3D and simplified pseudo-2D modeling of single cell of a high temperature solid oxide fuel cell to be used for online control strategies

In the current study, a single cell of a planar SOFC is firstly modeled in 3D using commercial SOFC module of ANSYS Fluent and the results are validated against the experimental investigations in the literature. Many researchers have used ANSYS Fluent for simulating solid oxide fuel cells. However, there is a huge gap in the literature on explaining the detailed procedure that should be followed in order to use this software effectively. A thorough step-by-step approach is presented to provide a deep insight into the software. Thereafter, a simplified quasi-2D method with infinitely shorter computational time is developed and the results are compared with the 3D model. It is found that the reduced model is capable of being utilized as an alternate method for both online diagnosis and designing active control strategies.     

Fabrication and characterization of highly efficient three component CuBTC/graphene oxide/PSF membrane for gas separation application

Metal organic frameworks (MOFs) with marvelous properties have aroused enormous attention for different application especially gas adsorption and separation. In this regard, fabrication of MOF hybrids with carbon based materials is new strategy to upgrade MOF performance. In this study CuBTC (Copper benzene-1,3,5-tricarboxylic acid)/graphene oxide (GO) composite was synthesized and characterized by BET, SEM, TGA, XRD and FT-IR techniques. Then CuBTC and CuBTC/GO composite were incorporated into polysulfone (PSF) polymer to construct mixed matrix membranes (MMMs). The obtained membranes were characterized by SEM, TGA, XRD and tensile tests and their gas permeability was measured. The results were compared to those of CuBTC/PSF MMMs. It was revealed that CuBTC/GO composite as filler showed superior performance relative to CuBTC. For instance, 15 wt% loading of CuBTC/GO in PSF represented outstanding gas separation behavior while the same loading of CuBTC in PSF deteriorated performance of MMM. Well particle dispersion and favorable polymer-filler interaction were responsible for such observed difference. A high H₂/CH₄ and H₂/N₂ selectivity of 80.03 and 70.46 were recorded for CuBTC/GO in PSF (15 wt%) compared to 44.56 and 40.92 for CuBTC in PSF (15 wt%).     

Association products and conformations of salt-dissociated and acid-extracted histones. A two-phase procedure for isolating salt-dissociated histones

We present an extremely rapid and efficient method for the separation of salt-dissociated histones from DNA in which the macromolecular components of chicken erythrocyte chromatin are partitioned in a two-phase system of the water-soluble, nonionic polymers, poly(ethylene glycol) and dextran. We have compared the association products and conformations of salt-dissociated histones purified with the two-phase procedure and histones that had been extracted with 0.4 M H2SO4. In the gel chromatography system of D. R. vander Westhuyzen and C. von Holt (1971), FEBS Lett. 14, 333-337] the association products of salt-dissociated and acid-extracted histones are indistinguishable. Furthermore, the circular dichroism spectra of histones prepared with the two methods are identical within experimental error. These results indicate that histones extracted, with sulfuric acid can adopt conformations at least very similar to those of salt-dissociated preperties of total erythrocyte histones are the same in 2 M NaCl as those of these histones bound to DNA in chromatin in 1 mM Tris-Cl (pH 7.5). This result and the studies of Weintraub et al. [Weintraub, H., Palter, K., and Van Lente, F. (1975), Cell 6, 68-110] on the patterns of tryptic digest products of histones strongly suggest that in 2 M NaCl the histones exist in conformations very similar to their conformations when bound to DNA. The concept of native histone conformations is discussed in light of our results.     

