Gold Nanoparticles Sliding on Recyclable Nanohoodoos—Engineered for Surface‐Enhanced Raman Spectroscopy

Robust, macroscopically uniform, and highly sensitive substrates for surface‐enhanced Raman spectroscopy (SERS) are fabricated using wafer‐scale block copolymer lithography. The substrate consists of gold nanoparticles that can slide and aggregate on dense and recyclable alumina/silicon nanohoodoos. Hot‐spot engineering is conducted to maximize the SERS performance of the substrate. The substrate demonstrates remarkably large surface‐averaged SERS enhancements, greater than 10⁷ (>10⁸ in hot spots), with unrivalled macroscopic signal uniformity as characterized by a coefficient of variation of only 6% across 4 cm. After SERS analyses, the nanohoodoos can be recycled by complete removal of gold via a one‐step, simple, and robust wet etching process without compromising performance. After eight times of recycling, the substrate still exhibits identical SERS performance in comparison to a new substrate. The macroscopic uniformity combined with recyclability at conserved high performance is expected to contribute significantly on the overall competitivity of the substrates. These findings show that the gold nanoparticles sliding on recyclable nanohoodoo substrate is a very strong candidate for obtaining cost‐effective, high‐quality, and reliable SERS spectra, facilitating a wide and simple use of SERS for both laboratorial and commercial applications.     

Structural relationships between measures based on heart beat intervals: potential for improved risk assessment

Decreased left ventricular ejection fraction is the most commonly used risk factor for identification of patients at high-risk for lethal ventricular arrhythmic events. Twenty-four-hour electrocardiographic (ECG) approaches to risk stratification include: counts of ventricular premature contractions (VPCs), measures of heart rate variability (HRV), and heart rate turbulence (HRT) which has two components, turbulence onset and turbulence slope (TS). Refinement of these ECG risk stratifiers could enhance their clinical utility. We explored the structural relationships between heart rate (HR) and HRV and HRT measures. Our goal was to separate out the component of these measures due to the underlying average heart rate (HR), thus potentially reducing the variability of the measures and increasing their power to stratify risk. We proposed re-scaling tachograms of heart-beat intervals so that the re-scaled tachogram has a HR of 75 (or equivalently an average interval of 800 ms) and calculating HRV and HRT from the rescaled time series. We also explored the relationship between the number of VPCs and HRT. We showed that TS is structurally related to the number of VPCs (and hence to the length of the ECG recording). We proposed an adjusted TS that is independent of the number of VPCs. We also addressed the ability of shorter ECG recording to estimate HRV and HRT measures. We evaluated standard and rescaled HRV and HRT measures using qualifying ambulatory ECG recordings from 744 patients in the Cardiac Arrhythmia Suppression Trial. We found that measures based on the rescaled tachogram had reduced variance (20% to 40%). Correlations between measures were also substantially reduced. We also found substantial circadian effects on some, but not all HRV indices, not explained by the circadian pattern in HR and possibly pointing to additional measures for risk prediction. In conclusion, we found that adjusting for HR and the number of VPCs in heart-beat related ambulatory ECG measures has the potential to significantly improve the power of these measures to risk stratify cardiac patients.     

A Novel Buffering Technique for Aqueous Processing of Zinc Oxide Nanostructures and Interfaces,and Corresponding Improvement of Electrodeposited ZnO‐Cu2O Photovoltaics

A novel buffering method is presented to improve the stability of zinc oxide processed in aqueous solutions. By buffering the aqueous solution with a suitable quantity of sacrificial zinc species, the dissolution of functional zinc oxide structures and the formation of unwanted impurities can be prevented. The method is demonstrated for ZnO films and nanowires processed in aqueous solutions used for the selective etching of mesoporous anodic alumina templates and the electrochemical deposition of Cu₂O. In both cases, improved ZnO stability is observed with the buffering method. ZnO‐Cu₂O heterojunction solar cells (bilayer and nanowire cells) synthesized using both traditional and buffered deposition methods are characterized by impedance spectroscopy and solar simulation measurements. Buffering the Cu₂O deposition solution is found to reduce unwanted recombination at the heterojunction and improve the photovoltaic performance.     

激光技术在刚挠性HDI板的应用——微导通孔形成，图形成形，外型加工

概述了采用一个激光源能够加工刚性和挠性板的一种新型激光技术,PCB制造商可能采用最小的投资和提高生产率而进入HDI市场。     

Enhancement of Thermopower of TAGS‐85 High‐Performance Thermoelectric Material by Doping with the Rare Earth Dy

Enhancement of thermopower is achieved by doping the narrow‐band semiconductor Ag_6.52Sb_6.52Ge_36.96Te₅₀ (acronym TAGS‐85), one of the best p‐type thermoelectric materials, with 1 or 2% of the rare earth dysprosium (Dy). Evidence for the incorporation of Dy into the lattice is provided by X‐ray diffraction and increased orientation‐dependent local fields detected by ¹²⁵Te NMR spectroscopy. Since Dy has a stable electronic configuration, the enhancement cannot be attributed to 4f‐electron states formed near the Fermi level. It is likely that the enhancement is due to a small reduction in the carrier concentration, detected by ¹²⁵Te NMR spectroscopy, but mostly due to energy filtering of the carriers by potential barriers formed in the lattice by Dy, which has large both atomic size and localized magnetic moment. The interplay between the thermopower, the electrical resistivity, and the thermal conductivity of TAGS‐85 doped with Dy results in an enhancement of the power factor (PF) and the thermoelectric figure of merit (ZT) at 730 K, from PF = 28 μW cm^?1 K^?2 and ZT ≤ 1.3 in TAGS‐85 to PF = 35 μW cm^?1 K^?2 and ZT ≥ 1.5 in TAGS‐85 doped with 1 or 2% Dy for Ge. This makes TAGS‐85 doped with Dy a promising material for thermoelectric power generation.     

