Biodiesel compatibility with carbon steel and HDPE parts

Compatibility of the new environmentally-friendly alternative of diesel engine fuels, biodiesel, with storage and engine part materials, is still an open issue. In this work, the interaction between three fuels (petroleum diesel and two types of biodiesel — soybean and sunflower) and two materials (carbon steel and high density polyethylene) used in storage and automotive tanks, is analyzed in detail. A wide set of characterization techniques was used to evaluate the changes in both solid and fluid materials, as weight change measurement, optical, scanning electron and atomic force (AFM) microscopies, Raman and FTIR spectroscopies, and differential scanning calorimetry. The AFM technique allowed detecting surface roughness and morphology changes in the metallic material following the trends in the weight losses. In the case of polymeric material, weight gain by fluid absorption occurred, being detected by the spectroscopic techniques. The biodiesel fuels underwent some ageing however this phenomenon did not affect the interaction between the biodiesel fuels and the substrates. The petrodiesel, which did not age, caused more significant degradation of the substrates.     

Accelerated aging and contact with food simulants in adhesion of amorphous hydrogenated carbon films obtained by the PECVD process from recycled PET from packaging

This work focuses principally on the influence of time, temperature, and contact with food simulants in adhesion of amorphous hydrogenated carbon (a‐C:H) films obtained by the plasma enhanced chemical vapor deposition process in recycled PET from packaging. Shelf life of packaging used in soft drinks, fruit juice, etc. is known to be ～ 6 months, with possible variations. The a‐C:H film, used in this study as a functional barrier against possible contaminants in recycled PET, was analyzed to determine possible alterations in its physical and chemical properties. The film underwent an accelerated aging test and was exposed to contact with food simulants listed by the FDA. In this case, adhesion is one of the properties most in need of conservation. This property was analyzed by means of the tape test and scanning electronic microscopy. Superficial chemical alterations resulting from both the accelerated aging test and contact with liquids were examined by the contact angle. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fusion intermediates of HIV-1 gp41 as targets for antibody production: design, synthesis, and HR1-HR2 complex purification and characterization of generated antibodies

The objective of this project was to study the interaction between HR1 and HR2, the stability of the complex formed, and to characterize the antibodies produced against monomeric HR1 and HR2 peptides as well as the HR1-HR2 complex. In this work, HR1 was mimicked by peptide N36, and HR2 was mimicked by peptide C34L and its analogues C34M2, C34M3, and C34D. Whereas C34M2 and C34M3 are partially composed of D-amino acids, C34D has same sequence as C34L, but is assembled entirely of D-amino acids. Using CD analysis, SPR assays, and gel filtration chromatography, we demonstrate the physical interaction between N36 and C34L and its analogues C34M2 and C34M3, but not C34D. We show that the HR1-HR2 complex is formed rapidly (<1?min) and remains stable, as demonstrated by its inability, in contrast to each free peptide, to inhibit the formation of syncytia. To generate antibodies with predetermined specificity against the transiently exposed intermediate that corresponds to the six-helix bundle structure, purified preformed HR1-HR2 complex was used, in parallel with monomeric HR1 and HR2 peptides, as immunogens in mice. Although the produced antibodies recognize total HIV-1 envelope glycoproteins in ELISA, they are unable to neutralize HIV-1-mediated fusion at 37?°C. However, if the incubation with these antibodies is carried out at 27?°C, a temperature that allows stabilization of the transient intermediate complex, anti-peptide antibodies are able to bind their corresponding domains in HeLa cells expressing HIV-1 gp41 in co-culture with HeLa CD4-CCR5/CXCR4 during the dynamic mechanism of membrane fusion. In agreement with the latter results, these antibodies, if previously incubated for 2?h at 27?°C, are able to strongly neutralize HIV-1 entry by membrane fusion, as shown by their ability to block the formation of syncytia.     

