Dynamic thread mapping of shared memory applications by exploiting cache coherence protocols

In current computer architectures, the communication performance between threads varies depending on the memory hierarchy. This performance difference must be considered when mapping parallel applications to processor cores. In parallel applications based on the shared memory paradigm, the communication is difficult to detect because it is implicit. Furthermore, dynamic mapping introduces several challenges, since it needs to find a suitable mapping and migrate the threads with a low overhead during the execution of the application. We propose a mechanism to detect the communication pattern of shared memory applications by monitoring cache coherence protocols. We also propose heuristics that, combined with our communication detection mechanism, allow the mapping to be performed dynamically by the operating system. Experiments with the NAS Parallel Benchmarks showed a reduction of up to 13.9% of the execution time, 30.5% of the cache misses and 39.4% of the number of invalidation messages.     

Production of β-SiC by pyrolysis of rice husk in gas furnaces

Short fibers and fine particles of β-SiC were obtained by pyrolysis of Colombian rice husk (RH). The synthesis of SiC was carried out in a gas furnace: a mathematical model was developed in order to design and build this equipment and the process was optimized using an experimental design that included variables such as temperature, pyrolysis time, type of catalyst, and process atmosphere. The obtained material was characterized by using FTIR, DRX and SEM for microstructural characterization and EDS technique for chemical analysis.     

Sex pheromone communication in the nematode,Rhabditis pellio

Both males and females ofRhabditis pellio release pheromones that attract the opposite sex prior to copulation. A quantitative bioassay for the female-produced pheromone was designed, based on male movement toward a pheromone source placed at one end of a 10-mm strip of bacterial material maintained on nutrient agar in a petri plate. Females produced pheromone from the age at which they attained the adult stage (3 days following hatching from the egg) and maintained a relatively constant production level until at least the ninth day of life. Similarly, males became responsive to the female pheromone by the third day and remained responsive through the ninth day, although the time required for the males to migrate toward a female pheromone source increased with increasing age. No daily rhythm of pheromone responsiveness by males or pheromone production by females was observed when the nematodes were conditioned to a 1212 h light-dark cycle.     

Chemical analysis of ozonized theobroma fat

Ozonized theobroma fat is used as raw material in the manufacture of pessaries and cosmetic creams. Ozonization of theobroma fat with water was carried out at different applied ozone dosages, and the resultant PV, acid value, iodine value, total hydroperoxide content, and FA content were determined. PV and total hydroperoxide content showed a notable increase with applied ozone dosage up to 35.7 mg/g. Acid value varied slightly from 4.1 to 9.9 mg KOH/g, and the iodine value fell to zero. PV and total hydroperoxide content increased slightly with a higher applied ozone dosage. The comparison of total hydroperoxide measurement using ferrous oxidation in xylenol orange assay and traditional iodometric assay for PV determination showed a significant linear correlation. Small amounts of oleic acid were found in ozonized theobroma fat samples with iodine value equaling zero, which demonstrated that iodine value determination is an inexact assay. During ozonization of theobroma fat, an increase in acid value of 18.9-fold with respect to the initial value was observed owing to decomposition of peroxide.     

Heterogeneous networking

In this article, security challenges related to a mobile heterogeneous networking environment, and the general access patterns are discussed. A novel, unified networking architecture that enables secure heterogeneous networking, both in terms of networks and user devices is discussed. A comprehensive security framework providing a generalized authentication scheme using the Extensible Authentication Protocol (EAP) is then presented, by taking into account existing methods for secure network and device access.     

Polyester–polycarbonate blends. V. Linear aliphatic polyesters

Polycarbonate blends with the linear aliphatic polyesters poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(1,4-butylene adipate) (PBA), and poly(hexamethylene sebacate) (PHS) were prepared by solution casting. Blends containing PES, PEA, and PBA exhibited a single T_g by DSC and thus form a single, miscible amorphous phase with polycarbonate. However, blends containing PHS exhibited only partial miscibility. Crystallinity of the polyesters was reduced by mixing with polycarbonate; however, plasticization by the polyesters induced crystallization of the polycarbonate. Miscibility in these systems is the result of an exothermic heat of mixing stemming from an interaction of the carbonyl dipole of the ester group with the aromatic carbonate. The effect of polyester structure on miscibility with polycarbonate is interpreted by and correlated with heats of mixing obtained by direct calorimetry of low molecular weight liquid analogs of the polymers.     

