Capillary electrophoretic determination of acetic acid and trifluoroacetic acid in synthetic peptide samples

Synthetic peptide samples may contain counter-ions such as acetate or trifluoroacetate as a result of their method of preparation. Furthermore, because acetic acid (HOAc) and trifluoroacetic acid (TFA) are frequently used reagents in peptide synthesis, these acids may be found in synthetic peptide samples as impurities. This paper describes a method validation to determine HOAc and TFA in synthetic peptide samples by capillary electrophoresis (CE) using an internal standard (I.S.) with indirect UV detection. Typical analytical parameters such as precision, linearity, accuracy, specificity, limit of detection and ruggedness were evaluated during the validation. In addition, the contents of HOAc and TFA in two synthetic opioid peptide samples, TIPP[psi] and Orphanin FQ, were determined using the validated method. A unique feature of the method is that it offers determination of both acids in a single assay using a common I.S. The method is very efficient because of relatively short electrophoretic migration times (typically 2 to 8 min) for the acids investigated. This paper also discusses the factors that affect precision in a CE assay.     

Vertebral artery trauma

The developmental consequences of paternal exposure to acrylamide (50 mg/kg i.p. for 5 days) were assessed in preimplantation embryos. There was a significant increase in the proportion of morphologically abnormal embryos after postmeiotic treatment during spermatogenesis (88.7% vs. 14.8% in control). Abnormal embryos had an average of 1.8 +/- 3.5 cells and > 80% had at least one fragmented nucleus. In addition, morphologically normal embryos were significantly delayed (34.3 +/- 12.8 cells per embryo vs. 57.6 +/- 15.7 in control, P < 0.001). Acrylamide caused 10- and 20-fold increases in frequencies of cells with micronuclei (MN) in morphologically normal and abnormal embryos, respectively (41 and 93 MN per 1,000 cells). Both centromere-negative (MN-) and centromere-positive (MN+) were induced. Nuclei of abnormal embryos were significantly larger (900 microm2 vs. 250 microm2) than controls. In addition, MN of abnormal embryos were larger than those of normal embryos (21.2 microm2 vs. 6.5 microm2, P < 0.01). Among control embryos, MN+ were significantly larger than MN- (P < 0.05). These findings suggest that the preimplantation embryo is a sensitive indicator of paternally transmitted effects on early development. Multiple mechanisms appear to be involved, including cytogenetic damage, proliferation arrest/delay, and fertilization failure. Future studies are needed to establish how induced cytological defects in preimplantation embryos contribute to birth defects and other postimplantation abnormalities.     

Photonic transport network OAM technologies

The optical path concept was proposed to realize ubiquitous B-ISDN. It can make quantum leaps in both transmission capacity and cross-connect throughput simultaneously by exploiting WDM (wavelength division multiplexing) transmission and the wavelength routing capabilities of paths. Since the optical path is a new concept, new operation and management (OAM) systems and related technologies need to be developed before it can be fully utilized. This article discusses some of the key OAM-related issues and identifies the technical points necessary for future developments. The issues include optical path realization technologies, optical path accommodation design problems, a newly proposed optical transport network layer architecture, and the optical transport module for the network node interface     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Study on purple pigmentation in five cases with purple urine bag syndrome

We reported five patients with purple urine bag syndrome (PUBS). Four patients had indicanuria, and, in three of them, purple pigmentation was reproduced by inoculating urinary isolates, in the broth with indoxyl sulfate. Klebsiella pneumoniae, Pseudomonas aeruginosa and Enterococcus avium were considered to produce the purple pigment in three patients. However, attempts to reproduce the purple pigment failed in two patients, and one of them did not have indicanuria. These results suggest that indicanuria is not necessarily required for the development of PUBS.