Verbesserung der Floating-Liner Methode zur Messung der Kolbengruppenreibung durch Einsatz doppelschrägverzahnter Zahnriemen

Forschung im Ingenieurwesen - Die mechanischen Verluste von Verbrennungsmotoren hängen maßgeblich von den auftretenden Reibkräften innerhalb der Kolbengruppe ab. Da die Kolbengruppe...     

Large-scale parallel arrays of silicon nanowires via block copolymer directed self-assembly

Extending the resolution and spatial proximity of lithographic patterning below critical dimensions of 20 nm remains a key challenge with very-large-scale integration, especially if the persistent scaling of silicon electronic devices is sustained. One approach, which relies upon the directed self-assembly of block copolymers by chemical-epitaxy, is capable of achieving high density 1?:?1 patterning with critical dimensions approaching 5 nm. Herein, we outline an integration-favourable strategy for fabricating high areal density arrays of aligned silicon nanowires by directed self-assembly of a PS-b-PMMA block copolymer nanopatterns with a L(0) (pitch) of 42 nm, on chemically pre-patterned surfaces. Parallel arrays (5 × 10(6) wires per cm) of uni-directional and isolated silicon nanowires on insulator substrates with critical dimension ranging from 15 to 19 nm were fabricated by using precision plasma etch processes; with each stage monitored by electron microscopy. This step-by-step approach provides detailed information on interfacial oxide formation at the device silicon layer, the polystyrene profile during plasma etching, final critical dimension uniformity and line edge roughness variation nanowire during processing. The resulting silicon-nanowire array devices exhibit Schottky-type behaviour and a clear field-effect. The measured values for resistivity and specific contact resistance were ((2.6 ± 1.2) × 10(5)Ωcm) and ((240 ± 80) Ωcm(2)) respectively. These values are typical for intrinsic (un-doped) silicon when contacted by high work function metal albeit counterintuitive as the resistivity of the starting wafer (～10 Ωcm) is 4 orders of magnitude lower. In essence, the nanowires are so small and consist of so few atoms, that statistically, at the original doping level each nanowire contains less than a single dopant atom and consequently exhibits the electrical behaviour of the un-doped host material. Moreover this indicates that the processing successfully avoided unintentional doping. Therefore our approach permits tuning of the device steps to contact the nanowires functionality through careful selection of the initial bulk starting material and/or by means of post processing steps e.g. thermal annealing of metal contacts to produce high performance devices. We envision that such a controllable process, combined with the precision patterning of the aligned block copolymer nanopatterns, could prolong the scaling of nanoelectronics and potentially enable the fabrication of dense, parallel arrays of multi-gate field effect transistors.     

Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions

Repair of composite structures and the impact of demanding environmental conditions is a crucial issue for the aircraft industry because of the increasing use of composites in modern aircraft. Consequently, the impact of environmental conditions common for aircraft applications on repair specimens in comparison to nonrepaired specimens is studied. All specimens are produced from a woven carbon fiber-reinforced epoxy-based prepreg. For the repair-specimens, an epoxy-based film adhesive is used for the soft patch repair approach. During the repair process, the surface of the precured prepreg is prepared by a mechanical method (sanding) and an additional chemical functionalization, respectively. Moisture absorption of the repair specimens is independent of the surface preparation method and higher for the repaired than for the nonrepaired specimens. The key influencing environmental conditions for the tensile strength and the failure mode of the repair specimens are elevated temperature testing as well as hot/wet conditioning and conditioning in deionized water. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47506.     

Alteration of the Route to Menaquinone towards Isochorismate-Derived Metabolites

Chorismate and isochorismate constitute branch-point intermediates in the biosynthesis of many aromatic metabolites in microorganisms and plants. To obtain unnatural compounds, we modified the route to menaquinone in Escherichia coli. We propose a model for the binding of isochorismate to the active site of MenD ((1R,2S, 5S,6S)-2-succinyl-5-enolpyruvyl-6-hydroxycyclohex-3-ene-1-carboxylate (SEPHCHC) synthase) that explains the outcome of the native reaction with α-ketoglutarate. We have rationally designed variants of MenD for the conversion of several isochorismate analogues. The double-variant Asn117Arg–Leu478Thr preferentially converts (5S,6S)-5,6-dihydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHD), the hydrolysis product of isochorismate, with a >70-fold higher ratio than that for the wild type. The single-variant Arg107Ile uses (5S,6S)-6-amino-5-hydroxycyclohexa-1,3-diene-1-carboxylate (2,3-trans-CHA) as substrate with >6-fold conversion compared to wild-type MenD. The novel compounds have been made accessible in vivo (up to 5.3 g L⁻¹). Unexpectedly, as the identified residues such as Arg107 are highly conserved (>94 %), some of the designed variations can be found in wild-type SEPHCHC synthases from other bacteria (Arg107Lys, 0.3 %). This raises the question for the possible natural occurrence of as yet unexplored branches of the shikimate pathway.     

