国内外型焦生产工艺及发展前景

介绍了国内外型焦技术的生产工艺、型煤碳化的过程和影响因素,以及国内目前几种碳化窑炉,通过对型焦和焦炭的对比分析,指出洁净型焦生产技术的优势必然会使它在未来具有巨大的发展空间。     

稀土BR／SBR共混胶的性能

研究了４种共混比的ＬｎＢＲ／ＳＢＲ共混生胶、混炼胶及硫化胶的性能，并与ＮｉＢＲ／ＳＢＲ共混胶进行了对比。结果表明，共混生胶的ＭＬ均低于ＬｎＢＲ及ＳＢＲ；当ＬｎＢＲ／ＳＢＲ共混混炼胶的ＭＬ、剪切应力、出口膨胀及硫化速度均低于ＮｉＢＲ／ＳＢＲ共混胶，挤出物外观优于后者；共混硫化胶的拉伸强度、热空气老化、拉伸疲劳、湿滑、耐磨等性能均明显优于后者，生热和透气率高于后者。     

施釉机器人静力学分析的研究

根据6自由度施釉机器人的终端受力，利用雅可比矩阵，求解出各转动关节在稳定平衡状态下的受力和所需的驱动力矩，为设计施釉机器人确定各转轴的电机及其他动力元件提供了可靠的依据。     

纳米技术与纳米材料(X)--纳米二氧化钛的表面处理

表面处理被用来提高纳米TiO2的耐久性和分散性。介绍了纳米TiO2表面处理效果的评价和表征方法。综述了纳米TiO2的表面处理的原理、方法和研究进展。预测新表面处理剂的合成、新的表面处理方法以及表面处理剂与纳米TiO2核体之间的作用机理将是下一步研究的重点。指出在对纳米TiO2进行表面处理的规模化生产中，关键要解决分散和异相成核的技术问题。     

PVC-FeCl3催化合成糠偶酰

研究了以糠醛为原料，维生素B1(VB1)为催化剂，采用安息香缩合反应合成糠偶姻，通过PVC-FeCl3及醋酸体系将其氧化为糠偶酰，并对中间产物及产物进行结构表征。     

草酸镁分解法制备纳米氧化镁

以草酸和氯化镁为原料，采用固液法制备了纳米级氧化镁粉体。优化了试验条件，并用TEM和XRD对纳米氧化镁的粒子结构和形貌进行了研究。结果表明，在600℃焙烧，得到的纳米氧化镁粒度分布均匀，平均粒径为15nm。并对固液法生成纳米氧化镁的机理进行了初步探讨。     

Determination and correlation solubility of 4-nitroimidazole in twelve pure solvents from 278.15 K to 323.15 K

In this paper, the solubility of 4-nitroimidazole in twelve pure solvents (toluene, benzene, 1,4-dioxane, acetonitrile, ethyl acetate, acetone, GBL, ethanol, methanol, n-butanol, DMF and NMP) were determined by using the laser monitoring system from 278.15 K to 323.15 K under 101.1 kPa, which are 0.00018-0.00070, 0.00021-0.00073, 0.00034-0.00092, 0.00038-0.00142, 0.00047-0.00120, 0.00126-0.00303, 0.00225-0.00517, 0.00310-0.00724, 0.00467-0.00982, 0.00453-0.01940, 0.01947-0.04652, and 0.04670-0.07452, respectively. At constant temperature, the mole fraction solubility of 4-nitroimidazole were increased as the following order: toluene < benzene < 1,4-dioxane < (ethyl acetate or acetonitrile) < acetone < GBL < ethanol < (methanol or nbutanol) < DMF < NMP, and the solubility of 4-nitroimidazole in (ethyl acetate, acetonitrile) and (methanol, n-butanol) had an intersection point at 297.55 K and 281.85 K, respectively. The solubility of 4-nitroimidazole could be increased with increasing temperature in twelve pure solvents. The ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation were used to correlate the experimental values. The experimental solubility values were employed to calculate the standard dissolution enthalpy, standard dissolution entropy and Gibbs energy. The dissolution of 4-nitroimidazole could be an endothermic process in twelve pure solvents. The determination and fitting solubility of 4-nitroimidazole have important guiding significance for the purification and crystallization of its preparation process.     

Epoxidation of propylene by using [π-C5H5NC16H33]3[PW4O16] as catalyst and with hydrogen peroxide generated by 2-ethylanthrahydroquinone and molecular oxygen

The epoxidation of propylene catalyzed by a reaction-controlled phase transfer catalyst [π-C₅H₅NC₁₆H₃₃]₃[PW₄O₁₆] is investigated. The H₂O₂ is generated by the oxidation of 2-ethylanthrahydroquinone (EAHQ) with molecular oxygen in the organic solvent. Under mild conditions, the selectivity for propylene oxide, based on propylene, is 95%, and the yield, based on 2-ethylanthrahydroquinone, is 85%. During the epoxidation, the catalytic system is homogeneous. However, after the H₂O₂ is used up, the catalyst can be recovered as a precipitate and can be reused. After the epoxidation reaction, 2-ethylanthraquinone can be regenerated to 2-ethylanthrahydroquinone by catalytic hydrogenation, and no coproduct is produced.     

Characterization of Precursor-Derived Silicon-Carbon-Nitrogen Ceramics after Creep Testing

Precursor-derived Si-C-N ceramics after creep testing in air were characterized using X-ray diffractometry (XRD) and transmission electron microscopy (TEM). XRD analysis showed that the crept Si-C-N ceramics were covered by an α-cristobalite layer. TEM observations revealed that the precipitated nanocrystallites in the crept Si-C-N ceramics were β-SiC. Between α-cristobalite and crept Si-C-N ceramic, there was an intermediate zone in which Si₂N₂O nanocrystallites were distributed homogeneously. Moreover, Si₂N₂O nanocrystallites were often found covering the surface of nanosized gas channels in the crept Si-C-N ceramics, where no α-cristobalite phase was detected. Based on these observations, a two-step oxidation mechanism of Si-C-N ceramics during creep testing in air was proposed.     

Hydrothermal synthesis of flaky crystallized La2Ti2O7 for producing hydrogen from photocatalytic water splitting

Flaky monoclinic La₂Ti₂O₇ was prepared via a hydrothermal method based on the reaction of Ti(SO₄)₂ and La(NO₃)₃. Relative to the solid-state reaction sample, the flaky La₂Ti₂O₇ showed higher surface areas, much smaller crystal size and more efficient light absorption. All these factors led to the higher photoactivity to produce H₂ from water splitting under UV irradiation.