Changes in wine yeast storage carbohydrate levels during preadaptation,rehydration and low temperature fermentations

The metabolism of glycogen and trehalose was analysed in a wine yeast strain fermenting at 25 and 13 degrees C. Trehalose and glycogen degradation were completed during the lag phase of fermentation. Ammonia was taken up rapidly and once it had been reduced to negligible amounts, the synthesis of trehalose started. Glycogen followed a similar pattern. If trehalose synthesis was taken as a stress indicator, the fermentation at 13 degrees C could not be considered stressful because the maximum concentrations are similar at both temperatures. In industrial fermentations, and after a preadaptation in grape must for several hours at 18 degrees C, the lag phase was reduced significantly, and this may be why trehalose and glycogen were completely depleted at the beginning of the low temperature fermentation. Various preadaptation conditions were tested so that their influence on trehalose and glycogen degradation could be determined. The presence of fermentable carbon sources, such as glucose or fructose, triggered the mobilisation and use of trehalose. However, just increasing the osmotic pressure did not reduce the trehalose content. No such differences were observed in glycogen metabolism.     

Siliceous spicules and skeleton frameworks in sponges: origin, diversity, ultrastructural patterns, and biological functions

Silica deposition is a fundamental process in sponges. Most sponges in the Classes Demospongiae and Hexactinellida secrete siliceous elements, which can subsequently fuse, interlock with each other, or form three-dimensional structures connected by spongin. The resulting skeletal frameworks allow sponges to grow upwards and facilitate water exchange with minimal metabolic cost. Several studies on sponge skeletogenesis have been published. We are beginning to understand the mechanisms of spicule secretion and the role of spicules and skeletal frameworks in the biology, ecology, and evolution of sponges. Molecular techniques and ecological experiments have demonstrated the genetic control of the process and the contribution of environmental factors to the expression of a sponge spicule, respectively. However, other classic topics such as the role of membranes in silicon transport or whether spicules are formed in situ or secreted anywhere in the sponge mesohyl and then transported to the skeletal framework require further investigation. We review the process of silica deposition in sponges at the molecular and cellular levels, as well as the biological and ecological functions of spicules and skeletons. The genetic control of spicule shapes makes them useful in the reconstruction of sponge phylogeny, although recent experiments have demonstrated the influence of environmental factors in modulating spicule size, shape, and the presence or absence of one or more spicule types. The implications of such variations in sponge taxonomy may be important. Besides supporting sponge cells, spicules can help larvae stay buoyant while in the plankton or reach the bottom at settlement, enhance reproduction success, or catch prey. Conversely, the role of spicules and skeletons in deterring predation has not been demonstrated. Knowledge of several aspects is still based on a single or a few species and extrapolations should be made only with caution. With the advent of new molecular techniques, new lines of research are presently open and active in this field.     

Calibration of a Continuous Simulation Fecal Coliform Model Based on Historical Data Analysis

Since 1984, the major water reclamation plants discharging to the Chicago Waterway System (CWS) have not disinfected their effluents. The possible addition of disinfection at these plants is the subject of an ongoing use attainability analysis (UAA). For the UAA, Escherichia coli (E. coli) is used as the indicator of bacterial contamination. However, only a few years of E. coli data are available for the CWS and the treatment plants discharging to the CWS. Thus, it was decided to develop a model based on fecal coliforms for which more data are available and to develop a relation between fecal coliform and E. coli counts for the CWS. A 1:1 relation was found between fecal coliform and E. coli counts in the CWS by Limnotech (2004, written communication) as part of the UAA. In order to evaluate the effects of possible disinfection measures on fecal coliform and related E. coli counts in the CWS, a simple first-order fecal coliform decay model was added to the continuous-simulation flow-water quality model DUFLOW applied to the CWS system. Due to the limited amount (monthly samples) of measured fecal coliform concentration data for the CWS, a reasonable calibration of the model would have been difficult to achieve based on the traditional trial and error method. In this paper, a new concept of model parameter estimation based on historical data analysis and its application to model calibration is presented. The fecal coliform decay rate k was estimated for every reach of the CWS based on analysis of historical data (1990–2003) between each two consecutive sampling locations and the related travel time between these stations. The fecal coliform decay rate then was determined on the basis of many years (14 years, in this case) of monthly fecal coliform samples rather than the few monthly samples taken in a typical calibration period. The results obtained indicate that the calibration process was successful, and a good match between measured and simulated fecal coliform concentrations at almost all locations along the CWS is achieved with one model run for several multiple month periods in 1998, 1999, 2001, and 2002.     