CalDAG-GEFI Deficiency in a Family with Symptomatic Heterozygous and Homozygous Carriers of a Likely Pathogenic Variant in RASGRP2

RASGRP2 encodes the calcium and diacylglycerol (DAG)-regulated guanine nucleotide exchange factor I (CalDAG-GEFI) identified as a Rap1-activating molecule. Pathogenic variants previously identified in RASGRP2 allowed the characterization of CalDAG-GEFI deficiency as a non-syndromic, autosomal recessive platelet function disease. We report on the clinical manifestations and laboratory features of a Portuguese family with a likely pathogenic variant in RASGRP2 (c.999G>C leading to a p.Lys333Asn change in the CDC25 catalytic domain of CalDAG-GEFI) and discuss the contribution of this variant to the disease manifestations. Based on the study of this family with one homozygous patient and five heterozygous carriers and on a critical analysis of the literature, we challenge previous knowledge that CalDAG-GEFI deficiency only manifests in homozygous patients. Our data suggest that at least for the RASGRP2 variant reported herein, there is a phenotypic expression, albeit milder, in heterozygous carriers.     

Mass transfer modeling and simulation at a rotating cylinder electrode (RCE) reactor under turbulent flow for copper recovery

This work presents the numerical simulation of a laboratory reactor with rotating cylinder electrode (RCE) and a six-plate counter electrode that is used in studies on heavy metal recovery. The rate of electrode rotation and the potential applied are of such magnitude that the electrochemical reactor works in conditions of mass transport control under turbulent flow to obtain high recovery rates and formation of dendritic metal deposits. For hydrodynamics, the Reynolds averaged Navier–Stokes (RANS) equations were solved using the standard k–ε turbulence model, as well as wall functions based on the universal velocity distribution in the near-wall region. Results of 3-D simulations of the velocity field show clearly the formation of the turbulence Taylor vortex flow. For mass transfer, convection–diffusion equation was solved using the Kays–Crawford model for turbulent Schmidt number and Launder–Spalding wall functions adapted for mass transfer. Kinetics of copper recovery from aqueous solutions containing 0.019 M CuSO₄ and 1 M H₂SO₄, in the range of rotation speed of 400–1100 rpm, was adequately fit (error <8%) during the electrolysis time to achieve a final recovery of 85% for potentiostatic and 60% for galvanostatic experiments. The fitting parameter of the concentration wall function used in all experiments was A=2.9.     

Superficial modification in recycled PET by plasma etching for food packaging

An oxygen plasma treatment has been used to improve the adhesion of amorphous hydrogenated carbon (a‐C:H) films onto surfaces of recycled poly(ethylene terephthalate) (PET). Modifications produced by the oxygen plasma on the PET surface in chemical bonds and morphology were investigated by X‐ray photoelectron spectroscopy and atomic force microscopy, respectively. Contact angle measurements were used to study the changes in the surface wettability. Adhesion of the a‐C:H film onto the PET surface was investigated by the tape test method. It was observed that the improvement in film adhesion is in good correlation with the increase in surface roughness, due to plasma etching, and with the appearance of oxygen‐related functional groups at the surface. The results of this study indicate that a‐C:H‐coated recycled PET can be used in food packaging. The a‐C:H film could be used as a functional barrier to reduce or prevent migration of contaminants from the polymer to the package content. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Development of a biomimetic chitosan film-coated gold electrode for determination of dopamine in the presence of ascorbic acid and uric acid

A gold electrode surface was modified using a dinuclear copper complex [Cu^II₂ (Ldtb)(μ-OCH₃)](BPh₄) and then coated with a chitosan film. This biomimetic polymer film-coated electrode was employed to eliminate the interference from ascorbic acid and uric acid in the sensitive and selective determination of dopamine. The optimized conditions obtained for the biomimetic electrode were 0.1 M phosphate buffer solution (pH 8.0), complex concentration of 2.0 × 10⁻⁴ M, 0.1% of chitosan and 0.25% of glyoxal. Under the optimum conditions, the calibration curve was linear in the concentration range of 4.99 × 10⁻⁷ to 1.92 × 10⁻⁵ M, and detection and quantification limits were 3.57 × 10⁻⁷ M and 1.07 × 10⁻⁶ M, respectively. The recovery study gave values of 95.2-102.6%. The lifetime of this biomimetic sensor showed apparent loss of activity after 70 determinations. The results obtained with the modified electrode for dopamine quantification in the injection solution matrix were in good agreement with those of the pharmacopoeia method.     