Synthesis of Biodiesel from Canola Oil Using Heterogeneous Base Catalyst

A series of alkali metal (Li, Na, K) promoted alkali earth oxides (CaO, BaO, MgO), as well as K₂CO₃ supported on alumina (Al₂O₃), were prepared and used as catalysts for transesterification of canola oil with methanol. Four catalysts such as K₂CO₃/Al₂O₃ and alkali metal (Li, Na, K) promoted BaO were effective for transesterification with >85 wt% of methyl esters. ICP-MS analysis revealed that leaching of barium in ester phase was too high (~1,000 ppm) when BaO based catalysts were used. As barium is highly toxic, these catalysts were not used further for transesterification of canola oil. Optimization of reaction conditions such as molar ratio of alcohol to oil (6:1–12:1), reaction temperature (40–60 °C) and catalyst loading (1–3 wt%) was performed for most efficient and environmentally friendly K₂CO₃/Al₂O₃ catalyst to maximize ester yield using response surface methodology (RSM). The RSM suggested that a molar ratio of alcohol to oil 11.48:1, a reaction temperature of 60 °C, and catalyst loading 3.16 wt% were optimum for the production of ester from canola oil. The predicted value of ester yield was 96.3 wt% in 2 h, which was in agreement with the experimental results within 1.28%.     

Transesterification in poly(ethylene terephthalate) and poly(ethylene naphthalate 2,6-dicarboxylate) blends: model compounds study

Kinetics of transesterification reaction in poly(ethylene terephthalate)-poly(ethylene naphthalate 2,6-dicarboxylate), PET-PEN, blends resulting from melt processing was simulated using model compounds of ethylene dibenzoate (BEB) and ethylene dinaphthoate (NEN). The exchange reaction between BEB and NEN was followed by ¹H NMR spectroscopy using signals from the aliphatic protons of ethylene glycol moieties at 4.66 and 4.78 ppm, respectively. The first-order kinetics was established under pseudo-first-order conditions for both reactants. Thus, the overall transesterification reaction was second order reversible. The reversibility was confirmed experimentally by heating a mixed sequence of 1-benzoate 2-naphthoate ethylene (BEN) under similar conditions. Both forward reaction of the equimolar amounts of the reagents and reverse reaction came to equilibrium at the same molar ratio of the reactants and reaction products of roughly 0.25:0.50:0.25 for BEB, BEN, and NEN, respectively. The rate equation for the transesterification reaction in the model system was modified using half-concentration of BEN, which is the only effective in the intermolecular exchange. Direct ester-ester exchange was deduced as a prevailing mechanism for the transesterification reaction under the conditions studied, and the values of equilibrium and rate constants, as well as other basic thermodynamic and kinetic parameters were determined. The use of Zn(OAc)₂ as a catalyst resulted in a significant decrease in the activation enthalpy of transesterification, which might be due to the partial switch of the reaction mechanism from primarily pseudo-homolytic to more heterolytic where Zn^II acts as a Lewis base which binds to the ester carbonyl oxygen.     

Mid‐infrared spectroscopy as a tool for real‐time monitoring of ethanol absorption in glycols

Fast, simple, accurate, and inexpensive methods for obtaining analyte concentration data are desirable in the industrial sector. In the present study, the use of Fourier transform mid‐infrared (FT‐MIR) spectroscopy, combined with partial least squares (PLS) regression, was investigated as a tool for real‐time monitoring of processes of ethanol absorption in glycols. Calibration was performed using simple synthetic samples containing ethanol, water, and monoethylene glycol (MEG) or diethylene glycol (DEG). The PLS models presented excellent performance, with correlation coefficients (R²) close to unity and root‐mean‐square errors of cross‐validation (RMSECV) and prediction (RMSEP) lower than 2% of the calibration data ranges for both analytes (ethanol and water) in both absorbents (MEG and DEG). The monitoring technique developed has potential to be applied in absorption processes and could also be used in other large‐scale unit operations, providing information in real time and enhancing process control.     

Poly(vinylidene fluoride) with zinc oxide and carbon nanotubes applied to pressure sheath layers in oil and gas pipelines

In this work, PVDF composites containing 0.2% (m/m) of carbon nanotubes (MWCNTs), PVDF with 5.0% (m/m) of zinc oxide (ZnO), and composites containing both particles in the same contents in the matrix were melt processed in a mini-extruder machine with double screws, using the counter-rotation mode. Composites were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), dynamic-mechanical analysis (DMA), and contact angle tests (CA). The samples presented the predominance of the α phase, with an increased degree of crystallinity as well as an increase in dimensional stability by incorporating both fillers, showing a synergistic effect between these particles, as shown on FTIR, DSC, and XRD results. SEM images showed a good dispersion of high aspect ratio particles. In general, DMA and TGA analysis showed that composites had not decreased their thermal and mechanical performance when compared to neat PVDF. Results of CA analysis showed an increase in the hydrophobicity of the sample containing MWCNTs. Permeability tests were also performed using a differential pressure system, combining high temperature and pressure, obtaining permeability measures and time lag. This work presents an alternative of composite materials, suggesting its application in the internal pressure sheath layers of oil and gas flexible pipes.