Discrimination of isotrigon textures using the Rényi entropy of Allan variances

We present a computational algorithm for isotrigon texture discrimination. The aim of this method consists in discriminating isotrigon textures against a binary random background. The extension of the method to the problem of multitexture discrimination is considered as well. The method relies on the fact that the information content of time or space-frequency representations of signals, including images, can be readily analyzed by means of generalized entropy measures. In such a scenario, the Rényi entropy appears as an effective tool, given that Rényi measures can be used to provide information about a local neighborhood within an image. Localization is essential for comparing images on a pixel-by-pixel basis. Discrimination is performed through a local Rényi entropy measurement applied on a spatially oriented 1-D pseudo-Wigner distribution (PWD) of the test image. The PWD is normalized so that it may be interpreted as a probability distribution. Prior to the calculation of the texture's PWD, a preprocessing filtering step replaces the original texture with its localized spatially oriented Allan variances. The anisotropic structure of the textures, as revealed by the Allan variances, turns out to be crucial later to attain a high discrimination by the extraction of Rényi entropy measures. The method has been empirically evaluated with a family of isotrigon textures embedded in a binary random background. The extension to the case of multiple isotrigon mosaics has also been considered. Discrimination results are compared with other existing methods.     

Building three-dimensional images using a time-reversal chaotic cavity

The design of two-dimensional (2-D) arrays for three-dimensional (3-D) ultrasonic imaging is a major challenge in medical and nondestructive applications. Thousands of transducers are typically needed for focusing and steering in a 3-D volume. In this article, we propose a different concept allowing us to obtain electronic 3-D focusing with a small number of transducers. The basic idea is to couple a small number of transducers to a chaotic reverberating cavity with one face in contact with the body of the patient. The reverberations of the ultrasonic waves inside the cavity create at each reflection virtual transducers. The cavity acts as an ultrasonic kaleidoscope multiplying the small number of transducers and creating a much larger virtual transducer array. By exploiting time-reversal processing, it is possible to use collectively all the virtual transducers to focus a pulse everywhere in a 3-D volume. The reception process is based on a nonlinear pulse-inversion technique in order to ensure a good contrast. The feasibility of this concept for the building of 3-D images was demonstrated using a prototype relying only on 31 emission transducers and a single reception transducer.     

Short and long alteplase dwells in dysfunctional hemodialysis catheters

Background: Hemodialysis catheter dysfunction (CD) is the inability to attain adequate blood pump speeds (BPS) and is attributed to thrombus or catheter malposition; alteplase (TPA) is often given in a variety of dwell times to treat CD. The purpose of this study was to determine if TPA dwell time affects short‐ or long‐term catheter patency rates. Methods: Sixty hemodialysis (HD) patients with CD, as defined by BPS of < 250 mL/min, were randomized to receive either 1‐ or > 48‐hr (to subsequent HD run) TPA dwell. The primary outcomes were catheter patency (BPS of > 250 mL/min) at the subsequent HD run and catheter patency at 2 weeks. The secondary outcome was the time from study entry to the next catheter intervention (including subsequent TPA installation). Results: After TPA installation, a 78% overall catheter patency rate was observed at the subsequent HD run, falling to 48% patency at 2 weeks. There is no statistically significant difference between the short and long TPA dwell groups for catheter patency at the subsequent HD run (76.9% vs. 79.4%) or at 2 weeks (42.3% vs. 52.9%). Multivariate analysis demonstrates that the use of TPA on two or more previous occasions is a predictor of TPA failure both at the subsequent HD run and at 2 weeks. TPA installation achieves a median catheter function time of only 14 days, after which CD reoccurs. Conclusion: This study demonstrates that although patency for the next HD run can be achieved with either short or long TPA dwell, neither is reliable in terms of long‐term patency. Strategies that employ TPA for CD are temporary and allow a 2‐week window during which more definitive therapies for HD access should be sought.     

Capture of water-borne colloids in granular beds using external electric fields: improving removal of Cryptosporidium parvum

Suboptimal coagulation in water treatment plants often results in reduced removal efficiency of Cryptosporidium parvum oocysts by several orders of magnitude (J. AWWA 94(6) (2002) 97, J. AWWA 93(12) (2001) 64). The effect of external electric field on removal of C. parvum oocysts in packed granular beds was studied experimentally. A cylindrical configuration of electrodes, with granular media in the annular space was used. A negative DC potential was applied to the central electrode. No coagulants or flocculants were used and filtration was performed with and without application of an electric field to obtain improvement in removal efficiency. Results indicate that removal of C. parvum increased from 10% to 70% due to application of field in fine sand media and from 30% to 96% in MAGCHEM media. All other test particles (Kaolin and polystyrene latex microspheres) used in the study also exhibited increased removal in the presence of an electric field. Single collector efficiencies were also computed using approximate trajectory analysis, modified to account for the applied external electric field. The results of these calculations were used to qualitatively explain the trends in the experimental observations.     

