A model material approach to the study of fracture process zone of quasi-brittle materials

A new approach to study the fracture of quasi-brittle materials is introduced: the design and testing of model materials. By model material is understood a material with enlarged microstructure and which material parameters, such as stacking and mechanical properties of particles and cohesion force, can be fully controlled. In this paper a first example to the model materials approach is presented, consisting in 5 mm steel particles bonded in a precise stacking with an epoxy-based glue. It is shown how it is possible to correlate the different fracture mechanisms and ultimate peak load of the model material to the particle pair force and to the fracture process zone size. It is also seen how a quasi-brittle behaviour is produced in the presence of mechanisms that induced the crack to shift fracture planes, that is, in presence of energy dissipative mechanisms.     

Iterative method for the design of DFT filter Bank

Multirate adaptive filters have numerous advantages such as low computational load, fast convergence, and parallelism in the adaptation. Drawbacks when using multirate processing are mainly related to aliasing and reconstruction effects. These effects can be minimized by introducing appropriate problem formulation and employing sophisticated optimization techniques. In this paper, we propose a formulation for the design of a filter bank which controls the distortion level for each frequency component directly and minimizes the inband aliasing and the residual aliasing between different subbands. The advantage of this problem formulation is that the distortion level can be weighted for each frequency depending on the particular practical application. A new iterative algorithm is proposed to optimize simultaneously over both the analysis and the synthesis filter banks. This algorithm is shown to have a unique solution for each iteration. For a fixed distortion level, the proposed algorithm yields a significant reduction in both the inband aliasing and the residual aliasing levels compared to existing methods applied to the numerical examples.     

Structure determination of CaMgGeO4

The crystal structure of CaMgGeO₄ is described. CaMgGeO₄, M_r = 200.9, orthorhombic, Pnam, A = 11.285(5) Å, B = 5.016(2) Å, C = 6.435(2) Å, V = 364.36 ų, Dx = 3.664 Mg/m³.λ(MoK_a = 0.71069 Å, F(000) = 384, room temperature, final R = 0.045 for 1752 observed reflections. The structure is isomorphous with CaMgSiO₄ (monticellite).     

Energy efficiency, carbon emissions and economic development in Venezuela

Venezuela's vast natural resource base has largely shaped the nation's economic and energy-use patterns. Major opportunities exist for improving the efficiency of energy use in Venezuela and, consequently, restraining the growth of energy-related carbon emissions. This paper presents a detailed report of one potential development path for Venezuela and estimates the ensuing levels of energy demand and CO₂ emissions associated with pursuing this path through the year 2025. The results indicate that by adopting a development strategy that incorporates structural changes in the economy, fuel-switching measures and improved end-use efficiencies, Venezuela can introduce energy efficiency and carbon restraints as part of its economic development process.     

Experiments of Fast Learning with High Order Boltzmann Machines

This work reports the results obtained with the application of High Order Boltzmann Machines without hidden units to construct classifiers for some problems that represent different learning paradigms. The Boltzmann Machine weight updating algorithm remains the same even when some of the units can take values in a discrete set or in a continuous interval. The absence of hidden units and the restriction to classification problems allows for the estimation of the connection statistics, without the computational cost involved in the application of simulated annealing. In this setting, the learning process can be sped up several orders of magnitude with no appreciable loss of quality of the results obtained.     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Multi-level simulation of metal-forming processes

The IBF has for some years made use of finite element programmes to solve metal-forming problems. In the course of this investigation, it has become evident that a problem-oriented adaptation of FEM simulation to the problem in hand is beneficial in terms of computation effort. The computation time for the process parameters is optimised in a multi-level simulation. At level 1 (global analysis) integral parameters such as the required force and required work are computed using a coarse FEM mesh. At level 2 (local analysis) an optimised number of elements is used to determine continuum mechanics parameters like stress, strain and temperature. Microscopic phenomena are simulated at level 3 (microscopic analysis), using special micro-material elements and thermodynamic models.     

Transient operation of a catalytic liquid-liquid plug flow reactor for kinetics measurements

A centrifugal partition chromatograph (CPC) was used as a liquid-liquid catalytic reactor for the isomerisation of hexen-3-ol into ethylpropylketone with a water soluble rhodium catalyst. Global mass transfer coefficients were measured and shown to depend on both the nature of the solute and the flow rate. Liquid-liquid partition isotherms were also determined with the CPC using elution chromatography. Finally, a reactor model was derived to account for the experimental results obtained both under stationary and transient (pulse) conditions. A parameter sensitivity evaluation is also presented.