Poly(vinylidene fluoride) with zinc oxide and carbon nanotubes applied to pressure sheath layers in oil and gas pipelines

In this work, PVDF composites containing 0.2% (m/m) of carbon nanotubes (MWCNTs), PVDF with 5.0% (m/m) of zinc oxide (ZnO), and composites containing both particles in the same contents in the matrix were melt processed in a mini-extruder machine with double screws, using the counter-rotation mode. Composites were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), dynamic-mechanical analysis (DMA), and contact angle tests (CA). The samples presented the predominance of the α phase, with an increased degree of crystallinity as well as an increase in dimensional stability by incorporating both fillers, showing a synergistic effect between these particles, as shown on FTIR, DSC, and XRD results. SEM images showed a good dispersion of high aspect ratio particles. In general, DMA and TGA analysis showed that composites had not decreased their thermal and mechanical performance when compared to neat PVDF. Results of CA analysis showed an increase in the hydrophobicity of the sample containing MWCNTs. Permeability tests were also performed using a differential pressure system, combining high temperature and pressure, obtaining permeability measures and time lag. This work presents an alternative of composite materials, suggesting its application in the internal pressure sheath layers of oil and gas flexible pipes.     

Thermal dehydrochlorination of pure PVC polymer: Part I—thermal degradation kinetics by thermogravimetric analysis

Thermal degradation of PVC occurs in two stages, with each stage subdivided into two substages. The first refers to the dehydrochlorination, where hydrochloric acid is formed, and giving polyene structures. Hitherto, the degradation mechanism and action of hydrochloric acid as a catalyst during the dehydrochlorination stage are poorly known. Recently, the importance of the tacticity has gained attention for its influence on the dehydrochlorination mechanism. The present work focused on the dehydrochlorination stage, studying the molecular structure by FTIR analysis and the kinetic parameters by TGA analysis in Nitrogen atmosphere, based on three mathematical methods: Friedman, Kissinger, and Flynn-Wall-Ozawa. The sample was a pure homopolymer obtained by suspension polymerization. The dehydrochlorination kinetics follows a first order reaction model and occurs by nucleation and growth. The dehydrochlorination begins with the loss of very labile chlorine atoms present in defective and isotactic molecular segments. The formed HCl acts as a catalyst in the degradation. Following 40% conversion, a drop in Ea is observed. After that, chlorine atoms present in syndiotactic and atactic sequences, are released and, added to the large number of polyene chain sequences, and an increase in Ea is observed up to 60% conversion, where the dehydrochlorination stage is concluded.     

The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

This work aims to investigate the effect of adding vulcanized or partially devulcanized rubbers on recycled polypropylene (PPr), considering thermomechanical and morphological properties. The study proposes to better understand how structural changes underwent by rubber (after the devulcanization) contributed to improving the mechanical properties of the PPr. The PPr/rubber blends were prepared by a co-rotating twin-screw extruder and then were injected. The blends composed of the most devulcanized rubbers by microwaves with refined microstructure showed higher values of elongation at break and toughness. Data showed that the devulcanization process applied to the rubber interfered positively in its adhesion to the PPr. Data from dynamic mechanical analysis and atomic force microscopy indicated that the most devulcanized rubbers presented an interface more connected to PPr. These chemical interactions possibly impacted the mechanical properties of the PPr. Moreover, dilatation processes favored the fracture mechanisms of the PPr when rubber was added to it.