Experimental investigation on the mean drop size and drop size distribution in an L-shaped pulsed sieve-plate column

Vertical pulsed extraction columns cannot be employed in applications with height limitations. On the other hand, the horizontal extraction columns have low throughput, which affects their applicability in industrial applications. Therefore, there is a need to design a new type of extractors for such circumstances. In this paper, an experimental study on drop sizes has been implemented in a novel L-shaped pulsed sieve-plate extraction column in the absence and presence of mass transfer. Moreover, new correlations are developed for prediction of the mean drop size and size distribution using the log-normal probability density function.     

Cyclic invariance for discrete time-delay systems

This technical communique introduces a new concept of set invariance with respect to linear discrete time dynamics affected by delay. We are interested in the definition and characterization of sequences of cyclically invariant subsets in the state space. The algebraic conditions established in the late ’80s for linear dynamics are generalized to invariance analysis in the presence of delays for given sequences of polyhedral sets.     

Material and velocity effects on cavitation erosion pitting

Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel in the velocity range 45–90 m/s at a constant cavitation number. The test section was made of a straight nozzle 16 mm in diameter discharged into the radial 2.5 mm space between two flat walls. Cavitation appears in the form of a toroidal cavity attached to the nozzle exit and damage on the samples facing the nozzle is concentrated in a circular ring centered in the cavity closure region. The exposure time was adjusted to avoid pit overlapping. The material surface was examined using a conventional contact profilometer which allowed us to identify the pits, count them, and measure their main characteristics such as depth, surface area, and volume. From these the pitting rate, the coverage rate, and the depth of deformation rate were defined. Pits were classified according to their diameter. For all materials and operating conditions, pitting rate appears to follow an exponential law in relation to the pit diameter. This law depends upon two parameters only, which were identified as the coverage time τ (i.e. the time required for the surface to be covered by erosion pits) and a characteristic pit diameter δ, which corresponds to the pits whose contribution to the coverage process is the highest. Scaling laws for pitting were derived accounting for both material properties and flow velocity, and a procedure to make pitting test results non-dimensional is proposed. The influence of the material on pitting test results was analyzed. It is shown that the damage is not correlated in simple terms with the elastic limit determined from conventional tensile tests and it is conjectured that other parameters such as the strain rate might play a significant role and should be included in the analysis. The effect of flow velocity on both parameters τ and δ was analyzed and a classical power law was found for the influence of the flow velocity on pitting rate for all three materials. Finally, some analysis and discussion is given concerning distributions of pit volume and pit depth.     

Core–shell structured Cu@Pt nanoparticles as effective electrocatalyst for ethanol oxidation in alkaline medium

Core–shell nanoparticles of Cu@Pt/C electrocatalysts were synthesized using various Pt:Cu atomic ratios with NaBH₄ as a reducing agent. The crystal structure and surface morphology were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The incorporation of copper in Cu@Pt/C electrocatalysts was found to shift all Pt diffraction planes in the negative direction with expanding the crystal lattice dimensions. The electrocatalytic activity of various Cu@Pt/C electrocatalysts was investigated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Cu@Pt/C electrocatalysts containing Pt:Cu atomic ratios of 1:0.5 and 1:2 showed an enhanced electrochemical performance for ethanol oxidation when related to Pt/C.     

Novel composite membrane based on zirconium phosphate-ionic liquids for high temperature PEM fuel cells

Composite membranes composed of zirconium phosphate (ZrP) and imidazolium-based ionic liquids (IL), supported on polytetrafluoroethylene (PTFE) were prepared and evaluated for their application in proton exchange membrane fuel cells (PEM) operating at 200 °C. The experimental results reported here demonstrate that the synthesized membrane has a high proton conductivity of 0.07 S cm^?1, i.e, 70% of that reported for Nafion. Furthermore, the composite membranes possess a very high proton conductivity of 0.06 S cm^?1 when processed at 200 °C under completely anhydrous conditions. Scanning electron microscopy (SEM) images indicate the formation of very small particles, with diameters in the range of 100–300 nm, within the confined pores of PTFE. Thermogravimetric analysis (TGA) reveals a maximum of 20% weight loss up to 500 °C for the synthesized membrane. The increase in proton conductivity is attributed to the creation of multiple proton conducting paths within the membrane matrix. The IL component is acting as a proton bridge. Therefore, these membranes have potential for use in PEM fuel cells operating at temperatures around 200 °C.     