Fouling Detection in an Optically Accessible Microstructured Heat Exchanger

The application of highly effective microstructured devices in continuous production and industrial environments is frequently prone to fouling. A new method is presented to characterize fouling in these microstructures. Thermal fouling of aqueous solutions containing whey protein were used as a test system. Different fouling effects could be observed and distinguished. Integral fouling indicators, such as thermal fouling resistance and pressure drop, as conventional criteria for the occurrence of fouling were compared with direct local optical observation. Low thermal fouling resistances could be detected.     

Modeling and in-depth analysis of the start-up of dividing-wall columns

Saving potentials of up to 30% in capital and operating costs are the driving forces behind the increase in the application of dividing-wall columns in industry. However, a lack of knowledge still exists when dealing with the start-up of dividing-wall columns, which is inherently a strongly nonlinear process. Here, for the first time the start-up of dividing-wall columns is explored, where the starting point is an empty column at ambient conditions. A model is presented which is capable of predicting the dynamic discrete-continuous changes which are characteristic of dividing-wall columns. The proposed process model takes into account the heat transfer across the dividing wall as well as the vapor distribution below the dividing wall. The degree of accuracy of the model is clearly determined by comparing different simplifications, e.g. a constant vapor distribution ratio equal to the steady-state value. The detailed studies were carried out with strict product specifications so that the influence of process parameters could be quantified. The rigorous process model and the obtained simulation results presented in this study provide a promising basis for developing and applying optimal start-up policies for dividing-wall columns.     

An Experimental Workflow for Studying Barrier Integrity,Permeability, and Tight Junction Composition and Localization in a Single Endothelial Cell Monolayer: Proof of Concept

Endothelial and epithelial barrier function is crucial for the maintenance of physiological processes. The barrier paracellular permeability depends on the composition and spatial distribution of the cell-to-cell tight junctions (TJ). Here, we provide an experimental workflow that yields several layers of physiological data in the setting of a single endothelial cell monolayer. Human umbilical vein endothelial cells were grown on Transwell filters. Transendothelial electrical resistance (TER) and 10 kDa FITC dextran flux were measured using Alanyl-Glutamine (AlaGln) as a paracellular barrier modulator. Single monolayers were immunolabelled for Zonula Occludens-1 (ZO-1) and Claudin-5 (CLDN5) and used for automated immunofluorescence imaging. Finally, the same monolayers were used for single molecule localization microscopy (SMLM) of ZO-1 and CLDN5 at the nanoscale for spatial clustering analysis. The TER increased and the paracellular dextran flux decreased after the application of AlaGln and these functional changes of the monolayer were mediated by an increase in the ZO-1 and CLDN5 abundance in the cell–cell interface. At the nanoscale level, the functional and protein abundance data were accompanied by non-random increased clustering of CLDN5. Our experimental workflow provides multiple data from a single monolayer and has wide applicability in the setting of paracellular studies in endothelia and epithelia.     

Killing Me Softly—Future Challenges in Apoptosis Research

The induction of apoptosis, a highly regulated and clearly defined mode of cell dying, is a vital tenet of modern cancer therapy. In this review we focus on three aspects of apoptosis research which we believe are the most crucial and most exciting areas currently investigated and that will need to be better understood in order to enhance the efficacy of therapeutic measures. First, we discuss which target to select for cancer therapy and argue that not the cancer cell as such, but its interaction with the microenvironment is a more promising and genetically stable site of attack. Second, the complexity of combination therapy is elucidated using the PI3-K-mediated signaling network as a specific example. Here we show that the current clinical approach to sensitize malignancies to apoptosis by maximal, prolonged inhibition of so-called survival pathways can actually be counter productive. Third, we propose that under certain conditions which will need to be clearly defined in future, chronification of a tumor might be preferable to the attempt at a cure. Finally, we discuss further problems with utilizing apoptosis induction in cancer therapy and propose a novel potential therapeutic approach that combines the previously discussed features.