analytical accuracy. Here, we proposed an end-to-end method for blood cell counting based on deep learning. Firstly, U-Net++ was used to segment the whole blood cell image into several regions of interest (ROI), and each ROI contains only one single cell or multiple overlapping cells. Subsequently, YOLOv5 was used to detect blood cells in each ROI. Specifically, we proposed several strategies, including fine classification of RBCs, adaptive adjustment for non-maximal suppression (NMS) threshold and blood cell morphology constraints to improve the accuracy of detection. Finally, the detection outcomes for each ROI were combined and superimposed. The results show that our method can effectively address the issue of high overlap and precisely segment and detect blood cells, with a 98.18% accuracy rate for blood cell counting.     

Dual-band reflective polarization converter based on metasurface

In this paper, a dual-band and reflective polarization converter based on metasurface is proposed. Its unit cell is composed of two layers of metal plates separated by a dielectric substrate. The simulation results show that the proposed converter is able to convert x- or y-polarized incident waves into cross-polarized waves perfectly in frequency bands of 6.75—10.59 GHz and 17.78—19.61 GHz, and the polarization conversion ratio (PCR) is nearly 100%, which can also convert linearly polarized waves into circularly polarized waves at four frequencies. It can be widely used in applications of radar satellites, antenna design and telecommunication with the function of realizing polarization conversion in two bands and achieving high PCR simultaneously.     

Emotional agent based on rough set

To improve the ability of agent for handling emotions, a new architecture for emotion agent is presented, based on the traditional BDI agent model and the rough set theory. By a new emotional reasoning algorithm based on rough set, the architecture performs emotion reasoning and implements the emotion treatment. An emotional agent grid based on this architecture has been realized, experiment results show that it is efficient to transact simple emotions by emotional agents.     

单漂移聚束器的非标准聚束模式

单漂移聚束器标准聚束模式要求粒子注入能量和聚束器漂移管的几何尺寸之间必须满足严格的条件,严重地限制了可聚束粒子的种类。文章论述了采用非标准聚束模式的方法,计算不同粒子在HI-13串列加速器上实现脉冲聚束的可行性。