A new manufacturable filter design approach for spectral reflectance estimation

Selection of the best possible filter set among a set of available filters is the obvious method of increasing dimension of camera signals for spectral reflectance reconstruction. There are also methods that are focusing on the filter design regardless of noticing to the constructability of the designed filters. This study shows that direct optimization of physical variables of filter manufacturing technique is more reliable than indirect approach of designing and then physical manufacturing of the designed filters. Direct optimization of the transmission‐controlling primaries in filter manufacturing process would guarantee having the designed filters in reality. Combination of some solvent dyes was used as the spectral transmission matching system for filter manufacturing. As a conventional technique, filters were designed and best possible dye concentrations that match the desired filters were calculated. As an alternative approach, filters were also designed using direct optimization of dyes concentrations. The results showed that direct optimization of dye concentrations exhibits better performance in comparison with the conventional technique. © 2016 Wiley Periodicals, Inc. Col Res Appl, 42, 316–326, 2017     

Granulometry,cluster analysis and spatial distribution of manganese contaminated soils,Kgwakgwe, southeastern Botswana

The particle size distribution (PSD) of 400 Mn contaminated soil samples was established, and generated data were statistically analysed and spatially presented. The PSD for the 53 µm – 4 µm size fraction soil samples ranged from 11.05 to 100 wt %, whereas that for < 4 µm was from 0.3 to 30 wt %. Texturally, samples were dominantly silt loam, although silt and sandy loam were also present, as well as loam, loamy sand and clay classes. Six clusters were identified with cluster one being the most dominant occurring in sandy loam, silt loam and loamy sand. The < 53 µm fraction had three dominant areas, and the < 4 µm fraction had several unevenly presented populations as reflected in the maps. Because of its spatial distribution, the < 4 µm fraction may pose hazards to human health. Furthermore, predominance of Mn limits land use to subsistence agriculture with possibly low crop yield.     

On estimating the interface normal and curvature in piecewise linear interface calculation-volume of fluid approach for three-dimensional arbitrary meshes

Volume of fluid (VOF) method with its Piecewise Linear Interface Calculation (PLIC) reconstruction algorithm is one of the most popular approaches in numerical simulation of interfacial flows with a wide range of applications in different areas. In an effort to evaluate the similarity of the PLIC-generated planes in comparison with the exact interface, a point-cloud, based on the polygon centers of PLIC planes is extracted, which later is used to form a triangular grid that represents the estimated interface. The main objective of this article is to evaluate the interface geometrical properties based on the extracted triangular grid of the interface. The methods presented in this article, characterized by a higher spatially convergence ratio, are compared with the commonly used methods. The proposed methods are tested for two 3-dimensional general test cases, where an evident improvement is seen in calculation accuracy and spatial convergence of the errors of interface normal vector and curvature.     

Effect of B2O3 addition on structure and properties of Yb3+/Al3+/B3+-co-doped silica glasses

The homogeneous Yb³⁺/Al³⁺/B³⁺-co-doped silica glasses were prepared via a sol-gel method. The impact of B₂O₃ addition on the physical and optical properties and network structure was systematically studied. The network structure was investigated by the Fourier Transform Infrared (FT-IR), Raman spectra, and Solid State Nuclear Magnetic Resonance (SSNMR). Herein, B₂O₃ addition can continuously decrease the refractive index and density. When B₂O₃ is lower than 2 mol%, B₂O₃ addition can obviously decrease the scalar crystal field parameters, Yb³⁺ asymmetry degree, Yb³⁺ cross-sections, due to the generation of Yb–O–B bonds at the cost of partial Yb–O–Al/Si ones. When B₂O₃ is more than 2 mol%, FT-IR, Raman spectra, and SSNMR results indicate that further increased B atoms prefer to connect with Si and Al rather than Yb. Consequently, the above parameters are basically unchanged. Based on the results, an intuitive model of structure and properties evolution during the substitution of SiO₂ by B₂O₃ has been established.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.