The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

Irradiation of large area Mylar membrane and characterization of nuclear track filter

Ion irradiation of Si⁸⁺ ion beam of 100 MeV was scattered by a gold foil on a Mylar membrane of 25 Μm thickness in the form of film roll (width, 12.5 cm and length, 400 cm) at the Nuclear Science Centre, New Delhi. The characterization of etched nuclear tracks was carried out by gas permeation measurements. The samples cut from the film roll of required size for permeability measurements were etched in a controlled manner in a constant temperature bath of 6N NaOH solution. The opening of the conical etched tracks was characterized by hydrogen gas permeation.     

Effect of Organic Additives on Electrochemical Surface Precipitation and Polymorphism of CaCO3

The inhibition effect of three organic additives on the precipitation and polymorphism of CaCO₃ deposited on gold surfaces was investigated using electrochemical and microscopic techniques. Additives, two polyacrylic acid (PAA) polymers with different molecular weights (Mw 2100, Mw 30,000), and 1,2,4,5‐benzenetetracarboxylic acid (BTCA), were either added to the solution before or during deposition. In the presence of 100 ppm of one of the three additives in solution, almost no scale was observed on the surface for at least 24 hours. In the presence of lower concentrations of PAA Mw 2100, only distorted calcite crystals were obtained while with PAA Mw 30,000 the polymorph was spherical vaterite. A mixture of calcite and vaterite was observed with the BTCA additive. Addition of the polymers inhibits further nucleation and growth even if added after partial deposition of CaCO₃ while BTCA has no effect once nucleation has started. The results indicate that the inhibit ion effect of the PAA polymers is due to adsorption on the electrode surface while the effect of BTCA is related to chelation of calcium ions in solution.     

Self-Consistent Effects on the Starting Current of Gyrotron Oscillators

Self-consistent effects on the starting current of gyrotron oscillators are examined. Field profiles in the open cavity are shown to be sensitive to the interaction dynamics. This can either significantly raise or lower the oscillation threshold, particularly for the low-Q modes. The transition from resonant-mode oscillations at the low magnetic field to backward-wave oscillations at the high magnetic field is demonstrated.     

Noise modeling for RF CMOS circuit simulation

The RF noise in 0.18-/spl mu/m CMOS technology has been measured and modeled. In contrast to some other groups, we find only a moderate enhancement of the drain current noise for short-channel MOSFETs. The gate current noise on the other hand is more significantly enhanced, which is explained by the effects of the gate resistance. The experimental results are modeled with a nonquasi-static RF model, based on channel segmentation, which is capable of predicting both drain and gate current noise accurately. Experimental evidence is shown for two additional noise mechanisms: 1) avalanche noise associated with the avalanche current from drain to bulk and 2) shot noise in the direct-tunneling gate leakage current. Additionally, we show low-frequency noise measurements, which strongly point toward an explanation of the 1/f noise based on carrier trapping, not only in n-channel MOSFETs, but also in p-channel MOSFETs.     

Differentiating visual and kinesthetic imagery in mental practice.

Through two experiments, the study sought to emphasize the usefulness of the visual and kinesthetic imagery in mental practice. In Experiment 1, it was hypothesized that when the task to be learned through mental practice necessitates the reproduction of a form by drawing, the visual image, which provides a wide span of apprehension, is more suitable than the kinesthetic image. On the other hand, the kinesthetic image that supplies inputs from the muscles' positions and movements should be more appropriate for the acquisition of the duration of the drawing. In Experiment 2, it was hypothesized that the task, transformed into a motor task necessitating minute coordination of the two hands, would benefit more from kinesthetic imagery. To have optimal control over what was actually experienced during mental practice, the participants' imagery skills were measured. The participants also benefited from prior imagery training. The results demonstrate that when using mental practice to initially acquire a task, visual imagery is better for tasks that emphasize form while kinesthetic imagery is better for those tasks that emphasize timing or minute coordination of the two hands. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

Decision support for AIDS control programmes in Eastern Africa

The Acquired Immune Deficiency Syndrome (AIDS) constitutes the worst hazard to health care systems in Eastern Africa. Misallocation of scarce resources of AIDS Control Programmes will unavoidably lead to additional infections and casualties. The following paper discusses a system dynamics model which allows to assess the impact of different interventions on a pattern population in Eastern Africa. It becomes obvious that short- and long-term consequences of these programmes differ significantly. The optimal allocation of resources, therefore, is highly complex and calls for decision support systems to sustain AIDS control programmes.     

Short-term frequency stability of clock generators for multigigahertz rapid-single-flux quantum digital circuits

Superconducting digital systems based on Josephson junctions have generally used a synchronous timing strategy. A master clock signal is used to delimit a data window during which the system changes state and data is transferred from one block to the next. The temporal stability of the clock signal has a profound effect on the performance of rapid single flux quantum (RSFQ) digital systems. In particular, short-term clock fluctuations, or clock jitter, can degrade system performance due to the hazard of timing constraint violations. The successful development of large-scale RSFQ digital systems will require highly stable multigigahertz on-chip clock sources. To meet this need, methods for characterizing and measuring the short-term stability of such sources are required. We identify the relevant figure of merit to characterize and compare various clocks: the cycle-to-cycle standard deviation of the clock periods. We present experimental techniques for the measurement of this figure of merit and apply them to the measurement of jitter in a clock generator used often in RSFQ systems, the ring oscillator. High-frequency phase noise measurements found the jitter of a 9.6-GHz clock to be in the range from 0.6% to 0.36% of the clock period. The measured values of clock jitter fell within the 95% confidence interval of our stochastic circuit simulations. This was sufficient evidence to conclude that thermal noise from the resistors in the circuit may be the dominant source of jitter in the ring oscillator.     

Creep of PVDF monofilament sutures: service performance prediction from short-term tests

Isothermal short-term creep of poly (vinylidene fluoride) (PVDF) monofilament sutures was determined at several temperatures between 10 and 90 °C under the stress of 10 MPa. Long term service performance was predicted for 10 decades of time. The compliance master curve as a function of time fits a hyperbolic sine equation. The temperature shift factor as a function of the temperature a_T (T) is accurately represented by a general equation based on free volume. A simple relationship between the two parameters of the equation is explored. The viscoelasticity of PVDF is also seen in dynamic mechanical analysis performed at the frequency of 1 Hz. The origin of the viscoelastic character well present in the deformability of the PVDF in service is due to the occurrence of the α_c relaxation that is active at ∼50 °C (E″ peak at 1 Hz).