Surface studies of aminoferrocene derivatives on gold: electrochemical sensors for chemical warfare agents

The cystamine conjugate [(BocNH)Fc(CO)CSA]2 was prepared by coupling cystamine with the N-protected ferrocene amino acid derivative BocHN-Fc-COOH and was fully characterized by spectroscopic methods and by single-crystal X-ray diffraction. The cystamine conjugate forms films on gold substrates, which upon deprotection of the amino group, react with chemical warfare agent (CWA) mimics, upon which the redox properties of the Fc group are affected significantly. Cyclic voltammetry shows 50(5) mV anodic shifts of the Fc redox potentials after exposure to EtSCH2CH2Cl, a simulant for sulfur mustard HD (MA), and (NC)(EtO)2P(O), a simulant for nerve agent Tabun (NA). Exposure to MA and NA causes an increase in 2.3 and 4.5 ng mass, respectively, in QCM which indicates ca. 70% efficiency in Boc-deprotection. Ellipsometry measured a film thickness increase from 6(+/-1) A for the deprotected film to 10(+/-4) A for the film modified with MA and to 7(+/-2) A for the film modified with NA. AFM measurements show changes in the thickness and morphology of the film after reaction with MA and NA. The surfaces were analyzed by X-ray photoelectron spectroscopy (XPS) and clearly show the attachment of the cystamine conjugate on the surface and its reaction with CWA mimics.     

Lipidomic Approaches to Study HDL Metabolism in Patients with Central Obesity Diagnosed with Metabolic Syndrome

The metabolic syndrome (MetS) is a cluster of cardiovascular risk factors characterised by central obesity, atherogenic dyslipidaemia, and changes in the circulating lipidome; the underlying mechanisms that lead to this lipid remodelling have only been partially elucidated. This study used an integrated “omics” approach (untargeted whole serum lipidomics, targeted proteomics, and lipoprotein lipidomics) to study lipoprotein remodelling and HDL composition in subjects with central obesity diagnosed with MetS (vs. controls). Compared with healthy subjects, MetS patients showed higher free fatty acids, diglycerides, phosphatidylcholines, and triglycerides, particularly those enriched in products of de novo lipogenesis. On the other hand, the “lysophosphatidylcholines to phosphatidylcholines” and “cholesteryl ester to free cholesterol” ratios were reduced, pointing to a lower activity of lecithin cholesterol acyltransferase (LCAT) in MetS; LCAT activity (directly measured and predicted by lipidomic ratios) was positively correlated with high-density lipoprotein cholesterol (HDL-C) and negatively correlated with body mass index (BMI) and insulin resistance. Moreover, many phosphatidylcholines and sphingomyelins were significantly lower in the HDL of MetS patients and strongly correlated with BMI and clinical metabolic parameters. These results suggest that MetS is associated with an impairment of phospholipid metabolism in HDL, partially led by LCAT, and associated with obesity and underlying insulin resistance. This study proposes a candidate strategy to use integrated “omics” approaches to gain mechanistic insights into lipoprotein remodelling, thus deepening the knowledge regarding the molecular basis of the association between MetS and atherosclerosis.     

A statistical model for the failure of glass plates due to nickel sulfide inclusions

Nickel Sulfide (NiS) inclusions can provoke the rupture of thermally treated glass due to a phase transformation with volume increase that stresses the surrounding glass. Starting from a Pareto statistics for the population of inclusion sizes, from an assumed kinetics of the phase transformation, a micro-mechanically motivated model provides the statistical characterization of the probability of spontaneous failure of glass during lifetime. A distinction based upon the composition of NiS is used to discuss the effects of the heat soak test (HST), where glass remains at high temperature for a certain time to speed-up the phase transformation and destroy those elements with critical inclusions. Three functions à la Weibull for the probability of spontaneous rupture during lifetime are theoretically derived for the case of no HST, short HST, and long HST. In particular, the probability of collapse for long HSTs depends upon the holding time in the oven. An explanatory example shows the potentiality of the model for optimizing the HST parameters toward a target probability of failure, but experimental campaigns are needed for a proper calibration.     

Quantitative Assessment of Affinity Selection Performance by Using DNA-Encoded Chemical Libraries

DNA-encoded chemical libraries are often used for the discovery of ligands against protein targets of interest. These large collections of DNA-barcoded chemical compounds are typically screened by using affinity capture methodologies followed by PCR amplification and DNA sequencing procedures. However, the performance of individual steps in the selection procedures has been scarcely investigated, so far. Herein, the quantitative analysis of selection experiments, by using three ligands with different affinity to carbonic anhydrase IX as model compounds, is described. In the first set of experiments, quantitative PCR (qPCR) procedures are used to evaluate the recovery and selectivity for affinity capture procedures performed on different solid-phase supports, which are commonly used for library screening. In the second step, both qPCR and analysis of DNA sequencing results are used to assess the recovery and selectivity of individual carbonic anhydrase IX ligands in a library, containing 360 000 compounds. Collectively, this study reveals that selection procedures can be efficient for ligands with sub-micromolar dissociation constants to the target protein of interest, but also that selection performance dramatically drops if 10⁴ copies per library member are used as the input.     

