Force-field instability in surface grinding

In this paper, a particular kind of non-regenerative instability in surface grinding is studied. Clear evidences have been collected suggesting that vibrations can occur suddenly even during the first grinding pass, just after wheel dressing. These circumstances exclude workpiece and wheel surface regeneration as instability origin, whereas both surfaces have to be considered initially smooth. On these bases, the stability of the dynamic system constituted by an oscillating ideal wheel (namely without waviness on the surface) immerged in a positional and velocity-dependent process force field has been studied, demonstrating that, under particular conditions, the force field generates an unstable behaviour. The instability occurrence is strictly related to the oscillation direction of the wheel centre, according to the mode shape associated to the dominant resonance, with respect to the direction of the grinding force (identified by the ratio between its tangential and normal components). The analysis leads to the identification of a simple necessary condition for instability occurrence. The analytical results are confirmed by time-domain grinding simulations and compared with experimental evidences.     

Yeast vectors for the integration/expression of any sequence at the TYR1 locus

We have constructed new yeast vectors for targeted integration and conditional expression of any sequence at the Saccharomyces cerevisiae TYR1 locus which becomes disrupted. We show that vector integration is not neutral, causing prototrophy for tyrosine and auxotrophy for the vector's selectable marker (uracil or leucine, depending on the vector used). This feature allows a double screening of transformed yeast cells, improving the identification of colonies with the desired chromosomal structure. The GAL10 gene promoter has been added to drive conditional expression of cloned sequences. Using these vectors, chromosomal structure verification of recombinant clones is no longer necessary, since the noise of non-homologous recombination, as well as spontaneous reversion of the selected phenotype, can easily be identified. The ability of the vector to conditionally control gene expression has been confirmed using the gene for the green fluorescent protein (GFP) as a reporter.     

Delay and link utilization aware routing protocol for wireless multimedia sensor networks

Wireless Multimedia Sensor Networks (WMSNs) consist of networks of interconnected devices involved in retrieving multimedia content, such as, video, audio, acoustic, and scalar data, from the environment. The goal of these networks is optimized delivery of multimedia content based on quality of service (QoS) parameters, such as delay, jitter and distortion. In multimedia communications each packet has strict playout deadlines, thus late arriving packets and lost packets are treated equally. It is a challenging task to guarantee soft delay deadlines along with energy minimization, in resource constrained, high data rate WMSNs. Conventional layered approach does not provide optimal solution for guaranteeing soft delay deadlines due to the large amount of overhead involved at each layer. Cross layer approach is fast gaining popularity, due to its ability to exploit the interdependence between different layers, to guarantee QoS constraints like latency, distortion, reliability, throughput and error rate. The paper presents a channel utilization and delay aware routing (CUDAR) protocol for WMSNs. This protocol is based on a cross-layer approach, which provides soft end-to-end delay guarantees along with efficient utilization of resources. Extensive simulation analysis of CUDAR shows that it provides better delay guarantees than existing protocols and consequently reduces jitter and distortion in WMSN communication.     

Combined effect of lignosulfonate and carbonate on pure portland clinker compounds hydration. III. Hydration of tricalcium silicate alone and in the presence of tricalcium aluminate

The effect of carbonate and/or lignosulfonate on the hydration of C₃S alone and in the presence of C₃A has been examined by DTG and TG curves and by zeta potential measurements. The combined addition of sodium carbonate and lignosulfonate strongly retards C₃A hydration. However by mixing 20 % C₃A with C₃S the retarding effect is significantly lower. On the other hand the early C₃A hydration is completely blocked by sodium carbonate and lignosulfonate simultaneously added. It seems that the fluidifying effect of the combined addition of those admixtures could be ascribed to both the dispersing action and the completely blocking effect on the early C₃A hydration.     

Pigments profile in monovarietal virgin olive oils from various Italian olive varieties

This paper presents the investigation of the chlorophyll and carotenoid pigments composition in monovarietal virgin olive oils produced from the five main olive varieties (Minuta, Ottobratica, Calabrese, Ogliarola, Baddarica) cultivated in Sicily (southern Italy), from four main olive varieties (DolceAgogia, Moraiolo, Leccino, Frantoio) cultivated in Umbria (central Italy), and from three main olive varieties (Leccino, Oliva Nera di Collecorto, Noccioluta) cultivated in Molise (central Italy). Reversed-phase high performance liquid chromatography using a C-30 column with photodiode array detection was used for pigments analyses. In all, 19 compounds were identified and quantified in 60 olive oils samples. The qualitative pigments pattern was similar among the varieties investigated, whereas quantitative differences were found among the different cultivars; among the varieties investigated in this work, the oils from Umbria showed the highest pigment content (34.19 ppm in average), followed by the oils from Molise (18.61 ppm in average) and the oils from Sicily which showed the lowest pigment contents (13.38 ppm in average). In general, pheophytin a was the major component (range 0.49–19.42 ppm), followed by β-carotene (range 1.27–9.30 ppm) and lutein (range 0.44–5.12 ppm). Those differences may be due to genetic factors and/or geographical differences. Moreover, auroxanthin was detected for the first time in olive oils and was detected only in olive oils from Umbria and Molise regions. The ratio between the two isochromic pigment fractions, namely the ratio between the chlorophyll and carotenoid fractions showed an average value close to unity. The lutein/β-carotene ratio was less than one in the majority of the cases. These parameters, along with other analytical parameters, could be used as indicators of typicality in olive oils. The presence of a specific pigment profile in olive oils could infact be used to guarantee the genuineness of the product, since the quality control of food requires a precise knowledge of the pigments composition of the original products.     