Characterisation of PSE zones in semimembranosus pig muscle

Pig semimembranosus muscles, sampled from normal hams or from PSE-zones of defective hams, were analysed by histochemistry and electrophoretic techniques. PSE zones were characterised by a disorganisation of fibre alignment and a significant increase of inter fibre spacing (26.2% vs. 16.9%, p<0.05). Protein solubility was significantly lower in defective muscle (55.4 vs. 91.5mg/g, p<0.001). SDS-PAGE evidenced in such samples a lower abundance of the 97, 40 and 26kDa bands in the sarcoplasmic fraction and a higher abundance of the 97, 58, 34, 31, 15 and 11kDa bands in the myofibrillar fraction. Intensity of the MHC band (200kDa) was lower in PSE zone samples. By 2-D electrophoresis, it was shown that troponin T, MLC 1 and alpha-crystallin were less proteolysed in defective muscles, while creatine kinase fragments were more represented. One form of HSP 27 was absent from PSE zone samples. Overall, meat from PSE-zones and fast pH fall-PSE meat show numerous histological and biochemical similarities, particularly in their protein characteristics.     

Long-path monitoring of NO2 with a 635 nm diode laser using frequency-modulation spectroscopy

In situ monitoring of traffic-generated nitrogen dioxide (NO2) emissions using long-path absorption spectroscopy is reported. High-sensitivity detection of NO2 is achieved by employing two-tone frequency-modulation spectroscopy at a visible absorption band using a tunable high-power diode laser operated around 635 nm. A real-time absorption spectrometer is accomplished by repetitively applying a rectangular current pulse to the diode-laser operating current, allowing detection of isolated NO2 absorption lines. A detection limit of 10 microg/m3 for NO2 at atmospheric pressure using a 160 m absorption path is demonstrated. Continuous monitoring of NO2 over a road intersection at peak traffic is performed.     

Spines of random constraint satisfaction problems: definition and connection with computational complexity

We study the connection between the order of phase transitions in combinatorial problems and the complexity of decision algorithms for such problems. We rigorously show that, for a class of random constraint satisfaction problems, a limited connection between the two phenomena indeed exists. Specifically, we extend the definition of the spine order parameter of Bollobás et al. [10] to random constraint satisfaction problems, rigorously showing that for such problems a discontinuity of the spine is associated with a 2^Ω(n) resolution complexity (and thus a 2^Ω(n) complexity of DPLL algorithms) on random instances. The two phenomena have a common underlying cause: the emergence of “large” (linear size) minimally unsatisfiable subformulas of a random formula at the satisfiability phase transition.We present several further results that add weight to the intuition that random constraint satisfaction problems with a sharp threshold and a continuous spine are “qualitatively similar to random 2-SAT”. Finally, we argue that it is the spine rather than the backbone parameter whose continuity has implications for the decision complexity of combinatorial problems, and we provide experimental evidence that the two parameters can behave in a different manner.AMS subject classification 68Q25, 82B27     

A Model–View–Controller extension for pervasive multi-client user interfaces

This paper addresses the implementation of pervasive Java Web applications using a development approach that is based on the Model–View–Controller (MVC) design pattern. We combine the MVC methodology with a hierarchical task-based state transition model in order to achieve the distinction between the task state and the view state of an application. More precisely, we propose to add a device-independent TaskStateBean and a device-specific ViewStateBean for each task state as an extension to the J2EE Service to Worker design pattern. Furthermore, we suggest representing the task state and view state transition models as finite state automata in two sets of XML files. This paper shows that the distinction between an applications task state and view state is both intuitive and facilitates several, otherwise complex, tasks, such as changing devices on the fly.     

A comparison of various extractants for the estimation of extractable zinc in cacao-growing soils of south-western Nigeria

Forty-six soil samples from cacao plantations located in South-western Nigeria were analysed for extractable zinc by four methods, namely, ammonium acetate, dilute hydrochloric acid, magnesium chloride and diethylenetriamine pentaacetic acid (DPTA). Guinea corn (sorghum) was grown as a test crop. Relations among soil test methods, plant zinc uptake, and soil properties were examined by simple and multiple correlation analyses. The Zn extracted was in the following order: 1.0N NH₄OAc>0.1N HCl>2N MgCl₂>0.005M DTPA. The only correlation between extracts that was significant at the 5% level was between NH₄OAc and DTPA extractable Zn. No soil properties except iron and aluminium oxide were significantly correlated with soil test values. Silt, clay and silt plus clay were correlated at 5, 5 and 1% respectively with Zn uptake, but pH was not. Zinc uptake by the plant was more closely correlated with 2N MgCl₂ extractable Zn (r=+0.389) than with 1N NH₄OAc extractable Zn (r=+0.291); 0.1N HCl extractable Zn (r=+0.079); or with DTPA extractable Zn (r=+0.220). The best prediction of uptake by plants was observed in multiple regression analyses involving combination of MgCl₂ extractable Zn, pH, organic matter, and silt plus clay fraction (r=+0.601).     

Die Streuung von Werkstoffkennwerten – Hochfester Stahldraht für Seile und Bündel in der Bautechnik

Das Last-Längs- (und Quer-)Verformungsverhalten von Drähten unter Längslast wird einander zugeordnet. Für einige Drahtsorten werden verschiedene Eigenschaften mit ihren gemessenen statistischen Kennwerten angegeben und Summenlinien aufgetragen. Die von der Norm vorgegebenen Toleranzbereiche werden diskutiert. Der Einfluß der an kurzen Drahtproben ermittelten Streuungen von Werkstoffkennwerten auf das Verformungs- und Bruchverhalten der Zugglieder wird herausgestellt.