The photoinduced charge transfer mechanism in aligned and unaligned carbon nanotubes

Using time-resolved reflectivity measurements on unaligned and aligned bundled single-wall carbon nanotubes with a pump energy of 1.55 eV, quasi-resonant with the second Van Hove singularity of semiconducting tubes, a positive sign of the transient reflectivity is detected in unaligned nanotubes. In contrast a negative sign is detected in aligned nanotubes. This discovery addresses a long-standing question showing that in unaligned nanotubes the stronger intertube interactions favor the formation of short-lived free charge carriers in semiconducting tubes. A detailed analysis of the transient reflectivity spectral response shows that the free carriers in the photo-excited state of semiconducting tubes move towards metallic tubes in about 400 fs.     

Biodiesel production from Stichococcus strains at laboratory scale

BACKGROUND: This paper reports the results of an experimental campaign of autotrophic cultures of Stichococcus strains aiming at selecting the most promising strain for biofuel production. The strain selected—S. bacillaris 158/11—was cultivated in 1 L lab‐scale bubble column photobioreactors under fed‐batch and semi‐continuous conditions. A Bold basal medium supplemented with NaNO₃ as nitrogen source was adopted. Tests were carried out at 23 °C, 140 µE m^?2 s^?1, and air flow rate ranging between 0.4 and 4 vvm. Cultures were characterized in terms of pH, concentration of total nitrogen, total organic carbon, total inorganic carbon, biomass, lipid fraction and methyl‐ester distribution of transesterified lipids. RESULTS: S. bacillaris 158/11 proved to be the best strain to produce biodiesel. Methyl‐ester distribution was characterized by a large fraction of methyl palmitate, methyl linolenate, methyl linoleate, and methyl oleate along with phytol. The process photosynthetic efficiency—fraction of available light stored as chemical energy ‐ was about 1.5%. Specific biomass productivity was ～60 mg_DM L^?1 day^?1 under the semi‐continuous conditions tested. Total lipid productivity was 14 mg L^?1 day^?1 at a dilution rate of 0.050 L day^?1. CONCLUSION: S. bacillaris 158/11 is a potential strain for massive microalgae cultures for biofuel production. Higher biomass/total‐lipid productivity could be obtained in sunlight. Copyright © 2011 Society of Chemical Industry     

Optimized production of a high-performance hybrid biomaterial: biomineralized spider silk for bone tissue engineering

Silks have been widely used as biomaterials due to their biocompatibility, biodegradability, and excellent mechanical properties. In the present work, native spider silk was used as organic template for controlled nucleation of hydroxyapatite (HA) nano-coating that can act as biomimetic interface. Different bio-inspired neutralization methods and process parameters were evaluated to optimize the silk functionalization. The morphology and chemical composition were investigated by scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction analysis and mechanical properties were studied through tensile tests. Results showed that the optimized protocol enabled a controlled and homogeneous nucleation of apatite nano-crystals while maintaining silk mechanical performances after mineralization. This study reports the optimization of a simple and effective bio-inspired nucleation process for precise nucleation of HA onto spider silk templates, suitable to develop high-performance hybrid interfaces for bone tissue engineering. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48739.     

A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

Partial safety factors for laminated glass

Glass plies can be bonded together by polymeric interlayers to form laminated glass. Thanks to the capacity in finding alternative stress paths after partial breakage, it is commonly accepted that the more the layers are, the higher the safety level is. However, a negative aspect is that the tensile strength of glass carries a size effect in terms of surface area, which increases with lamination. Here we evaluate these competing factors by calibrating the partial safety factors to be used in semi-probabilistic (level-I) design, through comparison with probabilistic (level-III) methods in paradigmatic case-studies under wind, snow, and dead weight. Starting from a two-parameter Weibull distribution for glass strength, the “failure modes” approach determines the statistical distribution of strength for a multi-laminate as a function of the number of plies, which interferes with the statistics for actions. As a function of the target probability of failure for the assigned class of consequence, we introduce a new coefficient in the verification formula of level-I, to account for the effects of lamination with dependence upon the number of plies. We find that there is strong gain when passing from a monolith to a two-ply laminate, but the advantage fades by increasing the number of layers. Verification formulas of this type could avoid overconservative design.