The effect of additives on the treatment of oil-in-water emulsions by vacuum evaporation

A simple batch vacuum evaporation process for the treatment of several oil-in-water (O/W) emulsions is reported. The experiments were carried out with waste emulsions from an industrial copper rolling process and with model emulsions prepared in the laboratory. No detailed information on the formulation of the industrial waste O/W emulsions was available. Several model emulsions were formulated using the same base oil (an 85–15% (w/w) mixture of a synthetic poly-α-olefin and a trimethylol propane trioleate ester, respectively) and one of the three following surfactants: Brij-76 (polyethylene glycol octadecyl ether, non-ionic), CTAB (hexadecyltrimethyl ammonium bromide, cationic), and Oleth-10 (glycolic acid ethoxylate oleyl ether, anionic). Experimental results show a strong influence of operating conditions, such as pressure or bath temperature, on the evaporation performance. As a general trend, the higher the values of these parameters, the higher the pollutant content in the obtained aqueous effluent. The presence of surfactants increase the evaporation rate, especially at low operating vacuum pressures, the solubility of oil molecules in water and the evaporation temperature of model O/W emulsions. Furthermore, COD reductions higher than 99.5% for the treated waste O/W emulsions were achieved.     

Image processing techniques in a preliminary morphometric characterization of corneal epithelium by scanning electron microscopy

Several processing techniques of digital images allowed us to quantify the percentage of cell surface covered by microprojections (microvilli or microplicae) (SCM), the adhesion between epithelial cells by the parameter intercellular junctions (IJ), the size (cell area), shape (cell shape) and shade (cell shade) of cells on the corneal epithelium of nine rabbits. The data were analyzed and the epithelial cells were classified into three groups by cluster analysis. Assuming the representativeness of the sample, our findings suggest that for a normal corneal epithelium, 80% of the cells could show SCM >41%, and IJ >0.98 (being one a cell to cell junction without disruptions). Standard deviations of cell shade lower than 21 gray levels could indicate a tendency to lose the cell shade mosaic. Normal corneas could show a majority of cells (54–69%) included in group 2 with smaller mean size (80% of cells with cell area <242 μm²), higher SCM (80% of cells with SCM >44.83%), polygonal mean shape and brighter shade. Group 1 (15–30% of cells) could show a larger mean size (80% of cells with cell area >494 μm²), lower SCM (although 80% of cells with SCM >32.61%), circular mean shape and darker electron reflex. Group 3 could display a medium mean size, higher SCM (similar to group 2), circular mean shape (similar to group 1), and brighter shade. These analyses could possibly be used to further assess the corneal response to ocular drugs, contact lens, and surgical procedures or to discriminate between pathology stages. Microsc. Res. Tech. 73:1059–1066, 2010. © 2010 Wiley‐Liss, Inc.     

Possible fatty acyl pheromone precursors in Spodoptera littoralis. Search for 11- and 12-hydroxytetradecanoic acids in the pheromone gland

Lipidic extracts of Spodoptera littoralis pheromone glands submitted to acid methanolysis using: (i) sulfuric acid/methanol/benzene (0.1∶4∶2, by vol) at 90°C for 1 h; (ii) 12 N HCl/methanol (1∶2; vol/vol) at 90°C for 1 h, or (iii) 14% BF₃-MeOH at 90°C for 1 h did not reveal the presence of either 11- or 12-hydroxytetradecanoic acid in the extracts, as concluded from the gas chromatography-mass spectrometry analyses. Under the above methanolysis conditions, a synthetic sample of methyl (14, 14, 15-²H₃) 12-hydroxytetradecanoate remained unaltered. These results may indicate that formation of (E)-11-tetradecenoic acid from tetradecanoic acid does not occur in the pheromone gland by dehydration of an intermediate hydroxyacid. Acid methanolysis of a lipidic extract using BF₃-MeOH led to the formation of a mixture of methoxy fatty acid methyl esters, identified by gas chromatography-mass spectrometry. These methoxy derivatives should arise from BF₃-catalyzed addition of methanol to the double bond of the natural monounsaturated fatty acyl derivatives present in the gland. Thus, under the same conditions, a synthetic sample of methyl (Z)-11-tetradecenoate was partially transformed into methyl 11-methoxytetradecanoate and methyl 12-methoxytetradecanoate. This reaction might be a useful alternative procedure to obtain methoxy derivatives of olefins, which are very helpful for the structural characterization of the parent alkenes.     