Big and little forms of osteoclast activating factor

We have further characterized osteoclast activating factor (OAF) using a bioassay for bone resorption which utilizes the release of previously incorporated (45)Ca from fetal rat long bones in organ culture. When supernatant media from activated leukocyte cultures were concentrated on Amicon PM10 membranes (assigned molecular weight cutoff 10,000 daltons) and chromatographed on Sephadex G-50 columns, the bone-resorbing activity eluted between the molecular weight markers chymotrypsinogen (25,000 daltons) and cytochrome c (12,500 daltons). This peak of biological activity has been called big OAF. When filtrates from the PM10 membranes were concentrated on Amicon UM2 membranes (assigned molecular weight cutoff 1,000 daltons) and chromatographed on Sephadex G-50 columns, some of the biological activity eluted between the molecular weight markers chymotrypsinogen and cytochrome c (big OAF), but there was a separate peak of biological activity which eluted with [(3)H]proline (140 daltons). This second peak has been called little OAF. Little OAF was eluted from Bio-Gel P6 columns between the molecular weight markers calcitonin (approximately 3,500 daltons) and vitamin B(12) (1,330 daltons), but was retained by Spectrapor dialysis tubing (nominal molecular weight cutoff 3,500 daltons). Big OAF was converted to little OAF by equilibration in 1 M NaCl or 2 M urea. Little OAF was self-associated back to big OAF by equilibration in buffers of low ionic strength (Tris-HCl 10-50 mM). Little OAF was extracted into the organic phase in ethyl acetate after acidification of the sample to pH 3.5. The biological activity remained in the aqueous phase after ethyl acetate extraction at pH 7.5-8.4. Little OAF has been purified more than 6,000-fold compared with the original material so that bone-resorbing activity is maximal in a sample with a protein concentration of 80 ng/ml.     

Single lead acetate insult, testosterone therapy, and erythropoiesis in mice

Lead acetate (PbAc) was tested for its effects on the production and release of erythrocytes-that is, erythropoiesis-in ICR mice. Dose-survival data indicate that a dosage of 20 mg PbAc/100 g body weight represents the maximum tolerable treatment level. No differences in survival at the various levels of the salt were observed with regard to sex or age. For erythropoietic effects of PbAc, mice were injected on day O, and radioiron (59Fe) incorporation percentages were determined at daily intervals through day 8 for both erythrocytes and splenic tissue. Control mice received isotonic saline as the injectate. On day 3, the percentages obtained from PbAc-treated mice showed a decline, reaching their minimum value by day 4. Recovery from erythropoietic suppression appeared to be complete by day 6 or 7; no positive overshoots in 59Fe percentages were found following recovery. These trends were typical for both peripheral red blood cells and spleen. Testosterone was administered to mice receiving saline or PbAc on two consecutive days (days -1 and O). Radioiron uptake percentages for females receiving testosterone and saline showed an abrupt increase on day 4. No accelerative effect due to testosterone was found in recipient males. For females treated with testosterone and PbAc, the radioiron percentages for erythrocytes and spleen paralleled those for females receiving saline only. Male mice treated with both androgen and PbAc demonstrated 59Fe percentages typical of males treated with PbAc alone.     

Describing a strategy to estimate the CO2-heavy oil minimum miscibility pressure based on the experimental methods

To measure MMP, slim tube method is time consuming, especially for heavy oils. In this study, a strategy is considered to measure the MMP in one of the Iranian heavy oil reservoirs. The strategy steps were done through; partial data of slim tube, coupling numerical model (CNM), full slim tube, and VIT test. The results showed that CNM technique with two experimental data obtains the MMP value faster than running a full slim tube with low error result. However, VIT determined MMP faster and its results illustrated that miscibility pressure for heavy oil occurs at zero IFT, unlike light oils.     

Hybrid solar parabolic dish power plant and high‐temperature phase change material energy storage system

In this study, a conventional steam power plant with two regenerative boilers is considered, and one of its boilers is replaced with parabolic solar dish collectors and storing the produced thermal energy by the phase change material (PCM) in a storage tank. The results show the necessity of the existence of an auxiliary fired‐gas boiler to provide constant load during the whole 24 hours. The performance of the proposed hybridized system is evaluated through energy and exergy analyses. It was demonstrated that substituting solar collectors with one of the boilers marginally lowers the energy efficiency but increases the exergy efficiency of the whole power plant up to 41.76%. Moreover, it is found out that this hybridization decreases the total irreversibility of the power plant in comparison with the base case, from 51.1 to 47.2 MW. The parametric analysis states that raising the mass flow rate of the heat transfer fluid in the solar collectors not only enhances the system performance but also increases the volume of the PCM tank.     