Hyperazeotropic ethanol salted-out by extractive distillation. Theoretical evaluation and experimental check

A distillation process for the production of hyperazeotropic ethanol from a dilute wine obtained from the fermentation of biomass has been studied. This process utilizes the coupling of a soft preconcentration stage and of a dehydration stage based on the salting-out effect produced by calcium chloride on the ethanol in an aqueous solution, with the disappearance of the azeotrope. The salt is employed in a close cycle, due to the presence of a regeneration stage, therefore no consumption of calcium chloride is noticed.

The distillation process utilizes one column consisting of two sections operating at different pressures in order to reach an efficient heat recovery.

In this paper, a simplified flow-sheet of the process and the principal operating conditions of the distillation column are illustrated. When compared with other processes, conventional or under development, this one is characterized by the promising reduction of the specific energy requirement.

The operating conditions chosen for the distillation with salt have been experimentally checked using a laboratory column running continuously with calcium chloride as salting-out agent. Moreover, the experiments confirmed the reliability of the mathematical model of the process. Further experiments are in progress with the aim of utilizing a mixture of salts which can be fed from the bottom of the dehydration section back to the fermentor, so that the salt regeneration stage can be reduced.     

Water soluble trehalose-derived oligoamides

A new family of oligotrehaluronamides was synthesized through the polycondensation of α,α-trehaluronic acid dimethyl ester and different diamines or polyamines. In particular, diamines with different molecular structure (1,n-alkylene diamines, aromatic diamine, and alkyleneoxydiamine) were used in order to modulate the molecular weights and the physical characteristics of the products, such as T_g, hydrophilic or hydrophobic properties, and solubility. α,α-Trehaluronic acid was obtained from a renewable source as α,α-trehalose. The syntheses of oligotrehaluronamides were carried out in different solvents such as ethanol, methanol, THF and DMSO, using triethylamine as catalyst. All the compounds obtained in this study were characterized through FT-IR and NMR spectroscopy. The molecular weights were evaluated by ¹H-NMR and in some cases compared with those obtained from ESI-MS spectrometry. Glass transition temperatures and melting points were detected by differential scanning calorimetry. Low molecular weight oligoamides, containing several hydroxyl groups, are water-soluble and could be used in water-based formulations.     

Effects of Prior Annealing on the Spark Plasma Sintering of Nanostructured Y2O3 Powders

The effects produced by annealing Y₂O₃ nanopowders on their spark plasma sintering (SPS) behavior are systematically investigated in this work. It is found that the annealed powders display higher sinterability with respect to the as‐received ones. Indeed, the maximum densification level reached from pristine powders is about 97.5%, whereas density decreases when further increasing either the sintering temperature or the dwell time. In contrast, the density of SPS products obtained from pretreated powder monotonically increases with temperature and processing time, thus leading to fully dense materials in 30 min at 1050°C and 60 MPa. Correspondingly, it is found that the annealing treatment markedly inhibits grain coarsening during SPS. Thus, dense translucent samples with grain size below 100 nm can be attained from annealed powders. On the other hand, white‐opaque specimens with significantly coarser microstructures (up to 1‐μm‐sized grains) are obtained when pristine powders are directly processed under the same sintering conditions. Furthermore, it is observed that the annealing treatment of SPS samples in air allows for graphite contamination removal, whereas no improvement in term of light transmittance is produced.     

Zirconium and hafnium oxide interface with silicon: Computational study of stress and strain effects

Computations of the periodic double-interface MO₂/Si (M = Zr and Hf) systems using density functional theory (DFT) demonstrate that very thin epitaxial MO₂ layers at silicon (1 0 0) surface adopt anatase-like structure with six-coordinate M atoms, while tetragonal-like MO₂ structure with seven-coordinated M atoms has a lower stability (metastable). This results from a closer match between Si(1 0 0) surface unit cell and anatase-like ZrO₂ and HfO₂ leading to the overall stress reduction if MO₂ adopts the anatase-like structure on silicon. In agreement with the previous study of Gavartin et al. [Gavartin, Fonseca, Bersuker, Shluger, Microelectron. Eng. 80 (2005) 412–415] formation of oxygen vacancy at the interface is demonstrated to be lower than in bulk film. This result appears to be independent from the film or interface structure but originates from the energy balance between M–O, M–M, Si–O and M–Si bonds, as revealed by a simple molecular model.