Bioactivity of Flavonoids on Insulin‐Secreting Cells

ABSTRACT: Flavonoids are usually found in fruits and other plant organs and therefore widely consumed. They are antioxidants, anti‐inflammatory, anticarcinogenic, and protective against coronary disease and metabolic disorders. These beneficial effects make them good candidates for the development of new functional foods with potential protective/preventive properties against several diseases. We must consider that this fact could lead to a higher intake of some of these flavonoids. Most of the studies concerning their beneficial effects showed peripheral activity of these molecules, but there is no clear information about their central effects on a key organ on metabolic control: the endocrine pancreas. The pancreas has an endocrine function of major importance to regulate nutrient metabolism, such as control of glucose homeostasis via insulin and glucagon secretion. Its importance in whole body nutrient equilibrium is highlighted by the fact that several pathologies, such as type 1 and/or 2 diabetes, are related at some point to a pancreatic cell deregulation. In this review, we compile the most relevant results concerning the effects of flavonoids on several aspects of pancreatic functionality. Studies using animals with drug‐induced diabetes support the hypothesis that flavonoids can ameliorate this pathogenesis. The great diversity of flavonoid structures makes it difficult to establish common effects in the pancreas. Published data suggest that there might be direct effects of flavonoids on insulin secretion, as well as on prevention of beta‐cell apoptosis, and they could even act via modulation of proliferation. The mechanisms of action involve mainly their antioxidant properties, but other pathways might also take place.     

An approximate elastoplastic analysis of the effect of plane strain at the surface of a notch

An approximate elastoplastic analysis of a notch in plane strain is developed using an extended Neuber approach. The multiaxial stress/strain state at the notch surface is dependent upon a parameter which is readily obtained from the numerical solution of a transcendental equation for each level of the net section stress. Excellent agreement with the results of a finite element analysis of a double-edge-notched specimen was obtained.     

Applying Projection‐Based Methods to the Asymmetric Traffic Assignment Problem

This article examines the application of a path‐based algorithm to the static and fixed demand asymmetric traffic assignment problem. The algorithm is of the simplicial decomposition type and it solves the equilibration or master problem step by means of five existing projection methods for variational inequality problems to evaluate their performance on real traffic networks. The projection methods evaluated are: (1) a cost approximation‐based method for minimizing the Fukushima's gap function, (2) the modified descent method of Zhu and Marcotte ( 1988 ), (3) the double projection method of Khobotov ( 1987 ) and three of its recently developed variants (Nadezhkina and Takahashi, 2006 ; Wang et al., 2010 ; and He et al., 2012); (4) the method of Solodov and Svaiter ( 1999 ); and (5) the method of Solodov and Tseng ( 1996 ). These projection methods do not require evaluation of the Jacobians of the path cost functions. The source for asymmetries are link costs with interactions, as in the case of priority ruled junctions. The path‐based algorithm has been computationally tested using the previous projection methods on three medium to large networks under different levels of congestion and the computational results are presented and discussed. Comparisons are also made with the basic projection algorithm for the fixed demand asymmetric traffic assignment problem. Despite the lack of monotonicity properties of the test problems, the only method that failed to converge under heavy congestion levels was the basic projection algorithm. The fastest convergence was obtained in all cases solving the master problem step using the method of He et al. (2012), which is a variant of Khobotov's method.     

Concentrations and patterns of organochlorine pesticides and PCBs in Mediterranean monk seals (Monachus monachus) from Western Sahara and Greece

Blubber from Mediterranean monk seals (Monachus monachus) from the Western Sahara coast (Atlantic), sampled during 1996-1999, and from the Greek coast (Mediterranean), sampled during 1995-1999, was analyzed for organochlorine pollutants (OCs). In both populations, no significant difference was found between sexes. In the Atlantic population, mature females presented greater percentages of higher chlorinated PCB (polychlorinated biphenyl) congeners in relation to total PCBs (sum of 25 congeners) than pups, indicating a differential transfer of PCB congeners through lactation. In the Mediterranean, the reduced sample size of adult individuals precluded proper statistical investigation of age-related variation. Significant differences in concentrations and pollutant patterns were found between populations. Thus, Mediterranean individuals presented significantly higher levels of HCB (hexachlorobenzene), tPCB, and DDTs (dichlorodiphenyltrichloroethane) concentrations and DDE/tDDT and tDDT/tPCB ratios than their counterparts from the Atlantic. Moreover, the relative proportion of different congeners in relation to the total PCB load (congener/tPCB) was also different between the two areas. The 100*tDDT/tPCB ratio in Atlantic seals was 38.46, which indicates a predominance of industrial inputs over those associated with agriculture. Conversely, in the Mediterranean seal population, the 100*tDDT/tPCB ratio was 177.1, denoting a proportionally higher contribution of pollutants of agricultural origin.