Transport and Mechanical Properties of High-ZT Mg2.08Si0.4−x Sn0.6Sb x Thermoelectric Materials

Mg₂(Si,Sn) compounds are promising candidate low-cost, lightweight, nontoxic thermoelectric materials made from abundant elements and are suited for power generation applications in the intermediate temperature range of 600 K to 800 K. Knowledge on the transport and mechanical properties of Mg₂(Si,Sn) compounds is essential to the design of Mg₂(Si,Sn)-based thermoelectric devices. In this work, such materials were synthesized using the molten-salt sealing method and were powder processed, followed by pulsed electric sintering densification. A set of Mg_2.08Si_0.4?x Sn_0.6Sb _x (0 ≤ x ≤ 0.072) compounds were investigated, and a peak ZT of 1.50 was obtained at 716 K in Mg_2.08Si_0.364Sn_0.6Sb_0.036. The high ZT is attributed to a high electrical conductivity in these samples, possibly caused by a magnesium deficiency in the final product. The mechanical response of the material to stresses is a function of the elastic moduli. The temperature-dependent Young’s modulus, shear modulus, bulk modulus, Poisson’s ratio, acoustic wave speeds, and acoustic Debye temperature of the undoped Mg₂(Si,Sn) compounds were measured using resonant ultrasound spectroscopy from 295 K to 603 K. In addition, the hardness and fracture toughness were measured at room temperature.     

Electrical evaluation of flip-chip package alternatives for nextgeneration microprocessors

Two styles of flip-chip packages for next-generation microprocessors were designed: a low-cost organic ball-grid-array (BGA) and a thin-film-on-ceramic land-grid array (LGA). Simultaneous switching output (SSO) noise, and core noise were measured. Although SSO was improved by a factor of two over the previous generation of packaging, core noise was still quite significant. We found that core noise is best managed by placing low-inductance capacitance close to the noise source, i.e., using on-chip capacitors, coupled planes in the package, or on-package bypass capacitors. Because of the lower impedance of its power planes, the ceramic package showed significantly better electrical performance than the organic. Addition of on-package bypass capacitors greatly narrows the gap between the two packages     

Catalytically Doped Semiconductors for Chemical Gas Sensing: Aerogel‐Like Aluminum‐Containing Zinc Oxide Materials Prepared in the Gas Phase

Atmospheric contamination with organic compounds is undesired in industry and in society because of odor nuisance or potential toxicity. Resistive gas sensors made of semiconducting metal oxides are effective in the detection of gases even at low concentration. Major drawbacks are low selectivity and missing sensitivity toward a targeted compound. Acetaldehyde is selected due to its high relevance in chemical industry and its toxic character. Considering the similarity between gas‐sensing and heterogeneous catalysis (surface reactions, activity, selectivity), it is tempting to transfer concepts. A question of importance is how doping and the resulting change in electronic properties of a metal‐oxide support with semiconducting properties alters reactivity of the surfaces and the functionality in gas‐sensing and in heterogeneous catalysis. A gas‐phase synthesis method is employed for aerogel‐like zinc oxide materials with a defined content of aluminum (n‐doping), which were then used for the assembly of gas sensors. It is shown that only Al‐doped ZnO represents an effective sensor material that is sensitive down to very low concentrations (<350 ppb). The advance in properties relates to a catalytic effect for the doped semiconductor nanomaterial.     

Measurement of acousto-optic interaction in Germanium in the far infrared

Acousto-optic interaction in a Germanium Bragg cell, which was operated as acoustic resonator, was measured at 119 μm relative to 10.6 μm. The figure of merit of the material was found to be approximately 20% higher in the far infrared. The performance of various acousto-optic materials in the far infrared is briefly discussed.     

Zur Beständigkeit beschichteter Holzspanwerkstoffe

Materials, based on, wood particles, such as particleboards and moulded wood particle materials, are mainly used in a coated state for building purposes. In our laboratories investigations have been carried out to determine the service life of these composite materials, by means of accelerated weathering method. For this purpose, different liquid or solid-coated materials were used. The tests aimed at comparing open-air weathering with a short-term weathering test, which has been developed in our laboratory, based on the so-called Xenotest method. Among the liquid coatings, those lacquers based on pigmented polyurethanes turned out to be superior to all other competing systems. Solid coatings, made of pure melamine-formaldehyde resins showed to be very resistant against weathering. 48 to 60 weeks exposure in a Xenotest weathering apparatus seem to be sufficient to simulate 10 years of open-air exposure not only for uncoated but also for coated wood particle materials.