Effects of starter protein content and alkali processing of wheat straw on growth,ruminal fermentation,and behavior in Holstein calves

The present study was conducted to investigate the effects of crude protein (CP) content of starter feed and wheat straw (WS) processing on growth performance, digestibility, ruminal fermentation, and behavior of Holstein calves. Sixty calves (28 male and 32 female) were randomly assigned to 1 of 4 treatments in a randomized complete block design. Treatments in a 2 × 2 factorial arrangement were (1) lower-CP ground starter feed mixed with alkali-processed WS (LP-PWS), (2) lower-CP ground starter feed mixed with unprocessed WS (LP-WS), (3) higher-CP ground starter feed mixed with alkali-processed WS (HP-PWS), and (4) higher-CP ground starter feed mixed with unprocessed WS (HP-WS). Wheat straw was fed at 4.75% of dry matter (DM), and low-protein (LP) and high-protein (HP) starter feed contained 19.5 and 23.5% CP, respectively. The calves were weaned on d 60 and remained in the study until d 75. During the experiment, the calves received 4.2 kg of whole milk per day and had free access to fresh water and starter feed. The interaction between WS processing and protein content of starter tended to be significant for starter feed intake, average daily gain (ADG), and body weight (BW); calves fed HP-PWS tended to have greater ADG and final BW than other treatments. The results showed that feeding HP ground starter feed increased ADG and feed efficiency compared with LP groups during the preweaning and the overall periods. Moreover, weaning and final BW were higher in HP-fed calves than in LP-fed calves. Apparent digestibilities of acid detergent fiber (ADF), starch, and CP were greater in calves fed HP than in calves fed LP starter feed. The HP ground starter feed increased rumen propionate and ammonia concentrations. Wheat straw processing had no effect on intake and growth of calves but increased DM, ADF, and neutral detergent fiber digestibilities and decreased ruminal pH. Using processed wheat straw (PWS) mixed with starter feed tended to decrease rumination time and ruminal acetate concentration in calves. Final body barrel and withers height tended to be greater in calves fed PWS. Overall, the results indicated that HP content of ground starter feed (23.5%) could be recommended for Holstein calves. Furthermore, PWS inclusion in the ground starter diet increased fiber digestibility but had no effect on calf performance. Moreover, calves fed HP-PWS had greater ADG and final BW than other treatments.     

Identification of common cystic fibrosis mutations in African-Americans with cystic fibrosis increases the detection rate to 75%

Cystic fibrosis (CF)--an autosomal recessive disorder caused by mutations in CF transmembrane conductance regulator (CFTR) and characterized by abnormal chloride conduction across epithelial membranes, leading to chronic lung and exocrine pancreatic disease--is less common in African-Americans than in Caucasians. No large-scale studies of mutation identification and screening in African-American CF patients have been reported, to date. In this study, the entire coding and flanking intronic sequence of the CFTR gene was analyzed by denaturing gradient-gel electrophoresis and sequencing in an index group of 82 African-American CF chromosomes to identify mutations. One novel mutation, 3120+1G-->A, occurred with a frequency of 12.3% and was also detected in a native African patient. To establish frequencies, an additional group of 66 African-American CF chromosomes were screened for mutations identified in two or more African-American patients. Screening for 16 "common Caucasian" mutations identified 52% of CF alleles in African-Americans, while screening for 8 "common African" mutations accounted for an additional 23%. The combined detection rate of 75% was comparable to the sensitivity of mutation analysis in Caucasian CF patients. These results indicate that African-Americans have their own set of "common" CF mutations that originate from the native African population. Inclusion of these "common" mutations substantially improves CF mutation detection rates in African-Americans.