Edge-to-edge plane matching as a criterion for interphase boundaries of low energy

As demonstrated by Aaronson and his colleagues over five decades or so, the structure, energy, and dynamic response of interphase boundaries in metallic systems are strongly correlated. It has also become clear that very few, if any, solid/solid transformation interfaces can be considered truly “incoherent.” Most treatments of the geometry of irrational interfaces (facet planes) have focused on the density of coincidence sites or near-coincidence sites (NCS); this naturally involves consideration of the matching of densely packed atomic planes lying parallel to the facet. Edge-to-edge plane matching represents an alternative and, perhaps, more general approach to the geometry of transformation interfaces. For diffusional transformations, growth ledges are required to displace and reproduce the structure of the facet plane; their geometrical properties are distinct from those of the interfacial facets. The role of local thermodynamic driving force in determining the migration mode is assessed. Several recent observations of the transient faceting of irrational interfaces, for which the density of NCS is relatively low, have stimulated considerations of the significance of the invariant-line condition and of edge-to-edge plane matching as criteria for local minima in interfacial free energy. This article is based on a presentation made in the “Hume-Rothery Symposium on Structure and Diffusional Growth Mechanisms of Irrational Interphase Boundaries,” which occurred during the TMS Winter meeting, March 15–17, 2004, in Charlotte, NC, under the auspices of the TMS Alloy Phases Committee and the co-sponsorship of the TMS-ASM Phase Transformations Committee.     

Phenomena-based thermal-hydraulic modeling requirements for systems analysis of a Modular High Temperature Gas-Cooled Reactor

The Modular High Temperature Gas-Cooled Reactor (MHTGR) is a candidate design for new production and commercial power nuclear reactors. The MHTGR has inherent safety features including: (1) passive shutdown and decay heat removal, (2) reduced requirements for operator intervention, thereby reducing sensitivity to operator error, and (3) long time intervals for corrective action. In support of the Department of Energy's (DOE) initial development of the design, the authors have completed an evaluation of the thermal-hydraulic phenomena that will dominate the plant response during representative normal, off-normal and accident conditions. Phenomena having significance to the plant behavior have been identified, and ranked with respect to their relative importance in satisfying operational, investment and/or safety criteria. The resulting information provides the basis for evaluating the applicability of existing computer codes, and defines the requirements for the development of new codes, for thermal-hydraulic systems analysis. The phenomena-based requirements also support the quality assurance related verification and validation of these codes. This paper briefly describes the methodology employed, and gives illustrative examples of the resulting requirements. References are cited for reports that document the full body of requirements and provide additional information for the methodology.     

Effect of Floodwater Extraction on Mountain Stream Morphology

Floodwater is often extracted for consumptive purposes from western mountain streams in the United States. The long-term extraction of floodwater may alter the morphological and ecological balance of such streams. Scale model experiments based on eight mountain gravel-bed streams in Idaho were conducted to test the effects of floodwater extraction on stream morphology. The model channel transported a poorly sorted mix of model “gravel,” as well as copious amounts of model “sand.” The channel had a discontinuous floodplain, developed its own bar morphology, and contained large model colluvium as well as a bedrock platform. A mobile-bed equilibrium was first developed using a repeated hydrograph. The experiment was then repeated using a sliding cutoff discharge. The discharges in the hydrograph that were below a given cutoff discharge were reduced to 30% of bankfull discharge. By raising the cutoff discharge, it was possible to study the effect of increasing severity of floodwater extraction on stream morphology. The experiments indicated an increase in sand content on the bed surface and a decrease in the standard deviation of fluctuations in bed elevation with increasing severity of floodwater extraction.     

Durability of polymeric glazing materials for solar applications

The economic viability of solar collector systems for domestic hot water (DHW) generation is strongly linked to the cost of such systems. Installation and hardware costs must be reduced by 50% to allow significant market penetration. An attractive approach to cost reduction is to replace glass and metal parts with less expensive, lighter weight polymeric components. Weight reduction decreases the cost of shipping, handling, and installation. The use of polymeric materials also allows the benefits and cost savings associated with well established manufacturing processes, along with savings associated with improved fastening, reduced part count, and overall assembly refinements. A key challenge is to maintain adequate system performance and assure requisite durability for extended lifetimes. Results of preliminary and ongoing screening tests for a large number of candidate polymeric glazing materials are presented. Based on these results, two specific glazings with moderate and poor weathering stability are selected to demonstrate how a service lifetime methodology can be applied to accurately predict the optical performance of these materials during in-service use. A summary is given for data obtained by outdoor exposure and indoor testing of polyvinyl chloride (PVC) and high temperature modified polycarbonate copolymer (coPC) materials, and an initial risk analysis is given for the two materials. Screening tests and analyses for service lifetime prediction are discussed. A methodology that provides a way to derive correlations between degradation experienced by materials exposed to controlled accelerated laboratory exposure conditions and materials exposed to in-service conditions is given, and a validation is presented for the methodology based upon durability test results for PVC and coPC.     

The differential effectiveness of group psychotherapy: A meta-analytic perspective.

The differential effectiveness of group psychotherapy was estimated in a meta-analysis of 111 experimental and quasi-experimental studies published over the past 20 years. A number of client, therapist, group, and methodological variables were examined in an attempt to determine specific as well as generic effectiveness. Three different effect sizes were computed: active versus wait list, active versus alternative treatment, and pre- to posttreatment improvement rates. The active versus wait list overall effect size (0.58) indicated that the average recipient of group treatment is better off than 72% of untreated controls. Improvement was related to group composition, setting, and diagnosis. Findings are discussed within the context of what the authors have learned about group treatment, meta-analytic studies of the extant group literature, and what remains for future research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Evaluation of Soybean Seedcoat Cracking During Drying:PART II. Using MRI

MRI techniques were developed and employed for non-destructive and noninvasive study of seedcoat cracking in low moisture soybean kernels during heated air drying. Proton density image and transient moisture distribution profile of a single soybean kernel can be obtained using MRI. These MRI techniques proved to be particularly useful for the continuous observation of initiation and propagation of seedcoat cracking during the entire period of drying process without interruption.

The proton density images of soybean kernels showed that seedcoat cracking was initiated perpendicular to the long axis of the kernel near the hilum. The transient moisture distribution profiles in soybean kernels during drying indicate that moisture gradient developed during drying was higher in the seedcoat than in the cotyledon. Drying temperature and initial average moisture content were positively correlated with the soyhean seedcoat crackig. The location of the     

Existentialism and epistemology.

Comments on B. Vandenberg's (see record 1992-12211-001) article on epistemology and an existential consideration of development, taking exception with both his definition of existentialism and his characterization of Piaget's work. Existentialism, it is argued, is not an alternative to epistemology, but a particular style of responding to philosophic questions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)